20 Most Recent Marantz RC5200 LCD Touchscreen Remote Control Questions & Answers


Maratz 5200 is dead

hi there. not sure if this link will help you out,but have a look,scroll down the page and you might find what you are trying to find out. Marantz RC5200 LCD Touchscreen Remote Control is dead Google Search
11/19/2017 2:17:01 PM • Marantz RC5200... • Answered on Nov 19, 2017

How to get user manual


I hope this is what you were looking for...

In case of a problem or clarification or my solution was insufficient, don't hesitate to post me a reply.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Best regards,
5/29/2011 6:54:20 AM • Marantz RC5200... • Answered on May 29, 2011

Was downloading a file and

How do I reset the RC5200

Carefully press the reset button inside the battery compartment of
the RC9200/5200 with a paperclip or sharp pencil. The
RC9200/5200 restarts and beeps to indicate it is ready for use.
If there is a problem stillthe software may need to be reinstalled, see below.

Restoring The Default Marantz software File Via PC
You can restore the default Marantz configuration on any Windows
PC with internet access by using your internet connection to
connect to www.marantz.com. Download RCEdit, a self installing
file. Install RCEditby double clicking on the downloaded file. Start
RCEdit from the Start button program menu. Connect your
RC9200/5200 to your PC. Once RCEdit is up and running, choose
Open Configuration from the file menu. Click on Samples and
double click on the file named “New_ RC9200/5200_Default.” Now,
from the file menu choose Download to RC9200/5200. The file will
download and the Marantz default file will be fully restored

also here is a link to the user manual

12/10/2009 11:55:38 PM • Marantz RC5200... • Answered on Dec 10, 2009

Remote for laptop


Try teamviewer its free for such personal remote control use http://www.teamviewer.com/index.aspx
12/13/2008 1:34:00 PM • Marantz RC5200... • Answered on Dec 13, 2008

Marantz ST7001 Tuner - "Internal" Switch won't work

The 'click' may be a relay failing to operate correctly
8/5/2021 4:25:17 AM • Marantz... • Answered on Aug 05, 2021

Marantz SR5002 fail to standby mode, will not reset

Power supply failure
7/30/2021 3:46:17 AM • Marantz... • Answered on Jul 30, 2021

My marantz mo. sr3100 power supply circuit 4diodes rectifier at ac. incoming in read s2v18 blown out unable to find replacement with net or ecg please acvise, Seri Anlipan.

You can use any rectifier diodes at power supply section. Refer some circuits, and you will get an ides. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ https://elektrotricks.blogspot.com/
2/18/2021 11:15:00 AM • Marantz... • Answered on Feb 18, 2021

Maranta sr6013. Volume will not go past 85.

Make certain DRC (night mode, or whatever your specific model calls it) is OFF, and Make sure that Audyssey Dynamic Volume is OFF and Audyssey Dynamic EQ is ON! The Dynamic Volume being ON is the most common cause of what you describe, as is directly limits the peak.
4/21/2019 3:15:50 PM • Marantz... • Answered on Apr 21, 2019

I just installed new lamp in marantz vp4001 projector and when it starts lamp comes on very dimmly displays WARMING UP for about 2 seconds then shuts back down with standby flashing red light

My first question is was it a Genuine Marantz replacement bulb, or simply a bulb advertised as "compatible". There are an overwhelming number of bad luck stories about Marantz owners trying to save a few dollars by purchasing non-Marantz bulbs, and they always regretted it. Usually the bulbs work for a brief time and then don't work. I would urge you, if you did buy a bogus "compatible" bulb, to buy a genuine replacement.
4/21/2019 3:11:30 PM • Marantz... • Answered on Apr 21, 2019

My Marantz SR3001 is not responding to the remote control?

If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/
3/12/2019 5:37:01 AM • Marantz... • Answered on Mar 12, 2019

I accidentally activated the child lock on my TV

Hi ,Resetting your tv will most likely solve that issue.
1/5/2018 6:54:59 PM • Marantz... • Answered on Jan 05, 2018
Not finding what you are looking for?
Marantz RC5200 LCD Touchscreen Remote Control Logo

12 questions posted

Ask a Question

Usually answered in minutes!

Top Marantz Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76799 Answers


Level 3 Expert

13435 Answers

Mandeep  Singh
Mandeep Singh

Level 3 Expert

1184 Answers

Are you a Marantz Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Marantz Televison & Video

  • Marantz Televison & Video

Most Popular Question

get user manual

  • Televison & Video