20 Most Recent Teac PLD2000 System Questions & Answers

0helpful
2answers

TEAC AG-D7900 Amplifier remote controller not funtioning

http://remotes.com/

They can be expensive but they have just about every remote you could think of.

Please don't forget to rate
12/26/2019 2:29:19 PM • Teac PLD2000... • Answered on Dec 26, 2019
0helpful
1answer
0answers
0helpful
1answer

I relocated to Brisbane ,

DVD manufacturers are only allowed by Hollywood to let their players play DVD's from the country that the unit is purchased from. To get around this some hackers have broken into the operating systems of the player and change the system so that it will play DVD's from any countries. Nor all players have these codes, and not all players of one model number will have the same code work on them.

You can try the following steps out and they might change your unit so that it will play any DVD. It's important that you know if you do try the process and it does change the player your warranty will be voided. Here are the steps:

1. "POWER ON"

2. Open DVD tray.

3. Using the remote control, press "VOLUME^" button.

4. Press the "AUDIO" button. Region Code 2 will be displayed on TV.

5. PRESS CURSOR UP/DOWN "V" button until Region Code Number on TV screen changes to "0".

6. Press "ENTER" button to store.

7. "POWER OFF" and then "POWER ON".
3/7/2011 1:14:04 AM • Teac PLD2000... • Answered on Mar 07, 2011
0helpful
1answer

My TEAC PL2000 DVD only plays some DVD's

Hello, Please get the code here : www.dvdoverseas.com/dvd.htm
www.regionfreedvd.net/

Regards, Jay__)omnjk
2/25/2011 3:12:44 PM • Teac PLD2000... • Answered on Feb 25, 2011
0helpful
1answer

I have an old Teac

I know this may sound stupid but the system is not muted, correct. I just have to ask to help in the process of elimination. There is no option inside the settings that would do this. But Make sure that the input is properly hooked up and see if it will play audio through something such as your tv. If it works on the tv but not the sound system. Then as you said the amp may be blown. but first lets test the output of the speakers. you will need a voltmeter for this and to leave the speakers plugged in but enough wire exposed to touch both positive and negative cable with the voltmeter. For a pretty close guestimate, it can be as simple as hooking a voltmeter to your speaker leads when you play your amplifier and using the formula voltage times voltage divided by impedance. For instance, if your voltmeter says 10 volts and you know your speaker to be 4 ohms then simply calculate 10 volts times 10 volts which is 100, then divide by the impedance 4.. 25watts. Please do this and let me know the outcome and we will go from there. Thanks, Midwest-tek
9/18/2010 9:55:59 AM • Teac PLD2000... • Answered on Sep 18, 2010
0helpful
1answer

Can connect a ipod to pld2000

yes you can connect it

http://www.eseelectronics.com/html/pld2000sec.html#
does the back look like this?

if so then go to ebay or any other electronics shop and buy a ipod cable

3.5mm jack >>>>>> phono jack (red, white)

with this connect the phono jacks to the audio in, in AUX 1 and select AUX 1 on the system and plug in your ipod to the 3.5mm jack and play
5/12/2010 7:55:22 PM • Teac PLD2000... • Answered on May 12, 2010
0helpful
1answer

Can connect a ipod to pld2000

Yes you can, but as far as I know, you can only play audio through the system. All you will need to do is purchase this http://www.radioshack.com/product/index.jsp?productId=3240426 Enjoy!!
3/17/2010 10:40:03 PM • Teac PLD2000... • Answered on Mar 17, 2010
0helpful
1answer

How do I extract a cd from pld2000 with a dead

if you remove the lid there will be a small motor at the rear of the unit with white or black cogs, if you turn these manually it will realease the tray and you can then slide it out
2/28/2010 6:38:54 PM • Teac PLD2000... • Answered on Feb 28, 2010
0helpful
1answer

Panasonic over head projector

what projector? the heading just says panasonic and the picture of a teac surround system. need more info!
8/19/2009 12:59:22 PM • Teac PLD2000... • Answered on Aug 19, 2009
0helpful
1answer

Lost remote control

check your manuel for a phone for your stero system, call them if no manuel go on line google remote controll go from there thats how i got lucky.
7/26/2009 12:33:36 PM • Teac PLD2000... • Answered on Jul 26, 2009
0helpful
1answer

Playing a movie, the movie freezes intermittently throughout the entire movie.

