Questions & Answers
I cannot get the top
1. Turn off the PS3 system.
2. Make sure the gun and the sensor bar both have batteries in them, and the sensor bar is placed either above or below the TV.
3. Remove the USB connector from the end of the stock.
4. Turn on the sensor bar.
5. Connect the USB connector to the PS3 system.
6. Turn on the PS3 system.
7. Press the PS3 button on the gun.
8. Press the Connect button on the end of the USB connector.
9. Press the PS3 button on the Gun again.
10. Gun must be pointed at the sensor bar to pick it up.
This should fix your problem. Merry Christmas!!!!
1,823 views | 0 helpful votes
I am having a problem.
Direct3D 6? Wow, the game must be way older than your computer. You probably installed DirectX 10 or later. There were major changes after DirectX 9. The software routines to manage graphics hardware acceleration through DirectX 10 or newer are probably very different from DirectX 6, so the game's graphic controller interface can't find them.
Try going into the game properties (right-click on the main executable file and select Properties from the pop-up menu).
Set it to run in XP compatibility mode and see what happens.
Check to see if the game has the option to run without hardware acceleration. If this provides acceptable performance, that is your answer.
If necessary (and if Microsoft still makes it available), try installing DirectX 6. Vista may snag on it and make you remove it and reinstall a newer version, but it's worth a shot if the other fixes don't work.
80 views | 0 helpful votes
Www xbox com support
Cause that game needs a new dash.Check what dash you are currently on by going to system settings and system info you will see the kernel there .it most likely is an old version so download this one( http;//download.digiex.net/Consoles/Xbox360/Dashboards/2.0.16747.0.zip)
1.) Unrar the download (i use winzip)
2.) Copy the $SystemUpdate folder to the root of a pc formatted USB Stick (The memory stick must be FAT or Fat32 formatted)
3.)With that extracted folder now on your USB, Insert the USB Stick into your Xbox 360 console.
4.) You will be automatically prompted to update with a USB stick. Power down the 360 and power it on again. You should be ask to update before the 360 boots to the dashboard.Click yes and wait for it to install then shut down.
5.) Once the update is complete your Xbox 360 will restart then boot up to the new dashboard.
95 views | 0 helpful votes
Www xbox com support
that message can mean two things to consider.(1) If you trying to play a backup(copy) of the game and your box is not flashed then it will show that (2) if you only using original games then it can mean either your disc is damaged ,has a few scratches on it therefore the laser cannot read the data properly. it could also mean that your laser is dying .this happens when you get into the habit of playing scratched media .it shortens the life of your laser. in the case where you trying to play a copied disc,then it is either a cheap media disc or scratched or incorrectly burned.use image burn and make an iso of the game and burn it at no faster than 4 speed.
97 views | 0 helpful votes
Not finding what you are looking for?