20 Most Recent Wolf Range WKGD-2 Gas Double Oven - Page 8 Questions & Answers


The oven is probably in auto mode, reprogram the timer for manual operation normaly symbolised by a image of a hand

Ovens | Answered on Sep 15, 2020


other than checking the door seal itself, make sure its intact and door closes properly. make sure door' doesnt spring back open after closing does the opening along sid look to be even all the way up the side. maybe the oven door opens more than 90 degrees?? if it does id look into replacing the door hinges

Ovens | Answered on Sep 03, 2020


F5 error code relates to a outdoor fan speed malfunctioning. This can be caused by a faulty outdoor mother board or a defective outdoor fan motor

Ovens | Answered on Aug 30, 2020


Unfortunately, the F76 code means that the control panel/keypad could be faulty for some GE-manufactured ovens. Since the keypad and control board are sold as a single unit, it's not the cheapest fix. Try disconnecting the power to the oven (unplug or trip the circuit breaker) for at least a minute. Sometimes a longer period (5 minutes+) without power helps reset the error code. If the error returns, please add a comment with the model number of the oven. I may be able to find a parts list for you.

I hope this helps.

Cindy Wells

Ovens | Answered on Aug 23, 2020


Hi, you have to switch off the machine for some minutes. After restarting push the "SET" and "OK" together and you will get the service menu, where you have to change "EUR" to "EURN".
If the service menu doesn't activated you have to remove the calbe of display from control unit for some minutes and restart again.

Ovens | Answered on Aug 19, 2020


Did you ever find your parts? I have the same need today (8/17/29). [email protected] Todd

Ovens | Answered on Aug 17, 2020


After a power surge or a power outage that resulted in a surge, voltage spike or transient there is almost always going to be damage to electronic circuitry somewhere in the household, especially to electronics using highly sensitive cmos computer chips, especially when additional surge protection hasn't been provided.

These days such computer chips are found in just about every tv, radio, washing machine, fridge, microwave oven - in fact in a modern household there is hardly any appliance or device that doesn't contain such electronics. A surge or spike in the supply often damages circuitry but doesn't immediately render it useless but weakens the components so early failure is likely but not so soon the power surge is fresh in the memory...

There might be an internal fuse that has failed or the fault might be more serious but only removing covers and checking the circuit with a multimeter will reveal the fault.

Ovens | Answered on Aug 09, 2020


please download your exact ariston c 34s G1 x ex model user manual as under:

http://www.downloadbooklets.com/booklets/searchBooklet.do;jsessionid=D853DE5228C47CD663A9DB6F6CA04067

Ovens | Answered on Aug 03, 2020


if you are using the correct globe ( not one from a hard ware shop but one from the dealer ) the blowing is a result of arcing in the socket
get in an electrician to fix the fault

Ovens | Answered on Jul 31, 2020


Hmm, this is harder to find than a snowflake in summer. It is not on the internet. That said, here is the webpage of someone who actually owned one of these 1970's ovens and MIGHT have access to a cookbook. I think these were sold in South Africa.

https://romysommer.blogspot.com/

However, this is a convection oven and so the following might be of help: https://www.amazon.com/Cooking-Convection-Everything-Need-Know/dp/0767915313

Ovens | Answered on Jul 23, 2020


The problem if related to the power outage might be due to a surge that damaged the electronics. In most cases pressing the cancel button is supposed to reset the alarm. If you could post the model number it would help.

Ovens | Answered on Jul 22, 2020


The timer electric fan has inside a power regulator, a TRIAC (double SCR) in series with a potentiometer. You regulate the power with the axis of the potentiometer. When the axis is wet you get an electrical shock when you touch the potentiometer. Replace the power regulator please.

Ovens | Answered on Jul 10, 2020


I have the same problem with a Kenmore oven. Looks like the oven walls have bent outward.

Ovens | Answered on Jul 01, 2020


Look for an online appliance parts store. there are several and usually quiet helpful.

Ovens | Answered on Jun 29, 2020

Tip

Info on Parmco 5-function OV-1-6W-5 oven switch selectors ZX-851 and XPO33301060


I've written up my experience changing the Parmco 5-function oven switch selector here in case it helps anyone:

https://docs.google.com/document/d/1_arC4El5_N91pLyrchf9pklpGxjXje4i7KbCFzOqv0U

on Jun 25, 2020 | Ovens


Unknown if this link will help you fix it.

https://www.boilerguide.co.uk/manufacturers/ferroli/error-codes

Quoting from link: F34 Supply voltage under 170V - electric mains error

Ovens | Answered on Jun 22, 2020


Either the new element is a dud or power isn't reaching it and that is simple to test with your handy multimeter.

If power is reaching the element it is a dud and if it isn't, there is a problem further back in the circuit.

When an element fails it isn't unusual for it to cause a power surge; an almost short circuit with the ground and while the big old fashioned mechanical switches would cope, modern electronic switching might not.

Ovens | Answered on Jun 21, 2020


If you can see the Comment menu choice, please add the manufacturer and model to your question, or if necessary, post another question.

Example of result of searching the internet using https://www.google.com

https://www.mdappliancellc.net/2018/08/28/ge-slide-in-gas-ranges-oven-shut-down/

Ovens | Answered on Jun 12, 2020


You will need someone to open and replace faulty part or parts, and since this is an online only site, even the purchase of replacement parts will be an issue for you. I am sorry to inform you, but it will be likely that you need to purchase a new oven if you haven't found someone to repair it.

FIXYA tends to be for do it yourself repairs and questions, and when I searched the internet for information I only saw the following video showing a technician unscrewing parts, but really not providing enough help to assist you. Unfortunately, you will be faced with paying a repair technician or purchasing a new oven.

Video: https://appliances.wonderhowto.com/how-to/replace-fan-oven-element-belling-cooker-261386/

Ovens | Answered on Jun 12, 2020

Not finding what you are looking for?
Wolf Range WKGD-2 Gas Double Oven Logo

32 questions posted

Ask a Question

Usually answered in minutes!

Top Wolf Range Ovens Experts

Harjeet s. bola
Harjeet s. bola

Level 2 Expert

49 Answers

ray gallant

Level 3 Expert

71004 Answers

jenifer ronan
jenifer ronan

Level 1 Expert

11 Answers

Are you a Wolf Range Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Wolf Range Ovens

  • Wolf Range Ovens

Most Popular Question

clean wolf gas oven use

  • Ovens
Loading...