Planet Audio P9685B / RDSP9685 Car Video Player - Answered Questions & Fixed issues

Looks like not available. If it was, it would be on this link https://www.google.com/search?q=planet+audio+vx2200d+amplifier+manual ..

Connect an HDMI cable to the HDMI ports labeled ARC or the port identified in your manual that supports ARC. On your TV menu, set Speakers to Audio system. Note: This is an example of how to change this setting on an Android TV™: On the remote control, press the HOME button. https://www.sony.com/electronics/support/articles/00007061

Check to make sure that the "remote turn on" lead is intact. They are usually blue wires.This wire provided a turn on voltage to fire up the amp once the head unit is turned on.

http://www.fixya.com/support/p9831280-planet_audio_ac4000_1d_4000_watts_max_po/solutions https://www.manualslib.com/products/Planet-Audio-Ac4000-1d-3962662.html

Stop messing with it and return it for a new one that works, or return to man. under warranty. You cannot fix it.

Kegan... I tried and tried to find schematics and/or a troubleshooting guide with no luck! Sorry about that... IF you can open it up, see if you find fried or destroyed parts? Look CAREFULLY for a blown fuse but know they come in MANY configurations now! IF POSSIBLE, inspect the printed circuit board for any BURNT or open foil paths? If all else fails ~ send it back to the factory for repairs. You should also receive the latest UPGRADES too and hopefully at least a 30 day warranty?

Please be more specific.

I would recommend contacting Planet Audio Directly: 1-888-990-1236

Test the speaker out signal with a regular speaker

One of your speaker wires could be faulty

no it has to be the same model face plate so it can insert correctly.

best thing i can advize you is take the cd player to maplins or halfords tell them what car you have got and they will give you the right leads to join on to the manufactures leads so it is just a matter of pins in pull radio out that you wish to change connect universal leads to loom push cd player back in without jamming wires and away you go also ebay is pretty reasonble on audio leads if you know which 1 u want hope info is usefull

I was in the same situation you were and I found out that the amplifier was a goner because we replaced it with a new and bigger amplifier.

It would be much easier to simply heat up the solder connections and get them to make contact if possible. A picture of the problem would really be a huge help. Many people have these types of amps and you might find some one that will sell you the parts you need but without a picture it's hard to say if they will be exact matches.

The sound issue could be due to the offset not being set correctly there should be an option for that on the stereo functions. Depending on the units capability's from a format stand point that could be the issue, check and see what type of files are on the card. Then see what kind your receiver accepts, then if they do accept them find another way to make sure the Sd card is viewable. The slot may be damaged.

Follow this link and you will find some planet audio wireless headphones. Good luck!

http://www.google.com/search?q=planet+audio+wireless+headphones&hl=en&prmd=ivns&source=univ&tbs=shop:1&tbo=u&sa=X&ei=JsKZTZvhJMfNtwfm7byHDA&ved=0CDMQrQQ

Here are your specs. RMS 900 Watts Nominal and Max 1300 on 2 Channel @ 2 Ohms.
4 Gauge should do fine but if you like to feed the beast go with 2 gauge.
Looks like going rate is $110 on Amazon or elsewhere.
If it attains the RMS wattage it would be a good amp. I like monoblocks but
you will pay more. I looked into Tri-Mode and it is straight forward but people
are having problems figuring it out. With your 2 speaker operation you should
avoid the issues others are having.
Good luck and remember, rearview mirrors were meant to fall off!
Mine: JL 1800A monoblock into 2-JL 12" W3's in series for low bass 20-80 Hz; Lanzar Vibe 266 bridged into 2-12" Memphis in series for mid bass 40-200m Hz. 2 guage wire to mononblock-250 amp fused at battery, 4 guage to Vibe w/250 amp at battery.

Anarchy Series 2-Channel Car Amplifier

• RMS Power Rating:
  • 2 ohms: 900 watts x 2 chan.
  • Bridged, 4 ohms: 1800 watts x 1 chan.
• Max power output:
  • 2 ohms: 1300 watts x 2 chan.
• Total Power Output: 2600 watts
• Pulse width modulated MOSFET power supply
• Convenient remote subwoofer control
• LED power (green) and protect (red) indicators
• Variable Bass Boost 0 to +18 dB
• Bridgeable Tri-mode operations
• Chrome-plated connections enhance durability
• Variable high and low pass crossovers
• Illuminated logo
• 3-Way System Protection circuitry (thermal, overload, and speaker short protection)
• Dual speaker terminals simplify the hookup of multiple speakers
• Heavy duty aluminum alloy heatsink for extreme heat dissipation
• Low level high inputs
• Heavy-duty set-screw terminals
• Input sensitivity:
  • Low level: 100mV-2V
  • High level: 2V-8V
• Variable high-pass filter (45-90 Hz, 24 dB/octave)
• Variable low-pass filter (50-500 Hz, 24 dB/octave)
• Damping factor: >125
• Signal-to-Noise Ratio: 102 dB
• Frequency response: 20-20,000 Hz
• Dimensions: 15-9/16"L x 10"W x 2-3/16"H
• 1/0-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
• 1-year Manufacturer's warranty

If you can drop the name and model of the device, i would help you get a direct link to the manual.

try wiring your subs to the amp at L + and R -

Unfortunately, P/A does not release schematics - even to repair techs. You have to find a knowledgeable repairman, or ship it to P/A.

1-888-990-1236 for support, and RA# info.

Plan to be without your amplifier, as NEW WARRANTY repairs are backlogged approx. 6 mo.

Rule out external problems by hooking it up to an isolated bench power supply.

If planning on doing your own repairs, see this site for info.


P/A has an ONLINE SUPPORT WEBSITE to order parts etc, and may be a useful resource as well. Do some fishing, and you may find what you're looking for.

I will too, and post any findings.