Top 20 LG DR-4810 DVD Recorder Questions & Answers

type "LG LG4810V remote" into Ebay, take yur pick, there are loads.

I think you should take it back, cause! defective laser pickup, or the video processor, and possibly the audio/video cable, "replace to be sure"

Replace all power supply's capacitors that are on the secondary.

This should help solve the problem.

try Maxell from costcos, bestbuy or jandr ... (Dynex or Pansonic is good if you can not find Max)

The belt on the eject motor can be broken.

As long as the DVD is not copy protected, you can transfer contents onto your PC for viewing. You will need DVD player software which is usually pre-installed on most newer computers, and you can use various programs for coping the files. The Nero 9 Suite http://www.nero.com has programs that will allow you to do this or the NCH Software Suite http://www.nchsoftware.com/index.html has many utilities for video. There are many others available and likely some Shareware as well for this if you Google "Copy DVD to Hard Disk".
Hope this helps.
KC

Are you sure English translation not included at all in your manual?

Try this site:
http://safemanuals.com/user-guide-instructions-owner-manual/LG/DR4810-_E

Good luck
luciana44

it may be, because of your unit has component problems and needs service/. it means it takes long time to recognize the condition.

clean the laser , if that doesnt fix it, replace dvd loader

No, this is a fault with the unit, 99% of the time caused by the power supply, but I've seen it be caused by the MPEG pcb

PROGRESIVE SCAN will only work with an HD TV and it does not work via the scart lead. Select off for it if you have an old TV. If you can't get it to stop coming on by doing what it says to do, then you have an electrical fault on the LG.
PROGRESIVE SCAN itself is a method of getting high quality images on HD TV's via the special sockets at the back of the DVD.

Have you tried a different disc? Some discs do go faulty. Is the disc compatiable with the machine? Try erasing the disc and starting again.

1. Power on
2. Open DVD tray
3. Press 7 times 0 on the remote control
4. You will see a "Now zonefree" confirmation message on the screen.

hi , how are u friend
i have problem pls can y help me
lg dr4810 afiche in lcd (please wiat )

Have you tried a lens-cleaning disk? Data on DVDs is much more closely packed and so the weaker signal prehaps more likely to be lost to a dusty lens.

I had the same problem. It was fixed under warranty. It was some sort of alignment problem. It would not play SOME commercially produced DVD's either.

You can find the remote control codes for different brands of devices from
http://www.hifi-remote.com/ofa/codes-tv.shtml#tv

More help for programming your remote can be found here:
http://www.hifi-remote.com/manuals/ofa-l.shtml?URC-7800#device

Hope that helps! If that didn’t work, you will probably have to contact the manufacturer to get the code..

Thank you for using FIXYA!

Cheers!
IrishDruid

hmmm..ok...sounds like a video setting issue on the way in..you'll need to go to the menu, and reset the input settings, so it's in alignment...

how to known the service mode for thomson tv blackdiva