20 Most Recent
Epson EMP-74L Multimedia Projector Questions & Answers
Epson EMP-62
What do you mean, view sky through projector? Do you mean you have a camera outside, and you want to project the video from the camera with the projector? It depends what your video source is.
The cables also depend on what your source(s) have for output
The PS2 may have composite, S-Video and component outputs - check your unit
You do not need a TV
The projector will display whatever source you give it with the appropriate video connectors and resolution
Here are the specifications for the projector
https://www.manualslib.com/manual/237793/Epson-Emp-62.html
it is 800 x 600 Dots (SVGA) resolution
It has an analog VGA input (D-Sub connector)
And it has Composite and SVideo and component video inputs for analog input
It does not take a digital video signal (DVI, HDMI, DisplayPort)
It has a stereo minijack for audio output (like a phone or iPod) so you can send stereo audio to your speaker set
I hooked up my Think
Hi,
Do the following for setting the screen.
1. Press the Menu button
2. Select Projection
In the Projection option,
Select Front : When the projector is in front of the
screen.
Select Front/Ceiling : When the projector is in front of the
screen and suspended from the ceiling.
Select Rear : When the projector is behind the
screen.
Select Rear/Ceiling : When the projector is behind the
screen and suspended from the ceiling.
ok
Uneven red color from left to right in the
you have a fried light filter on one of the lcd panels, due to excessive dust and heat. you will need to replace the entire optical engine, as epson does not sell individual pieces of it.
Our projector is flickering
replace the colorwheel. if it doesn't spin correctly or is unbalanced, it'll flicker and eventually go out.
Picture projected upside down
1-press menu button 2- press down arrow and go to setting and press enter3-go to screen and press enter.4-go to projection and press enter. select front and press enter.
Epson lq-690II printer reflects the paper when printing
Troubleshooting Paper Reversal in Printers:
*Confirm that options related to paper handling are set correctly by checking for specific buttons or switches that relate to paper handling or reversing.
*Ensure that paper is loaded properly to avoid feeding problems.
*Remove any dust, particles, or paper remnants from the rollers, as they can impede paper flow.
*If other measures fail, reset the printer to its initial settings to resolve potential software glitches.
EPSON 15140 error 034019
Try a hard reset of the printer. Oddly, the 034019 is not an error code, I have reason to think. It is a contact number, I believe.
Reset my Epson printer L382
Follow the steps given below to reset Epson L382 printer.
Step 1: Turn the printer off.
Step 2: Press and hold the reset button which is on the back of the printer using a paper clip or tip of a pen.
Step 3: Turn on the printer by holding the Power & reset button and continue to hold both the buttons.
Step 4: Wait for 5 seconds and a warning sheet will print. Release the reset button.
Step 5: After 5 seconds, another sheet will print which will show the IP address of the printer.
hold the reset button which is on the back of the printer using a paper clip or tip of a pen.
WHERE IS RESET BUTON? I CANT FIND IT.
I have Epson printer workforce pro c5790 shows error 000101, what is the solution for it ?
The error code 000101 on an Epson Workforce Pro C5790 printer typically indicates a problem with the print head.
Here are some steps you can try to troubleshoot and fix the issue:
- Perform a print head cleaning: From the printer's control panel, navigate to the Maintenance menu and select the option to perform a print head cleaning. This will help to clear any clogged nozzles or debris that may be causing the error.
- Perform a print head alignment: From the printer's control panel, navigate to the Maintenance menu and select the option to perform a print head alignment. This will help to ensure that the print head is properly aligned and is able to print correctly.
- Check for any physical obstructions or debris in the print head area, if you find any, remove it carefully.
- If the error persists after trying the above steps, you may need to replace the print head.
- If none of the above steps work, it is possible that the printer has a more serious problem that requires professional service.
I recommend you to check the user manual or contact Epson technical support for further assistance and specific troubleshooting steps for your printer.
Not finding what you are looking for?