20 Most Recent Marantz SR-5200 Receiver - Page 5 Questions & Answers

0helpful
1answer

Marantz SR5200 don't have the remote. How can I increase the bass

https://audiokarma.org/forums/index.php?threads/marantz-sr7000-increasing-bass-w-o-remote.504810/
4/6/2020 3:06:29 PM • Marantz Audio... • Answered on Apr 06, 2020
0helpful
1answer
0helpful
2answers

Marantz sr 4000 powers up, but no sound

Try plugging in headphones, if they work, it sounds like outputs have blown,
10/28/2019 10:07:08 PM • Marantz Audio... • Answered on Oct 28, 2019
0answers
0helpful
2answers

Need to give a FULL RESET in a MARANTZ SR5004 RECEIVER

Switch off the unit. Then hold down Sorround, Exit, Memory & Clear buttons all together and then switch on the power. This should work.
6/12/2019 9:43:02 AM • Marantz Audio... • Answered on Jun 12, 2019
0helpful
1answer

Marantz 201 PMD is making a sort of static humming noise when I try to monitor the noise through headphones while recording. It doesn't happen when just playing tape. What is causing this?

Hello Meredith, for what you are saying, you could have a problem in the cable that you use to send the signal you want to record, or the microphone cable or the line cable put to record the Marantz, without any cable connected to the inputs and listen with the headphones, if the hum is, if not, try to change the cables for others of the same type, if you use microphone, controls the connectors, which do not have humidity or rust in the contacts I hope you can solve the problem Greetings Franco Dosil Hola Meredith, por lo que comentas, podrias tener un problema en el cable que utilizas para enviar la se?al que quieres grabar, o el cable de micr?fono o el cable de linea pon a grabar el Marantz, sin ning?n cable conectado en las entradas y escucha con los auriculares, si el zumbido esta, si no esta, prueba cambiar los cables por otros del mismo tipo, si usas micr?fono, controla los conectores, que no tengan humedad u oxido en los contactos Espero que puedas resolver el problema Saludos Franco Dosil https://www.hifiengine.com/hfe_downloads/index.php?marantz/marantz_pmd201_221_en.pdf
5/22/2019 10:06:23 PM • Marantz Audio... • Answered on May 22, 2019
0helpful
1answer

Good day i have marantz integrated amp. Model PM-55 have power all function button lights are working but no have sounds or signal output..what is the trouble of my amp..thanks

Hello Fernando, for what you say, your team has problems in the power output stage, the sound does not come out because there is a relay that is not activated as a result of that failure If you have technical knowledge to review it, I send you the link so you can download the service manual, but go to a specialized technical service I hope you can solve the problem Greetings Franco Dosil Hola Fernando, por lo que cuentas, tu equipo tiene problemas en la etapa de salida de potencia, el sonido no sale porque hay un rele que no esta activado a consecuencia de esa falla si tienes conocimientos tecnicos como para revisarlo, te envio el link para que puedas descargar el manual de servicio, sino dirigerete a u servicio tecnico especializado Espero que puedas resolver el problema Saludos Franco Dosil http://www.go-gddq.com/upload/2014-10/14100413443414.pdf
4/30/2019 4:52:39 AM • Marantz Audio... • Answered on Apr 30, 2019
0helpful
1answer

I have a marantz CP430. I had to replace the kit of 3 belts. Now, I have a new problem: that reads the audio cassettes at an accelerated speed. Does anyone have an idea of why this happens?

Hello Alessandro, if you have changed the three belts, it is very possible that the belt of the capstan, has been mounted on the edge of the motor pulley, which has a diameter may, therefore it will be faster the speed of the tape Re-disassemble and observe the location of this belt, verify that it has the same thickness as the original, also observe that the capstan are with their bushings well, clean well the surfaces where the belts work with Isopropyl alcohol If you have checked everything and do not find problems, you should adjust the speed of the motor, preferably with a 3 kHz cassette and a frequency meter or with an original, that you know the content I sent you the link to download the service manual I hope you can solve the problem Greetings Franco Dosil Hola Alessandro, si le has cambiado las tres correas,es muy posible que la correa del capstan, se haya montado sobre el borde de la polea del motor, que tiene un diametro mayos, por lo tanto va a estar mas rapida la velocidad de la cinta Vuelve a desarmar y observa la ubicacion de esta correa, verifica que tenga el mismo espesor que la original, tambien observa que los capstan esten con sus bujes bien, limpia bien las superficies donde trabajan las correas con alcohol Isopropilico Si has revisado todo y no encuentras problemas, deberas ajustar la velocidad del motor, preferentemente con un cassette de 3 khz y un frecuencimetro o con un original, que conozcas el contenido Te envio el link para que descargues el manual de servicio espero que puedas resolver el problema Saludos Franco Dosil https://data2.manualslib.com/pdf5/111/11042/1104156-marantz/cp430.pdf?97bb3b8270b593cd10eab88f1605db6e&take=binary
4/30/2019 3:22:01 AM • Marantz Audio... • Answered on Apr 30, 2019
0helpful
1answer

Why doesn't my new TCL Roku 4K tv recognize my Marantz NR1605 AV receiver?

