20 Most Recent Marantz SR-5200 Receiver - Page 2 Questions & Answers

0helpful
1answer

My marantz sr5200 dont reproduce dobly digital

I have the Marantz SR5200, unable to get the Set-up / t.tone button to work, don't have the instructions,
6/21/2011 10:19:23 AM • Marantz SR-5200... • Answered on Jun 21, 2011
0helpful
1answer

Sr5200, when using the

Push TUNER button twice, it will switch betwin AM and FM.
1/4/2010 6:15:46 AM • Marantz SR-5200... • Answered on Jan 04, 2010
0helpful
1answer

Had not used my system for a year or so, Tried to

How do you know it is getting power? Are you comfortable with voltage measurments? Most newer systems like this have a momentary switch that controls a relay which in turn cycles the power for the switching power supply. I would either suspect a bad contact in that relay (corrosion due to lack of use) or a possible blow fuse. Can't really say for sure without seeing it. Please don't attempt if you are not comfortable with this type of work. Good Luck!
12/13/2009 11:47:24 PM • Marantz SR-5200... • Answered on Dec 13, 2009
0helpful
1answer

One channel not working (no output) when useing various modes

Hello

I had a similar problem, now to be honest there is quite a couple of things that could be faulty. I dont know which cable you are using between the source and the amp, but i am using RCA to mini jack.

I had the same problem that my tuner on amp played through all channels dvd as well, but as soon as i hook up the amp to my computer only some of the chanels played.

I found out that there is actually mono and stereo versions of of that cable thus, if you use a external source and channel it trough the amp with a mono cable, only some channels will be playing.
If you use a stereo cable both channels will work.

The other problem could just be a simple setting on the amp itself.
Usually you can set the number of channels you want the amp to be set on. It is very simple, locate this function an try every setting untill you hear that all channels are working.

It could also be an "ic" on the heatsink of the amp which overheated, if you open up the amp you will be able to see it instantly. This will explain the slight sound you manage to hear.

My advice is to try the first and second sollution and as a last resort send it to a repair shop or if you still have warrenty send it back. I doubt that it is a hardware problem on the amp itself.

Please rate this.

Best regards
9/25/2009 3:04:53 PM • Marantz SR-5200... • Answered on Sep 25, 2009
0helpful
1answer

No video from dvd

You could possibly have a faulty set of RCA cables. Happens all to often. Change your RCA cables (Red,White,Yellow). And make sure they are inserted good. If problem still presists. you could have a short in your inputs on either you dvd player or your t.v.
8/31/2009 11:14:06 PM • Marantz SR-5200... • Answered on Aug 31, 2009
0helpful
4answers

Statics and hissing...

I also have the same fault, The static noise is coming out
of ic720 [ cs4391 or cs4392 ]on digi pcb which is D-A converter
this ic maybe faulty, i have ordered a replacement ic and will
post here if solves problem
4/28/2009 3:45:41 PM • Marantz SR-5200... • Answered on Apr 28, 2009
0helpful
1answer

Receiver Sr5200 shut down in 5.1 mode

chances are you have the volume too loud and the speaker wires are crossed.
all speaker wires need to be with the positive on the right and negative on the left if you have them anywhichway than it will work on low volume and not a very good sound.
look closely at the wires and they should have a red or so color on one side or the wire jacket itself will have a round side and a flat side
4/21/2009 11:27:04 PM • Marantz SR-5200... • Answered on Apr 21, 2009
0helpful
1answer

Marantz sr4200

I use a Logitec Harmony 520 programmable remote. I pay 80$canadian.
http://www.logitech.com/index.cfm/440/371&cl=ca,en&hub=1?selectedcrid=440&selectedcid=371
3/8/2009 12:53:34 AM • Marantz SR-5200... • Answered on Mar 08, 2009
0helpful
1answer

No sound out of speakers (Marantz SR5200 receiver)

sounds like you might need to open it up and check the speaker wires that you plug your speakers up to it might be lose or something else like that cause it happened to me before and that was it.
2/21/2009 8:19:12 PM • Marantz SR-5200... • Answered on Feb 21, 2009
0helpful
1answer

Marantz SR5200 receiver works only with remote not manually

Check for a stuck/jammed switch, press each switch if one doesn't make a normal click sound or it doesn't move at all that's your problem.
If that's not it check the owners manual for how to reset the receiver (not all manuals will tell you how to reset it) Another way to reset it is to short the memory cap, but that is better left to a tech.
2/13/2009 3:09:35 AM • Marantz SR-5200... • Answered on Feb 13, 2009
0helpful
1answer

Total loss of sound...what to do?

please repeat your setting first- and then disconnect all speaker out.
connect your speaker one by one until you find the bad one and change it-you can also apply contact cleaner spray over volume control and move it many times-please do not forget yo unplug headphone jack first.
12/28/2008 3:15:21 PM • Marantz SR-5200... • Answered on Dec 28, 2008
0helpful
2answers

Volume control problem

bring good contact luricat cleaner from near radio shack and apply it over volume and move it forward and backward many times.
9/2/2008 1:36:33 AM • Marantz SR-5200... • Answered on Sep 02, 2008
0helpful
1answer

Marantz SR-5200 - Analog inputs only play the right channel

please invert your cable and watch if the problem moved the problem in your cable change it with new one.from any radio shack near you or any electronic store.
7/6/2008 10:40:19 PM • Marantz SR-5200... • Answered on Jul 06, 2008
0helpful
1answer

Shuts out after 10 minutes

please repeat your setting first- and then connect your speaker one by one until you find the bad one(after every connection you must test)-when you find the bad one change its cable first then change speaker itself.-if all above failed you must contact service center near you.
7/6/2008 9:01:28 PM • Marantz SR-5200... • Answered on Jul 06, 2008
0helpful
1answer

Power shuts off after 2 or 3 sec.

please remove all speaker from receiver-volume down and test if the receiver shut down it needs to fix in service center-if not insert speaker one by one until you find the bad one-change its cable first and then change speaker itself.
7/6/2008 8:54:34 PM • Marantz SR-5200... • Answered on Jul 06, 2008
Not finding what you are looking for?
Marantz SR-5200 Receiver Logo

52 questions posted

Ask a Question

Usually answered in minutes!

Top Marantz Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

76851 Answers

Marvin
Marvin

Level 3 Expert

85241 Answers

Brad Brown

Level 3 Expert

19165 Answers

Are you a Marantz Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Marantz Audio Players & Recorders

  • Marantz Audio Players & Recorders

Most Popular Question

loss volume left channel

  • Audio Players & Recorders
Loading...