Cavalry Storage (CAXE3702T0) USB Hard Drive - Answered Questions & Fixed issues
After shutting down the computer a few times when
CRC or Cyclic Redundancy Check is a process that helps in identifying any errors that might occur during the data transmission process. Data is usually transmitted in small blocks, and a CRC value is assigned to each block and transmitted along with it. This CRC value is verified at the destination to ensure that it matches the CRC value transmitted from the source. A CRC error occurs when the two values (source and destination) do not match and the test fails. The main benefit of CRC is that it helps you ensure that data you have received or downloaded is not damaged or corrupt.
Causes of CRC Errors
CRC errors can occur due to many different types of problems. Some of these problems are:
- Damage to file during the transmission process.
- A problem occurred when the file was being sent.
- Problems with the device that is accessing or opening the file.
- Problems with the file itself.
Constant beeping from Cavalry external HD
Can't say exactly what it means technically speaking, but my experience with such a problem is that the drive is 'dead'. Of course trying it on another computer would be constructive.
My black calvary external hard drive won't turn on.
Would be great if the next time you also place the model number, because Cavalry makes dozens of different drives.
When the bleu light does not go on, you have to assume the drive is not getting power.
If the drive has only one cable, (small drives like 2,5 inch most of the time only have one cable) it could be the USB cable is defect and can't give through the 5 Volt coming from the computer USB connector. It also could be the 5 Volt supposed to be in the computer has gone.
If you have to connect an external power supply, with a small cable to the drive, I would check the power supply. A 5 Volt 2 A supply, with the round plug can't be that expensive.
If both don't work, it also could be inside the housing of the drive is something defect.
If you need to have the data on the drive, you always could but an universal USB connection for hard drives. I have one for IDE and E-SATA, in the box came a set power cables and a power supply, but that one was almost 50 dollar. There are cheaper ones on the net.
Be aware drives don't live forever and make sure you always have at least two backups. (that is more than one origin; and one back up)
Error message says I don't
It sounds like your network administrator has locked your ability to write to certain folders. If this is a home hard drive, the only way to fix this would be to completely reinstall windows. If it's a work computer, you need to talk to your IT Department.
CAUO37500 Lite's on but nobody
im not sure how bad your hard drive is but if it works on another computer
click start control panel administrive tools ,computer management ,device manager look through all of your devices if you see a yellow question mark?or exclamation mark ! or red x
right click to reinstall drivers or
if you can see your usb but its not working
ports(com&lpt)right click update driver
sometimes the wires inside the cable will be damaged due to bending or stretching or placing heavy equipment upon the cable,
just replace the cable of the hard disk, when you plugged the external disk drive you got that windows could recognize the USB device change the cable everything should work fine again,
check the USB leads that attach to the motherboard usually red-white-green-black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems also make sure the computers Ram and Cmos battery are securely seated
hope this helps also
you could run the chkdsk utility
click start run type cmd then type chkdsk/r/f which will scan for and attempt to repair any bad sectors and automatically fix any corrupt files on your hard drive another way of running the chkdsk utility
click start control panel administrive tools,computer management ,disk management right click on your drive select properties click tools you should see click check now click start two boxes automatically fix files and scan for and attempt recovery of bad sectors place then a tick in both boxes then select check now,start should schedule this task when restart
do not do anything while the chkdsk utility is in progress any input may damage your computer
then defragment your hard drive
also you might download and use this registry cleaner it is totally free to use
Transfer between 2 External Drives
the best program for this file transfer is Director Opus 9 this can transfer 100gig in under 1hr as with windows transfer takes 6hrs.
As I do alot of video capture and my filse range from 400mb to 4gig in size and having to transfer 700 gig about would take forever and with this program quick and easy you also can transfer over lan or wirless net.
Hi i need network and sound drivers for a Mecer z140c laptop
You can download network and sound drivers for the Mecer z140c laptop from the manufacturer's website. You can also find drivers from other sources, such as driver websites or from the laptop manufacturer's support page. Make sure you download the correct drivers for your laptop model and operating system so that the drivers work properly.
2/4/2023 5:58:32 AM •
13 hours ago
How can a white screen on a laptop be fixed?
Here are a few steps you can try to fix a white screen on a laptop:
Restart the laptop: Sometimes, simply restarting the laptop can resolve the issue.
Check the cable connections: Make sure the cable connections between the monitor and the laptop are secure and properly connected.
Update the graphics driver: Make sure the graphics driver is up-to-date. You can do this from the device manager on your laptop.
Run a virus scan: A virus or malware can cause a white screen, so running a virus scan can help determine if this is the case.
Perform a hard reset: This involves disconnecting the laptop battery and unplugging the power cord, holding the power button down for 30 seconds, then reconnecting the battery and power cord and restarting the laptop.
Boot in safe mode: Boot the laptop in safe mode and check if the white screen still occurs. If it doesn't, the issue could be with a recently installed application or driver.
Reset the laptop to its original factory settings: If none of the above steps work, resetting the laptop to its original factory settings may resolve the issue.
If these steps don't resolve the issue, it may be a hardware problem, and you should consider taking the laptop to a professional for repair.
My syncmaster 2250P is uncalibrated
You may be able to find some suitable settings for your SyncMaster 2250P monitor by searching online or consulting the manual. Alternatively, you can try using a calibration tool such as the SpyderX Pro to accurately adjust the gamma, color, and saturation of your display.
Not finding what you are looking for?