Top 20 Polaroid LCD-1700 17 in. Television Questions & Answers

Blown fuse caused by a shorted power supply. Relacing the power supply board should solve the issue in most cases. You can get a power supply board from www.tvrepairworld.com

Have you tried shopjimmy.com, discount-merchant.com, vancebaldwin.com

You have either failed 24vdc power supply section or the bad back lights inverter board is out.
Please see my basic troubleshooting guide here:
http://s807.photobucket.com/home/budm/allalbums
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
Parts: try www.shopjimmy.com or Ebay

The backlight inverter board may be going bad or the power supply problem. Look for bad capacitors.
http://en.wikipedia.org/wiki/Capacitor_plague

turn off the closed captions - you have it in text mode that will have a big black box with video on the sides
thanks
scott

um sometimes u cannot hook s video n rca jacks at same time do not ask why try just using one or other

If your Polaroid Roku TV is working fine but the red light is continuously flashing, it could indicate an issue that may need attention. Here are some steps you can try to troubleshoot the problem:

1. Power Cycle:
   • Turn off the TV and unplug it from the power source.
   • Wait for at least 5 minutes.
   • Plug the TV back in and turn it on.
2. Check Remote Control:
   • Ensure that there are no stuck buttons on the remote control. Press each button to make sure they are not stuck in the pressed position.
3. Update Firmware:
   • Check if there is a firmware update available for your TV. You can usually find this information in the TV's settings menu.
4. Reset to Factory Settings:
   • Perform a factory reset on your TV. This will erase your settings, so be sure to back up any important information first.
5. Check for Physical Obstructions:
   • Make sure there are no physical obstructions around the TV, particularly around the infrared sensor on the TV and the remote control.
6. Contact Customer Support:
   • If the issue persists and your TV is still under warranty, consider contacting Polaroid customer support for assistance. They may be able to provide additional troubleshooting steps or offer a solution.
7. Professional Repair:
   • If the TV is no longer under warranty and the issue persists, it might be advisable to consult a professional technician or a TV repair service to diagnose and fix the problem.

Always refer to your TV's user manual for specific instructions related to your model. If none of the above steps resolve the issue, it's recommended to seek assistance from the manufacturer or a qualified technician for further diagnosis and repair.

See Hints and Tips section of manual on page 36. Your problem is discussed there. Help And Tips - Polaroid 19" HD-READY User Manual [Page 39] ' ManualsLib

First is a link to a codes page. Next is a description of programming the device. The code page strikes me a little confusing about the method so that is why I provide the description of programming. Polaroid TV Universal Remote Codes & Program Instructions - Universal Remote Codes

1. Turn on your Polaroid TV.
2. Press and hold the SET button on your SANSAI URC-L969 universal remote until the LED light turns on.
3. Enter the 3-digit code for your device using the number buttons on your remote. If you don't know the code, try searching for it online or contact the manufacturer of your device.
4. Release the SET button once you've entered the code.
5. Test if your remote is working by pressing some buttons like volume up/down or channel up/down.

From a previous post and an answer from our Television Expert Larry, normally not worth repairing Polaroid televisions are made in China and are not made with quality components. Wow, they are only $239 new, what quality can you expect? His advice was to replace with mainstream brands like Sony, LG or Samsung.

Polaroid P50D300FP 50 Inch SMART Full HD LED TV ...

Electrical Deals https://www.electrical-deals.co.uk > brand-new-polaroi... Full HD resolution for clarity; SMART features for extra content; Freeview Play for a variety of channels; USB Recording to never miss a moment. £239.99 You can get boards for $10 https://www.google.com/search?q=P50D300FP(A)

No Model number, '50 inch' is just a size.Can it be fixed? Yes, they can all be fixed.Is it worth it? Unlikely. Polaroid are a camera maker and don't have a good name in televisions.Hopefully our television @Larry will be along to confirm.https://www.google.com/search?q=Polaroid+TV+50%22+fault+across+bottom+of+screen%2C+transparent+band+about+2+inches+high..

You can't unless it has a 4 way directional pad with enter in the centre. https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote ..

delete the Apps reset the television reload the Apps

Search for your TV model's official app or a universal remote app that's compatible with your TV.

maybe contact them here.... https://support.polaroid.com/hc/en-us/articles/360012600640-Sound-Bars-Sound-Posts-Sound-Stations

There would not be a way to " turn it up more" chances are something is bad in the audio output circuitry, this is part of the main board, or your set may be an all in one set where there is only one board in the TV. A new board should fix the set.

If you are using the standard SNES cables with the round red, white and yellow 'Jack' plug connectors they are referred to as "Component" connections. On your remote there should be a button marked "COMP". It will probably be near the top of the remote near the Power button. This should switch the TV to the channel you need.

If your Polaroid PDX-0758 DVD player is displaying "open" even though the lid is properly closed, there are a few potential solutions you can try:

1. Check for obstructions: Make sure that there are no objects blocking the DVD tray or preventing it from closing all the way. Even small objects like dust or debris can interfere with the DVD player's operation.
2. Reset the DVD player: Try unplugging the DVD player from the power outlet and waiting a few minutes before plugging it back in. This can sometimes reset the player and clear any errors that might be causing the "open" message to appear.
3. Clean the DVD player: Use a soft, dry cloth to clean the DVD player and remove any dust or debris that might be interfering with the player's operation.
4. Try a different disc: Sometimes, a specific disc might cause the "open" message to appear. Try playing a different DVD to see if the player operates normally.

If none of these solutions work, there could be a more serious issue with the DVD player's hardware or firmware. In this case, you may need to contact Polaroid customer support or a certified repair technician for further assistance.

Try this. Take the batteries out of the remote, and use the Volume Up button on the television itself. Does that work? It is an odd fault that I have never heard of. Mind you, Polaroid are famous for cameras not televisions! https://www.fixya.com/support/r29790007-repairing_own_television ..