20 Most Recent Nikon EN-EL1 Battery + Charger (COMBO2C0069) for Nikon 4800 5000 880 885 995 - Page 6 Questions & Answers

The only thing you can do is send back to Nikon for repair, that is expensive.

Here is a video on auto focus. https://www.youtube.com/watch?v=gEDzAMm1FCc

Be more specific please!

Look for it at this web site http://www.manualsonline.com/

Maybe it's the charger connection.

Did you format the card in that camera? Is there a lock switch on the card?

that is a common problem, take the camera to a professional service for a calibration

replace LCD screen

This manual from Nikon for your camera should help: http://download.nikonimglib.com/archive2/oNoCa00m4sZ302KxYqP19oXRlV67/AW130RM_(En)04.pdf

The parts are small, there are parts that store electricity and may shock you, there may be soldering required.

camera doesn't support 64gb, try 32gb or lesser

Try removing battery fully charge then restart camera after 10 min. on the SD card try reformatting and or try other card and ket me know the outcome.

If you're in manual mode, you have to press the (+/-) button and then rotate the command dial at the same time. This will allow you to lower or raise the aperture f-number.

Hi Check for any dust or dirt that could be stuck around any of the buttons on the camera. If the camera is under the impression another button is being pressed (because of dust dirt) then the OK button will not work. If you cannot find any button that seems to be jammed then it maybe the sensor behind the OK button has failed. We hope the suggestions helps to get the camera running again

Hi To reset the camera to the default settings you must go into the menu and choose "Reset All" We hope this helps

The battery may be bad.

Depends on whether it is fitted with the appropriate mount.

This is a problem with many different manufacturer cameras, including Nikon. I simply don't do anything unless the blade that does not retract is interfering with a proper photograph, in which case I just open it manually with slight finger pressure. Many Canon point and shoots have legendary leaf problems, and a little pressure opens them quickly. Don't try to repair it. That's when people get into trouble. Some people suggest blowing air but most people use a spray like Dustoff which has oil in it, so I don't recommend that. If you have a quality bulb-type air blower, they are very effective. What works best for me however is a vacuum cleaner and the little attachment that is for getting between shade slats.

Likely not enough light to autofocus. Try manual focus to confirm. Can also indicate insufficient battery.