Two things may be at work here...

If the pauses are the same each time then the player is possibly just switching data layers or chapters on the disc and needs a moment to seek, focus and re-synchronize. Different players may handle it differently. Both of mine pause like that for as long as 2 seconds.

If it's random and you see digital artifacts (squares, bars, frozen motion on parts of the image), the player is having some kind of problem reading the data and error concealment has failed so it needs to retry or think about it some more.

I have worked on a lot of technology in my time and whenever any external, human-handled media is involved I would alway start there. Is the disc PRISTENE? Though the standard for DVD is very robust it is not actually magic. Those bits are s-m-a-l-l so anything visible to the naked eye will be gargantuan at the scale this hardware operates in. Clean with a dry, soft, lint-free cloth wiping in radial motions, center to edge, because the data is written like an LP record in circular tracks. If you happen to make a small scratch it will be across tracks instead of parallel to them so the error correction circuitry (magic) can probably deal with it better. A bit of mild glass cleaner on the cloth to just moisten it works well. You should treat any digital medium as if it were your own high-priced eyeglasses.

If it's infrequent, I wouldn't worry too much about it. Do you want to risk damaging the machine for the sake of a few glitches? That is up to you. I'd stay out of it myself.

4/21/2009 6:17:46 PM • Teac PLD2000... • Answered on Apr 21, 2009
0helpful
1answer

No signal to the television set

Make sure that the DVD player's output is properly connected to the proper input on the TV, (Video1, etc.).
2/14/2009 4:09:38 PM • Teac PLD2000... • Answered on Feb 14, 2009
0helpful
1answer

Sound but not picture, a black screen

Hi gp63

you will need to change the settings of the tv to ensure that it is on the right mode. ie. av1, av2, dvd, what ever the settings you have used for your tv.

good luck

smeags.
12/29/2008 9:02:43 AM • Teac PLD2000... • Answered on Dec 29, 2008
0helpful
1answer

Unlock region code on Teac PL-D2100

TO UNLOCK THE REGION CODE ON THE PLD 2100 DO THE FOLLOWING:

  1. "POWER ON"
  2. OPEN THE DVD TRAY
  3. USING THE REMOTE CONTROL, PRESS AND HOLD "RETURN" BUTTON AND PRESS "CURSOR DOWN" "V" BUTTON.
  4. RELEASE "RETURN" BUTTON AND PRESS THE NUMBERS " 2 ; 3 ; 7 ; 9 ; 2 ; 2 ; 2 " IN SEQUENCE.
  5. PRESS CURSOR DOWN "V" BUTTON UNTIL "MAINTENANCE MODE" NUMBER ON TV SCREEN CHANGES TO "0"
  6. PRESS "ENTER" BUTTON TO STORE.
  7. "POWER OFF" THEN "POWER ON"
DVD Player is now REGION CODE FREE..........Enjoy the movie!
11/3/2008 7:35:13 AM • Teac PLD2000... • Answered on Nov 03, 2008
Not finding what you are looking for?
Teac PLD2000 System Logo

Popular Tags

52 questions posted

Ask a Question

Usually answered in minutes!

Top Teac Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5720 Answers

 Francisco Mauricio...
Francisco Mauricio...

Level 3 Expert

1551 Answers

The Knight
The Knight

Level 3 Expert

76835 Answers

Are you a Teac Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Teac Audio Players & Recorders

  • Teac Audio Players & Recorders

Most Popular Question

extract cd from pld2000 dead

  • Audio Players & Recorders
Loading...