First, this us a very old system and probably needs to be replaced if it really is an R12 system. The unit is probably at least 40 years or more old since they stopped producing R12 about 1970's. If your manitowac ice machine is usable still, it probably has lost its charge and will need to be refilled with a suitable refrigerant. I actually still have a jug of R12, but I generally charge systems with the only substitute still available R420 if you can find someone who still sells it. I saw that both refrigerant were being phased out and purchased a couple of jugs and only have a little left. My suggestion if you want this ice machine in operation again take it to an ice machine repairman and have him repair it. Good luck.

Manitowoc... | Answered on May 29, 2019 | 136 views

1 Answer

I HAVE MANITOWOC ICE MACHENE MODELIY0304A-161 AND SCREEN SHOWES HPOC ACTIVE

High Pressure warning.

Usually overheating of compressor.
Check that ventilation is not blocked.

Manitowoc... | Answered on Mar 25, 2019 | 139 views

1 Answer

My Manitowoc Ice machine will not produce ice. The harvest light is on and it will run through the clean cycle

Hi, contact your local appliance repair facility, you may have problems with the control board, the ice level sensors or curtain.

Manitowoc... | Answered on Dec 20, 2017 | 440 views

1 Answer

Manitowoc series 400 not making ice water is running what is the problem

Check compressor, is it running?

If you need further help, I’m available over the phone at https://www.6ya.com/expert/jerry_8a145f1328fa119f

Manitowoc... | Answered on Sep 08, 2016 | 509 views

2 Answers

What chemical do i use to clean evaporator coil?

nickel safe green stuff. FDA approved. check my service call video on Manitowoc deep clean.

Manitowoc... | Answered on Jan 16, 2016 | 298 views

2 Answers

Water does not run to evaporator

water pump

Manitowoc... | Answered on Aug 23, 2015 | 315 views

1 Answer

Manitowoc remot ice machine startup working then

You might need maintenance done by profi.

Manitowoc... | Answered on Aug 01, 2015 | 257 views

1 Answer

SVice manual for edo403w

Go to, www.manitowacicice.com/minisite/service/servicedownloads

Manitowoc... | Answered on Jan 12, 2015 | 73 views

1 Answer

How to install water chilled lines

You should have this done by a service company.

Manitowoc... | Answered on Oct 10, 2014 | 112 views

1 Answer

Should discharge pressure drop enough to shut off condenser fans during harvest, cvd2075? headmaster bypasses briefly then closes not clearing the plates.5

Depends on ambient temperature but in general yes. Plates may need cleaning or may have worn out. Don't know model and serial number of the inside head. You may want to look up your service manual here http://www.manitowocice.com/?xhtml=xhtml/mii/us/en/homepage/default.html&xsl=homepage.xsl
and compare your pressures to the posted norms.

Manitowoc... | Answered on Mar 30, 2014 | 123 views

1 Answer

Sd0452a stuck in clean mode

When a Manitowoc is turned on in clean mode, It stays in clean mode until it finishes (about 30 minutes).If you turn it off and then on again,it just keeps cleaning. Let it run in cleaning mode until it finishes then turn the witch to ice mode.

Manitowoc... | Answered on Mar 30, 2014 | 926 views

1 Answer

Aicok model MSF-013 19 function bread machine. Why doesn't control panel turn on or light up display?

good question

Kitchen... | Answered Yesterday | 16 views

1 Answer

I have a westbend bread maker new makes a 3lb loaf when it is time to knead it jumps all over my counter every time that knead cycle comes on I have tried to manualy lock pan it wont

Sounds like your dough is a bit too dry. Most breadmakers have rubber feet, or even suction cups to stop them moving. I have Sourdough bread in the oven now, made traditionally. I started at 10:15 this morning!

Kitchen... | Answered 2 days ago | 12 views

1 Answer