20 Most Recent Wolf Range WKGD-2 Gas Double Oven - Page 6 Questions & Answers

1 Answer

How do I obtain and fit a door seal for a Diplomat ADP4500 oven

ASK GOOGLE

Ovens | Answered on Nov 26, 2020

2 Answers

I have just bought a morphy Richard's mini oven. Is the element supposed to glow red when using the grill. Mine doesn't and didn't seem to be cooking very well so I had to resort t using the hob to finish cooking liver and onions

WHY DON'T YOU ASK A LOCAL REPAIR SHOP

Ovens | Answered on Nov 25, 2020

1 Answer

Why the gap in the oven front? Why the nasty odor when in use?

You didn't say whether gas or electric...

A gas oven needs to be vented and combustion gases usually rise through a vent above the flames. The door is usually a reasonably good fit but there is no requirement for it to fit and seal like an electric oven. The bad smell could be a spillage on the burner or perhaps it just isn't burning efficiently - the flames should be blue without any hint of yellow.

The door of an electric oven should have a seal and should be close fitting with no discernable gap to complete the closed insulated box that is the electric oven.
If there is no spillage inside, the odour is probably caused by the insulation being contaminated with something as it was being manufactured, also possible with the gas oven...

Ovens | Answered on Nov 25, 2020

2 Answers

What would cause the stovetop hubs of a new De'Longhi DEFL605E 60cm electric freestanding oven to not work?

Is it just one burner not working or none of the stovetop burners working ??

Ovens | Answered on Nov 25, 2020

1 Answer

How can I keep my oven rack from tilting forward when I pull my rack out and causing my food to slide off? there is a lip at front of rack that causes it to lean if pulled too far forward. Any advice?

The oven rack may have been installed backwards.

Ovens | Answered on Nov 24, 2020

1 Answer

Westinghouse Silhouette. How can I remove door?

Videos

https://www.google.com/search?q=Westinghouse+Silhouette.+How+can+I+remove+door

..

Ovens | Answered on Nov 23, 2020

1 Answer

My stove has no power at all (elements or oven will not work) Model # 316458466 Not sure what’s wrong it or how to fix it? Any ideas?

check power to stove --breaker /wiring if good need to check and test control panel for damage

Ovens | Answered on Nov 23, 2020

1 Answer

Cuisinart CSO-300NC steam and convection oven. Why did the convection bake stop working?

Your steam reservoir may be out of water.

Ovens | Answered on Nov 22, 2020

1 Answer

I’m trying to replace the heating element on my Kenwood oven but it looks like it’s permanently fixed to the back by rivets. How do I get it out?

drill out the rivets if thats what they are. use new ones when installing new element. have you tried popping those clips to see if it will just come out?

Ovens | Answered on Nov 21, 2020

1 Answer

Westinghouse 688 wall oven. How can I replace the oven light?

GET A GOOD FLASHLIGHT AND LOOK IT OVER.

Ovens | Answered on Nov 21, 2020

1 Answer

My defy slimline oven 600U top element is not turning red like the bottom one what might be the problem?

Defective element

Ovens | Answered on Nov 19, 2020

1 Answer

I have a Lamona 3200 electric oven and am finding it overcooks food quite often. I have been using the conventional oven temperatures on recipes, but am wondering whether this is in fact a fan oven? Can anyone confirm whether this oven is a fan oven rather than a conventional oven? Or is there an easy way to check?

if you see a fan in the back it possibly is .

Ovens | Answered on Nov 17, 2020

1 Answer

Jenn-Air model WW27430P. After heating to set temperature and baking for 8 to 10 minutes, why does it shut off?

It's faulty and in some sort of self protect mode. You need a service call or you can try some of the fixes here.

FIXED - WW2780 Jenn-air oven keeps shutting off ...

www.applianceblog.com > mainforums > threads > ww...

Feb 15, 2012 - Hi.... I have a Jenn-air oven model WW2780 that keeps shutting off after being turned on, almost always during the preheat. From what I have ... Missing: WW27430P ‎' Must include: WW27430P

Jenn Air Range Stove Oven - Oven Won't Turn Off - Repair ...

www.repairclinic.com > RepairHelp > Jenn-Air-Oven-...

Here are the most common reasons your Jenn Air oven won't turn off - and the ... Enter model number to search for the required part specific to your product.

HOW-TO: Jenn-Air Oven WW27430P Door won't close

www.appliancepartspros.com > repair-help > ww27430...

Door won't close is the most common symptom for Jenn-Air WW27430P. ... I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom ... Door pulls shut and li8ght stays off.

HOW-TO: Jenn-Air Oven WW27430P Won't start or doesn't start

www.appliancepartspros.com > repair-help > ww27430...

How to Replace Oven Temperature Sensor Kit for Jenn-Air WW27430P Won't start # ... Jenn Air stove JDS9860CDB00 error code 1d11 oven not shutting off. ... Very easy on this and other models with this sensor-- just two screws holding it in ... Rating: 5 · ‎123 reviews

..

Ovens | Answered on Nov 17, 2020

1 Answer

Admiral Clean-O-Matic. Why does it keep blowing the 30amp glass fuses for the oven when I turn the dial to a temperature setting to heat up the oven to bake broil or keep something warm?

possible shorted heating element also called ignitor

Ovens | Answered on Nov 16, 2020

1 Answer

VGSO166 Oven; how do you check thermostat

https://www.manualslib.com/manual/1241242/Viking-Vgso166.html

Ovens | Answered on Nov 14, 2020

1 Answer

My oven WOS51ec0as03 displays an error F1E1. Paid 2 techs come out. 1 says its the main control board W10839510 and the other claims there are two control board and its the other one. which is it?

I don't know but it is unlikely I would think that an oven would have two control boards, perhaps there is one board for the oven and another for the hobs, if it is a cooker rather than just an oven.

Unlikely too I think that anyone would contact a repairer and ask him to discover what is wrong - more likely a person would ask a repairer to come and fix it and then if they don't fix it there would be no charge or perhaps only a nominal call out charge.
Local repairers are competing against the field engineers of the large corporates and so tend to make charges based on their success or lack of...

Ovens | Answered on Nov 13, 2020

1 Answer