20 Most Recent Marantz SR-5200 Receiver - Page 6 Questions & Answers

0helpful
1answer

Marantz DH 9300 has power supply problem .need

I have a digital copy if you're interested
Thanks
3/26/2019 12:24:48 AM • Marantz Audio... • Answered on Mar 26, 2019
0helpful
1answer

How do I reset the Marantz receiver sr480

it is at the settings
3/6/2019 1:24:09 PM • Marantz Audio... • Answered on Mar 06, 2019
0helpful
1answer

I have marantz SR6200 amplifier. It just goes to standby mode. When I turn it on it shows me the volume and goes straight on standby mode. I have removed all the speakers yet it still goes to standby mode. Any one who can help me????.?

It does does this because At least one of the amp output may have gone bad carefully look inside front blown capacitors they usually are rounded on top instead of flat the way they usually are. replace with same mico ferret uf but a higher voltage rating for example a 16v should be upgraded to a 24v and so on this helps older units run better. Also remember there is soldering involved here and dc capacitors have polarity + and - so don't mix them up when replacing. good luck
2/13/2019 6:22:16 AM • Marantz Audio... • Answered on Feb 13, 2019
0helpful
1answer

I need the user manual for a Marantz SR-96U

Possible manual, for SR-96 (but doesn't specify SR-96U). https://www.manualslib.com/manual/1010603/Marantz-Sr-96.html Possible service manual, that include nameSR-96U) http://www.vintageshifi.com/repertoire-pdf/pdf/telecharge.php?pdf=Marantz-SR-96-Service-Manual.pdf
2/4/2019 1:45:26 AM • Marantz Audio... • Answered on Feb 04, 2019
0helpful
1answer

Hi where can I find the schematic diagram of marantz zs 5300

You likely already have a user manual but just in case...

https://www.manualslib.com/manual/294507/Marantz-Zs5300.html
12/24/2018 1:32:48 AM • Marantz Audio... • Answered on Dec 24, 2018
0helpful
1answer

I have a Marantz SR5003 reciever. When I connect my smart phone to aux 1 to listen to music through my Spotify app. I barely hear the music. What is the problem.

This will be a setting issue possibly the signal level for aux 1. Or the level on the phone itself.
11/26/2018 3:46:47 PM • Marantz Audio... • Answered on Nov 26, 2018
0helpful
2answers

I would like to improve the sound of my tv, can i connect the tv with my marantz pm32 amplifier?

Yes you should have rca connects for sound on your tv and can connect to aux on your marantz
10/29/2018 10:23:37 AM • Marantz Audio... • Answered on Oct 29, 2018
0helpful
1answer

My Marantz pm-42 amplifier has distortion on one channel. I have tried different speakers, cables and input sources but the problem still persists. Audio is fine through headphones. Please help. Pa

As the audio is good through the headphones it could be something to do with the headphone socket itself. When headphones are plugged in the socket has a switching mechanism that switches the speakers off. So something around the socket or the actual socket might be causing the problem.
10/19/2018 11:35:27 PM • Marantz Audio... • Answered on Oct 19, 2018
0helpful
1answer

My marantz s7000 volume wont go beyond +15.why?

Some Marantz unit have a max volume that can be set by the user. Look under the audio options of the unit and set a higher volume level.
10/1/2018 11:23:07 PM • Marantz Audio... • Answered on Oct 01, 2018
0helpful
1answer

Hi I have the amplifier marantz 2250 to power up the fuse break. Let me ask how that was done, and how to fix it, how much money

Fuses blow due to an overload, in amps it will be caused most likely by a short in the main power amp section. Probably one or more devices mounted on the main heat sink. The cause is often speaker cables that have shorted, or faulty speakers. The cost can be estimated by taking of the top cover of the unit. This should show the devices on the heat sink. If you see any burnt or damaged they have to be replaced. Each device will have a number on it. If you put the number into a search engine it should find the price of the part. Then you only have to see want they want for labour costs.
10/1/2018 11:09:48 PM • Marantz Audio... • Answered on Oct 01, 2018
0helpful
1answer

What is the "processor" in & Out function on the Marantz PM-68?

Some amps offer the entire signal out, to a processor, like a sub woofer. That system will shave the parts of the signal that it needs, ans passes the rest back to the amp for it to process. Your amp will not have to contend with the burden of processing the removed portion of the signal. Supposed to be more efficient and "truer".
8/31/2018 3:06:50 PM • Marantz Audio... • Answered on Aug 31, 2018
Not finding what you are looking for?
Marantz SR-5200 Receiver Logo

52 questions posted

Ask a Question

Usually answered in minutes!

Top Marantz Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

76851 Answers

Marvin
Marvin

Level 3 Expert

85241 Answers

Brad Brown

Level 3 Expert

19163 Answers

Are you a Marantz Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Marantz Audio Players & Recorders

  • Marantz Audio Players & Recorders

Most Popular Question

loss volume left channel

  • Audio Players & Recorders
Loading...