20 Most Recent Cisco Catalyst 2960-48PST-L - Switch - 48 Ports (V09362) Category: Network Switches - Page 5 Questions & Answers

Configuration? What type of configuration / settings would you like to know? Anyhow , just use the link below and it will redirect you to the page of your Cisco Service Manual, where you can see the complete image instruction /setup / configuration of your cisco wap4410N http://www.cisco.com/c/dam/en/us/td/docs/wireless/access_point/csbap/wap4410n/administration/guide/WAP4410N_Admin_Guide.pdf I am sorry , for the answer that I provided . Since I dont have an idea for the configuration that you needed much better if your going to use the link that provided because its very helpful thanks

Cisco doesnt have any file aside from the ISO file that you can download on their website . 2 ways to download and install the driver 1 Download and install an ISO converter software and use or click the link for the driver software https://software.cisco.com/download/release.html?mdfid=283862063&softwareid=283853158&release=3.0(2h)&relind=AVAILABLE&rellifecycle=&reltype=latest and use this site to download and install the ISO converter https://www.crystalidea.com/zip-to-iso-converter-convert-zip-archives-to-iso 2. USE window update Updating the Windows Driver Perform the following steps to update the LSI MegaSR driver for Windows or to install this driver on an existing system booted from a standard IDE drive Step 1 Click Start, point to Settings, and then click Control Panel Double-click System, click the Hardware tab, and then click Device Manager. Device Manager starts. Step 2 In Device Manager, double-click SCSI and RAID Controllers, right-click the device for which you are Step 3 installing the driver, and then click Properties. On the Driver tab, click Update Driver to open the Update Device Driver wizard, and then follow the Step 4 wizard instructions to update the driver

user name cisco password cisco

What about it?

Please describe the router and the lights that are blinking. It could just be activity lights. Alternately you can look up your router and probably download the manual, which should explain what the lights are and what they indicate.

On the back of the router is a reset button. Press that in for 5-10 seconds. It will reset to factory specs. Once you reset the Valet Hotspot, all of its customized settings (network name, wireless security, etc.) will be erased and the hotspot's IP address will be reverted back to 192.168.1.1, with a default password of admin and no username.

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily. http://electro-medical.blogspot.com/

Factory reset!

press **# in the menu to enable write mode.

you have to contact your service provider

you need to install sound drivers plus all the other drivers for your device, it is almost certain they are not installed if you have a bare windows installation only

Huh? Punctuation will only help us understand what you're trying to do!

I doubt you can. Best advice is to connect any computer to the wired network open the web interface

The Cisco switch will probably err-disable the port when you plug it in. The workaround is to add these commands: Switch(config)#service unsupported-transciever Switch(config)#no errdisable detect cause gbic-invalid It'll either work or it won't!

IP Lite introduced enterprise access Layer 3 features to the Cisco WS-C2960XR-24TS-I. IP Lite is subset of IP Base features. Some of the IP Lite features are: Routing Information Protocol (RIP) v1 Routing Information Protocol (RIP) v2 Open Shortest Path First (OSPF) v2 Routed Access Open Shortest Path First (OSPF) v3 Routed Access Enhanced Interior Gateway Routing Protocol (EIGRP) stub Equal-cost routing Hot Standby Router Protocol (HSRP) Protocol Independent Multicast PIM (Sparse Mode, Dense Mode, Sparse Dense Mode, Source Specific Multicast) stub Virtual Router Redundancy Protocol (VRRP) for IPv4 Private VLAN IPv6 First Hop Security source guard Per-VLAN and per-port policershttp://www.3anetwork.com/cisco-ws-c2960xr-24ts-i-price_p1874.html

The Cisco Catalyst 2960-XR switch models have the following additional capabilities in addition to the features in the Cisco 2960-X models: Dual-FRU power supply with integrated fan Layer 3 features with IP Lite feature set Configurable 8 queues per port (standalone) 48 Ether channel groups http://www.3anetwork.com/search/2960x

call cisco