Top 20
Jack Lalanne Countertop Juicer PJP - Page 9 Questions & Answers
Hi, my Breville Fountain model JE95XL does not
if you can tear apart look inside bottom screws look at motor if brushes did not just smoke and or check if does have power to motor when on be careful ...8-10 times most it died because of too much heat of the fuse link size of a asprin pill when it gets up to , thet call it a thermal fuse one over heated it blows and you throw away i dont i fix.SF139E-142 Degree Thermal Cutoff Fuse 110-250V Instant .look up google to see pic .electronics store sell them or online i would mention radio shack but all on line mow a days ..good luck >^.^<
9/22/2013 8:17:25 PM •
Juicers
•
198 views • 0 helpful votes
Eduardo Indang sss contribution.
I've tried all suggestions how to remove the strainer, nothing is working it's stuck in there. Tried to find a # to call CS and they are in Canada only. I can't get the strainer out.
8/5/2013 12:47:14 PM •
Juicers
•
205 views • 0 helpful votes
I need a juice tiger deluxe manual only
Who makes this, the model number would be great as well. Here is a site which has a ton of online manuals for juicers and other products. Since I couldn't find yours as named, you may find it, if so -- let us know. Otherwise, give me more info on who made it and model number. I can usually find a pdf which i can email. Good care.
6/11/2013 1:43:06 AM •
Juicers
•
294 views • 0 helpful votes
Can you help me find the manual?
We may be able to help you find the manual but only if you could tell us the make and model juicer for which you'd like the manual.
6/8/2013 10:33:56 PM •
Juicers
•
147 views • 0 helpful votes
Homemaker juicer HY-5028 the sieve wont come out
The small pores of sieve cells and the larger ones of sieve elements are traversed by strands of cytoplasm called P-protein. It is not known whether P-protein is active in transport or merely serves as a seal against leakage in case of injury. See also phloem.
12/25/2012 10:08:24 PM •
Juicers
•
608 views • 0 helpful votes
Dash juicer wont turn on
Just fixed this problem!Take bottom off juicer. The 4th screw is an "odd" one...I drilled the center out and used a flat head.When you look up inside the juicer, you will see a silver lever arm. It touches the arm lock mechanism (so the juicer will only run when the arm is engaged).The lever arm should be behind the black lever arm part on the side. When I opened mine up, the silver level arm was on top of the black post thingy. I took a screwdriver and pushed it off the black post thingy, so it the very bottom of the silver lever is behind it. (I can no longer see the entire silver lever easily when it is in the correct position.)Totally fixed it.I think it bounced out of the correct spot when I juiced some hard veggies or when I moved it, it hit the counter pretty hard. Anyway, good luck....I am not a mechanic so sorry if the language is non-technical.:)
10/5/2012 4:39:52 AM •
Juicers
•
4,845 views • 1 helpful votes
Manual
Will any manual serve, or do you have something specific in mind?
3/8/2013 10:02:23 PM •
Juicers
•
46 views • 0 helpful votes
WelBilt juice extractor JE 200 owners manual
Thank you, thank you, THANK YOU! I turned my Welbilt JE200 upside down & it easily came apart. Also, for the tiny spaces, never underestimate the power of the 3 best cleaning tools: bamboo skewers, Q-tips & an old toothbrush.
11/26/2012 10:32:36 PM •
Juicers
•
426 views • 0 helpful votes
Big boss juicer won't work
I had the same problem. Mine completely stopped working after I put a small carrot in there. Can't find a customer service number for them. I did find an email for Antoinette Ramos.
[email protected] She emailed me back and said they would send me a new Juicer. Almost 20 days later, I have not received it and I can't get a reply email from her at all. I just looked at the email and her phone number is on there, so I will be calling. Here it is incase you still need it.800-423-4248Good luck.Jayme
8/2/2012 1:05:11 AM •
Juicers
•
1,799 views • 2 helpful votes
Braun MP50 juicer problems
I suspect you have solved the problem by now, if not, this worked for me. First unscrew the white center screw. Then as you lift up on the metal basket you should see the black center screw lift slightly. while holding upward pressure on the basket, tap the black center screw down. the basket and cutting disk should pop free.
hope this helps.
8/7/2012 5:46:26 PM •
Juicers
•
467 views • 0 helpful votes
Not finding what you are looking for?