20 Most Recent Proscan PS27108 TV Questions & Answers


parece que tiene un "codigo" para bloquear los canales 3,4 y line-in, trata de dejarlo desconnectado por 24 horas, lo he oido en algun lado!, y se supone que se borre el codigo!

Proscan PS27108... | Answered on May 07, 2013


You may view/download the manual here.

Proscan PS27108... | Answered on Mar 03, 2013


Tune it to channel 90 - S-video, 91 - input 1 or 92 - input 2.

tom

Proscan PS27108... | Answered on Jun 18, 2012


sound ok nopicture

Proscan PS27108... | Answered on Mar 23, 2011


Try website like Remotes.com buy a new remote same as ur original remote.

Proscan PS27108... | Answered on Nov 26, 2010


Hi


Thanks for using FixYa. Please check that the Close Captioning (CC) feature is not on. Please do accept the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Proscan PS27108... | Answered on Jul 07, 2010


Hi.

The problem is usually with Comcast connection. Pixelation and bad or freezing picure are caused by bad cable signal.

All you can do as user is replacing the coax cable from the wall box or splitter. If you use a Comcast receiver box, also replace the video cable from box to TV, and eventually test the box on a different video connection.

If that does not fix the problem you will need to contact Comcast, as the fault is usually with cable lines or box(when present), and definitively it is not caused by a fault on your TV.

Here contact page: Contact Comcast | Customer Service.

Regards.

Ginko.

Proscan PS27108... | Answered on May 15, 2010


You would go into the menus to adjust the picture settings. Press the menu button repeatedly until you get the 'video' menu hilighted, then press the 'select' or enter or whatever button chooses, and then use the left and right arrows to adjust the settings, and the menu button to advance to the next selection.
tom

Proscan PS27108... | Answered on Dec 22, 2009


The ProScan will accept input on input 90/91/92 using the connectors on the backside. You can use S-video[the little round black connector] or the composite video [yellow connector] for the video in and use the red / white pair for audio in.
90 selects S-video and audio 1 in
91 selects composite and audio 1 in
92 selects composite in 2 and audio 2 in
Connect these cords to the S-video or composite yellow output, and the Red-right White- left audio outputs on the DVD.
If you don't want to do this, get a RF modulator ~$15, and connect the yellow/red/white from the DVD output to the inputs on the modulator, and then connect the RF [cable] output of the modulator to the antenna input on the ProScan, and tune channel 3 or 4.
tom

Proscan PS27108... | Answered on Dec 22, 2009


select channel below 2 or press source/video switch on remote- if all else fails use an RF converter to use on channel 3 - Google "RF converter" to see what I mean

Proscan PS27108... | Answered on Oct 27, 2009


hay friend take tyme and resolder all capacitors if sound contine cheak all capacitor with multimeter changeing sysstem storeing of power dischargeing loose connected if not noise sencer ic is overflowing too much presure volte

Proscan PS27108... | Answered on Apr 23, 2009


do you have chassis number example ctc195 or CTC203 find out an let me know email me

Proscan PS27108... | Answered on Apr 05, 2009


Your set could be losing the 5v to the system control chip, or the keys on the remote or front panel may be sticking. You could also have a power supply with diodes or capacitors that are dying.
If you don't know how to service this, don't even bother opening the cover.
tom

Proscan PS27108... | Answered on Feb 27, 2009


No, you will need an ATSC tuner box that will receive digital signals from the antenna and convert them to channel 3 or 4, and put the video and audio out on RCA plugs - yellow, red, and white.
tom

Proscan PS27108... | Answered on Feb 27, 2009


Try two different things 1) on some of these tv's you could try pressing 00 to see if it will put you in input mode or 2) with your remote you should be able to push the input or tv/video to go to the input selection . In both of the above make sure you push the tv button first then step 1 or 2 . Good luck

Proscan PS27108... | Answered on Feb 27, 2009

Not finding what you are looking for?
Televison & Video Logo

Popular Tags

29 questions posted

Ask a Question

Usually answered in minutes!

Top Proscan Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76466 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Cindy Wells

Level 3 Expert

6222 Answers

Are you a Proscan Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Proscan Televison & Video

  • Proscan Televison & Video

Most Popular Question

change inputs lines watch dvd vcr using

  • Televison & Video
Loading...