Hello Gerry, what type of HDMI cable do you use for the interconnection, a 1.4 or a 2.0? With the 2.0 you ensure that both devices are within the communication range and therefore should be recognized Tell me the type of cable you use I wait your answer I sent you the link so you can download the user manual Greetings Franco Dosil Hola Gerry, que tipo de cable HDMI utilizas para la interconexion, un 1.4 o un 2.0? Con el 2.0 te aseguras de que ambos aparatos esten dentro del rango de comunicacion y por lo tanto deberian reconocerse Comentame el tipo de cable que utilizas Espero tu respuesta Te envio el link para que puedas descargar el manual de usuario Saludos Franco Dosil http://manuals.marantz.com/NR1605/NA/ES/download.php?filename=/NR1605/NA/ES/pdf/NR1605_NA_ES.pdf
4/30/2019 12:13:46 AM • Marantz Audio... • Answered on Apr 30, 2019
0helpful
1answer

Marantz cd17 ki -5volt dc on lh audio out causing speaker cone to move significantly

Hello John, yes, having 5 volts DC in the output of your Marantz, will make the speakers move a lot The weird thing is that you have that tension in the audio output of the CD17 If you have technical knowledge, you should check the audio output, mainly Mute transistors or DC decoupling capacitors I am sending you the link so you can download the service manual I hope you can solve the problem Greetings Franco Dosil Hola John, si, tener 5 volts DC en la salida de tu Marantz, har? mover mucho los parlantes Lo raro es que tengas esa tensi?n en la salida de audio del CD17 Si tienes conocimientos t?cnicos, tendr?as que revisar la salida de audio, principalmente los transistores de Mute o los capacitores de desacople de DC Te estoy enviando el link para que puedas descargar el manual de servicio Espero puedas resolver el problema Saludos Franco Dosil http://www.hifisounds.co.uk/manuals/Marantz-CD17MK3%20cd.pdf
4/29/2019 11:55:50 PM • Marantz Audio... • Answered on Apr 29, 2019
0helpful
1answer

I have a marantz sr8002 can I hook up a power amp to run my front speakers that need more power if so how?

Hello Nate, if you can connect an amplifier to the front channels of your Marantz, to reinforce the sound For that you have to take the audio signal from the PreOut RCA connections on the back of the SR8002, L output and R output and these 2 signals are sent to the input of your booster amplifier I send you the link of the user manual and on page 10 you can see the back panel of your Marantz and identified with the number 12, the "PreOut" exits area, there are located the exits that I mentioned I hope you can listen with more presence to the front channels of your audio system Greetings Franco Dosil Hola Nate, si puedes conectar un amplificador a los canales frontales de tu Marantz, para reforzar el sonido Para eso tienes que tomar la se?al de audio de las conexiones RCA de PreOut en la parte posterior del SR8002, salida L y salida R y estas 2 se?ales las env?as a la entrada de tu amplificador de refuerzo Te env?o el link del manual de usuario y en la pagina 10 podr?s observar el panel posterior de tu Marantz e identificado con el numero 12, el area de salidas "PreOut", ah? est?n ubicadas las salidas que te he mencionado Espero que puedas escuchar con mas presencia los canales frontales de tu sistema de audio Saludos Franco Dosil https://www.manualslib.com/products/Marantz-Sr8002-15515.html
4/29/2019 11:39:25 PM • Marantz Audio... • Answered on Apr 29, 2019
0helpful
1answer

Marantz SR60 - No Radio sound Speakers output

Hello Tvin, I have read what you have put, depending on that look for the service manual and I told you that it is very possible that the amplifier stage works well, you can check it, if you have a CD player or another sound source, if you listen, definitely the amplifier stage, it works Regarding what you observe that when you look for the stations, your Marantz tunes them, which does not indicate that the sound comes out, I tell you why, there are several stages within the radio, The stage of tuning and location of the stations, is the one that indicates that it found the station and it indicates it in the display, next there is the stage decoder stereo and audio output, this stage is the one that is in conflict If you have technical knowledge, I will send you the link of the service manual, but look for a specialized technical service I hope you can listen soon, the radio stations in your Marantz Greetings Franco Dosil Hola Tvin, he le?do lo que has puesto, en funci?n de eso busque el manual de servicio y te comento que es muy posible que la etapa amplificadora funcione bien, puedes comprobarlo, si tienes un reproductor de CD u otra Fuente de sonido, si lo escuchas, definitivamente la etapa del amplificador, funciona Respecto a lo que observas que cuando buscas las estaciones, tu Marantz las sintoniza, lo que no indica que el sonido salga, te cuento el porque, existen varias etapas dentro de la radio, La etapa de sintonia y ubicaci?n de las estaciones, es la que indica que encontr? la estaci?n y lo indica en el display, a continuaci?n esta la etapa decodificadora est?reo y salida de audio, esta etapa es la que esta en conflicto Si tienes conocimientos t?cnicos, te env?o el link del manual de servicio, sino busca un servicio t?cnico especializado Espero puedas escuchar pronto, las estaciones de radio en tu Marantz Saludos Franco Dosil https://www.vintageshifi.com/repertoire-pdf/pdf/telecharge.php?pdf=Marantz-SR-60-L-Service-Manual.pdf
4/29/2019 11:14:45 PM • Marantz Audio... • Answered on Apr 29, 2019
0answers
Not finding what you are looking for?
Marantz SR-5200 Receiver Logo

52 questions posted

Ask a Question

Usually answered in minutes!

Top Marantz Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

76851 Answers

Marvin
Marvin

Level 3 Expert

85241 Answers

Brad Brown

Level 3 Expert

19165 Answers

Are you a Marantz Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Marantz Audio Players & Recorders

  • Marantz Audio Players & Recorders

Most Popular Question

loss volume left channel

  • Audio Players & Recorders
Loading...