Top 20 Jensen Vm9214 Car Video Player Questions & Answers

Check your wires, theres a wire for the reverse if your going to use a back up camera, if not do not connect it, you may have had it connected through a speaker wire, if so then thats your issue and once you wire it up right it wont do that any more, had the same issue and thats what fixed it hope this helps

Did you connect the power, ground and accessory? When doing a bench test for operation, these wires need to be connected.

go to jensen online they should have the part you are looking for take the old one out and go buy the pics on the site count the wires and plug pins and try to match the colors cause sometimes they will change good luck

On the main remote press stop twice, then 1, 2, 6, 4. This will get you to the hidden menu which will allow you to bypass the parking brake having to be on. It will also give you an option to play burnt movies:)

The touch screen in most cases will need to be replaced because it developes a short in the membrane making it inoperative. Since you have a remote and you have full access I recommend using it the way it is. However if you wish to track down the part, ebay is a good source for parts and may have what you are looking for.

hi there
the problem you are probably inquiring is a dirty cd dvd lens this is a simple fix go to local electronics or walmart store and ask for a cd lens cleaning cd this will usually fix the problem and is fairly inexpensive that should take care of your issue
thank you any other questions feel free to post

same problem. figure it out?

Check and make sure the battery is installed in the remote. If it is installed, check for the correct installation. If this is correct, replace the battery. If it still doesn't work, you might have a faulty remote. I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Hi timkilian,

If your iPod won't play, it might caused by some setting on your Jensen vm9214. Also please ensure that your iPod has the latest Apple firmware to avoid any connectivity issue. Please visit this link for additional information on how to operate the iPod on the Jensen VM9214.

Hope it helps.

Thank you for using FixYa.

The red light is associated with the memory (constant 12 volt power). You also need switched 12 volt power (power with key turned to accessory)for the unit to turn on. If you installed the system yourself, you are looking for 12 volts on the red wire of the Jensen unit. If power exists at the unit, check the fuse of the unit and the fuse of the vehcile.

You need the Jenson BTM15 (bluetooth module) and the Jensen NAV105 (gps) in order to have navigation and bluetooth connectivity thru this head unit.

http://www.mobile.jensen.com/accessories/?sku=NAV102

http://mobile.jensen.com/bluetoothcarkits/?sku=BTM15

These units sell for around $50 (btm15) and $200 (nav102) on amazon.com

Check the power and ground wires going to the head unit. I have seen this problem before, and in those cases it was due to the battery not supplying enough power and the power wire being too small. Try using 6-8 gauge wire for the power and ground. I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Do the Screen Calibration. https://www.google.com/search?q=Jensen+9022+touch+screen+is+out+of+alignment ..

Try Jensen support for that detail. https://jensenmobile.com/support/ https://jensenmobile.com/shop/multimedia/cr271ml/

It sounds like there may be an issue with the mechanical components of the DVD player, specifically with the tray. Here are some troubleshooting steps you can try:

1. Check to see if the emergency eject feature is working. There should be a small hole on the front of the DVD player, and you can use a paperclip or a similarly sized object to push the button inside. This should manually eject the tray.
2. Make sure that the DVD player is receiving power. Double-check all of the connections and fuses.
3. Reset the DVD player by disconnecting the power for a few minutes, then reconnecting it and trying again.
4. If none of the above steps work, it may be necessary to take the DVD player apart and check the mechanical components for damage or wear. However, this is not recommended unless you have experience with electronics repair.

If none of these steps resolve the issue, you may need to seek the assistance of a professional electronics repair technician.

This video may help you https://www.youtube.com/watch?v=VC89DgWJlYw

1200 Watts at 12volts is 100 Amps. At least 16mm on a short run.

Your Jenson model as written only appears here on Fixya in your question. The Jenson modelling numbers don't follow what you wrote so your model number 'EOA 7P' is not valid. https://www.google.com/search?q=jensen+eoa+7p ..

hair dryer if just moisture if water [failed seal or damaged cover ] and need to unscrew ans pry apart --but if water most likely electric circuit damage

No, you cannot use a 270 watt amp kit on a 1000 watt amp. The wattage of the amp kit must be equal to or higher than the wattage of the amp it is being used for.