Top 20
Zenith C27A24T 27" TV Questions & Answers
Old zenith TV shuts off model c27a24t
Check the LOT (Line Output Transformer) too for damage. Replace the horizontal scan output transistor. Check the input voltage to LOT. If the voltage is absent check the feeder resistor; if any. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
Type in this key phrase
" my service table today " in the search box at the top right of the display window, to get gathered some pages which has the details of practical experiences to the author of that site.
Because I like this zenith 27 inch TV large black TV
im sorry I cannot deliver any thing. I was just helping fix things that was broke and saving people money because most things can be fixed at home very cheap instead of paying 300 dollars for a repair on a 2 dollar part. sorry if I could I would for sure.
Thomson tv 28dg17ev no power
Check and replace damaged component/s at it main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Viewing it in "
Mosaic" or "
Magazine" will make surf easy. Surf the site with patience. Pull up older posts.
Do asearch by type in the brand name of your device at its search box.
http://electronicshelponline.blogspot.com/
Hello, I have a Zenith Concierge model number
Codes to check with Zenith brand TVs are: 0287,0281,0288,0285.
Try these codes. If
you wish to get more details, check the sites linked here. Setup code list, and setup procedure to many
popular brand remote controls are given.
http://electrohelponline.blogspot.com/ http://remotesearch.blogspot.com/ Selecting the view option, either to
Mosaic
/ Flip card, can be selected by the
drop-down list, by the top left
of the display window, will make surf easy In case of service manual, I've it with me, but cannot upload it by this window as it is in PDF. In case of service manual, I've it with my system library, but cannot upload here by this window, as it is in PDF.
google.com/+GopakumarGopalan
I have a Vizio M550VSE 47in, and the RF Connector
It is a semi-skilled work. You might have to desolder out it tuner from the circuit board to make it repair. RF socket is the part of that tuner. If will be best to contact any service technician.
Zenith sg2706h will not power on. Checked 4a fuse
HiPlease give more details: are the standby light on or not? If the fuse is OK, I assume the standby light is on. In this case the pull up circuit may be faulty and you can confirm trying to call a channel from the remote controll and see if the light blinks. Generally is a faulty transistor in the pullup circuit but a TV schematic is required.Sully
TV sparks then shuts off, whats the problem?
Check the EHT boot cap for damage. Contact any experienced service technician. Extra High Tension arcing is going on inside. Do not turn ON this TV, until the fault has been rectified. It might make more parts to get damaged.
Not finding what you are looking for?