20 Most Recent Tascam BASF / EMTEC DTRS Master for DA-88 Questions & Answers

First, try formatting the Partition 03. Press MENU and select the DISK menu. Select the REFORM action and press the arrow key that points to the Right. Select the partition to be re-formatted (shown by the cursor) and press ENTER. Press ENTER to reformat the partition.

If this doesn't fix the Error message, you will need to contact Tascam Support for futher help: http://tascam.com/support/

Here is an electronic copy of your Manual: http://tascam.com/content/downloads/products/350/dp01fxcd_eng.pdf I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Officially there are no specific drivers for US-122 for windows 7. In case you have an error I suggest you to download the winXP v.3.40 from this link, unzip the files from the downloaded one, right click on the file US122_Win_3.40f.exe, choose properties, go at the compatibility tab and check compatibility with Windows XP sp3 and click apply - ok. After this install the drivers with double click on this file and check the results.

In case of a problem or clarification, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Thanks and regards
Please kindly rate this solution
Stelios
direct fixya link: http://www.fixya.com/users/technical114

The problem is thus. You have a multitrack recording saved in a format that your portastudio recognizes and you want to use it on your imac. If you can copy the file to the imac as a file, a translator, if one is available, will make it usable by the mac. You won't be able to play it and record on the imac because maintaining the recording as multitrack would require one output from the portastudio and one input on the imac for each recorded track.
Bummer dude. The kluge method would be to play/record 2 tracks at a time (or however many outputs and inputs are available) and hope for some semblance of time alignment, after which you can fine tune it and then start your editing.

Help in the link, plus maker support. https://www.google.com/search?q=KEB+COMBIVERT+F5+DRIVE+controller+not+responding+to+run+command ..

It appears to be something to do with this https://www.google.com/search?q=keb+12f5+that+shows+E.EF+external+fault 7.13.1.6 External fault With Pn.04 "Ext. fault input selection", one or more digital inputs can be programmed which can trigger the error "31: ERROR! External input" (E.EF). With Pn.03 "E.EF stopping mode" , the response of the inverter to the digital input is defined. With Pn.65/ bit 1 "2: Pn.04 = E.UP https://www.keb.su/doc/Instrukciya%20F5-A_E_H%20ver.4.0%20(ang.).pdf ..

Back in 2014 it wasn't so easy. Laptop with an HDMI port and a smart television with HDMI. ..

I have a quiet cool roof top air conditioner and am looking for parts for it.

It wants the password because you are changing parameters. https://www.manualslib.com/manual/2005049/Keb-Combivert-F5-Series.html?page=54&term=pass&selected=1#manual https://www.manualslib.com/manual/2005049/Keb-Combivert-F5-Series.html#product-COMBIVERT%2016F5%20Series