Gemini Sound Products Gemini CDM 3600 - Answered Questions & Fixed issues
How do i fix my gemin CDm 3700g so that it reads my CDs
I would go to radio shack or some electronics store and buy a can of compressed air that comes with a straw taped to the can. Plug the straw into the nozzle and open the CD drive and blow the air into it while moving it back and forth in the slot to blow as much dust as you can away from the laser head and surrounding areas. That should clean the laser head and allow it to read properly unless something is wrong with it. I would try that on any CD/DVD drive before any other steps. When they get dusty, they can't read.
4/3/2013 8:06:39 AM •
Gemini Sound...
•
Answered
on Apr 03, 2013
•
156 views
I have a Gemini CDM
You would have to get it to a service center. It could be the control or some supporting circuitry. If there is no service center near you. You can send it in to pro Line Music 215-736-8055
7/15/2011 4:57:45 PM •
Gemini Sound...
•
Answered
on Jul 15, 2011
•
266 views
No or very little sound from Fender passport
Depending on the model, there are four around that date, it could be the insert jacks are tarnished reducing the signal flow between the pre amp stage and digital power amplifier. It could be the power amplifier has failed. It could even be customer error in wiring.
This assumes there is the correct level of signal entering the input sockets of course.
12/31/2023 8:25:12 AM •
Music
•
Answered
on Dec 31, 2023
•
752 views
Breaking Roland RD 600 hammers
The Roland RD-600 is a digital piano, and its hammer action mechanism is designed to simulate the feel of an acoustic piano. The hammers in digital pianos like the RD-600 are typically made of materials like plastic or a combination of materials to replicate the weighted feel of acoustic piano keys.
The breaking of hammers in a digital piano is not a common issue, and it's not typically related to the age of the instrument alone. Several factors could contribute to the breakage of hammers, and it's essential to consider the following possibilities:
- Excessive Force: If the keys are played with excessive force or if there's any physical damage to the instrument, it could lead to the breakage of hammers.
- Material Quality: The quality of materials used in the construction of the hammers can impact their durability. If the hammers are made from subpar materials, they may be more prone to breaking.
- Manufacturing Defects: In some cases, there could be manufacturing defects that make the hammers more susceptible to breakage.
- Maintenance: Lack of proper maintenance, such as cleaning and regular inspection, may contribute to the wear and tear of components, including hammers.
If you've observed a pattern of hammers breaking with regularity, it might be worth investigating the specific cause. If it's due to excessive force or physical damage, adjusting playing habits and taking care during transport can help mitigate the issue.
As for whether it's worth purchasing new hammers from Roland, it depends on the extent of the damage and the overall condition of the instrument. If the RD-600 is in good condition otherwise and you enjoy playing it, replacing the hammers could be a reasonable option. However, you may want to assess the cost of replacement hammers compared to the overall value of the instrument, factoring in the cost of a used RD-600 and any potential future maintenance needs.
11/12/2023 2:54:05 PM •
Music
•
Answered
on Nov 12, 2023
•
420 views
Squeaky bass pedal board Roland PK5
I know this post is super old, but it was one of the first hits I had when searching this problem, so I'll post it here in the hopes that it will help someone. I found that I had to get under the cover, and clean/lube the plastic post on the assembly that pushes the button on the circuit board. It's a plastic post that slides in a plastic slot. I think it just gets contaminated with dust and that is the main cause. Philips screwdriver gets you under the cover and removes the two screws that hold that assembly together. Obviously be really careful to not break the plastic post. Looks like the wrong kind of force would snap it very easily. I used Deoxit Fader Lube, sprayed on a rag, and wiped the surfaces where the plastic parts touch. Put it back together and worked the pedal a few times, no squeak.
9/9/2023 3:16:17 PM •
Music
•
Answered
on Sep 09, 2023
•
217 views
Not finding what you are looking for?