20 Most Recent Brother DCP-8020 Laser Printer - Page 9 Questions & Answers


Check the ink level
Start with checking the ink level in your toner. ... Since you have a problem with printing in Yellow color check Yellow or Magenta ink level. If its ink level doesn't appear, it could be an issue with either Yellow or Magenta cartridges. Two fix the issue, you can try to perform Clean Printhead.
https://windowsreport.com/printer-wont-print-yellow/

Brother Office... | Answered on Apr 04, 2020


To turn off the sleep mode of your brother machine, at first, you need to press the "Start" and "Options" keys at the same time. When the LCDs the message saying "Sleep Mode: On", press the "Up" or "Down" arrow keys to turn it off. In the end, press the "OK" button followed by Stop/Exit.
https://www.brother-support.us/how-to-wake-up-brother-printer-from-deep-sleep/

Brother Office... | Answered on Apr 03, 2020


https://qqpokeronline.me/agen-judi-ceme-online-freechip/

Brother Office... | Answered on Apr 02, 2020


This error occurs when a piece of paper or paper clip gets stuck in the printer.
...
Perform the Troubleshooting Steps to Fix the Brother Printer Error Code 35
  1. From your device cancel all the printing commands that are in the queue.
  2. Open the print head carefully by using the finger holds on both the sides of the machine.
https://www.hprintertechs.com/brother-printer-error-code-35
https://www.youtube.com/watch?v=hy3eymxYp6I
https://www.pcasta.com/printer/fix-brother-printer-error-state/

Brother Office... | Answered on Apr 01, 2020


Unknown error - why post it here?

Manufacturer web site shows some possible errors, but unsure what your purpose is:

https://support.brother.com/g/b/faqlist.aspx?c=us_ot&lang=en&prod=hl2240_us_eu&ftype3=1965

Brother Office... | Answered on Mar 31, 2020


Brother printer error 4F may occur in your brother printer. ... When the ink level in the ink cartridges becomes low, your brother printer shows you the signal, and then if you are still not replacing the cartridge, then the printhead has to suffer from overhead and burn out.
https://www.dialprintersupport.com/blog/how-the-brother-printer-error-4f-can-be-removed/

Brother Office... | Answered on Mar 30, 2020


At the point when you attempt to print something from your machine & https://brotherprinteruk.com/brother-printer-prints-blank-pages/ or moderately blank pages as a result of hard copy, that means your brother printer is facing hardware problems not the software problem.

Brother Office... | Answered on Mar 28, 2020


CASE B: Print from the Paper Tray (Tray 1).
  1. On the machine's control panel, press and hold Go or. (Power On/Off) for about two seconds to cancel the current print job.
  2. Make sure the paper is not set to the manual feed slot.
  3. Check the Paper Source setting in the printer driver. (Windows) ...
  4. Try to print again.
https://support.brother.com/g/b/faqend.aspx?c=us_ot&lang=en&prod=hll2370dw_us&faqid=faq00002216_007

Brother Office... | Answered on Mar 27, 2020


Go to 'Control Panel' from the start menu and the find the 'Hardware and Sound' option. Click on it and then navigate to the 'Device Manager' option. Here, you will be able to see the printers available on your PC. Now, you should right-click the printer and then click on the 'Update driver' option.
http://howtofixmyprinter.com/printer-issues/how-to-fix-the-printer-driver-is-unavailable-error-on-windows-10/

Brother Office... | Answered on Mar 26, 2020


change ink cartridges and test print and clean heads

Brother Office... | Answered on Mar 26, 2020


Follow the steps below to resolve the issue.
  1. Step 1: Check the network connection. ...
  2. Step 2: Check the network scan settings. ...
  3. Step 3: Check the scanning feature works. ...
  4. Step 4: Check the firewall settings. ...
  5. Step 5: Make sure your router allows communication on the network via Bonjour.
https://support.brother.com/g/b/faqend.aspx?c=hk&lang=en&prod=dcp9010cn_eu_as&faqid=faq00002637_015

Brother Office... | Answered on Mar 25, 2020


https://help.brother-usa.com/app/answers/detail/a_id/154784/~/error-message-a-malfunction-occured.-turn-the-machine-off%2C-then-on-again

Brother Office... | Answered on Mar 25, 2020


Brother MFC-L2700DW Printer wireless setup
Turn on the printer and press Menu in the control panel to link your MFC-L2700DW Brother printer to a wireless network. Use the arrow key up or down, pick the option Network, and click OK. Open the choice for WLAN and press OK. Select Assistant Setup, and activate WLAN.

https://www.brotherprintersupport247.com/blog/connect-brother-mfc-l2700dw-printer-to-wifi/

Brother Office... | Answered on Mar 23, 2020


1. Print the Network Configuration or User Settings List on the brother machine and obtain the IP Address. ... On the Mac, open HDD => Applications => Utilities => Network Utility. Click the PING button at the top of the window and enter the brother machine's IP address in the appropriate section.


Brother Office... | Answered on Mar 20, 2020


Make sure that the printer is on and open the front cover. Remove the toner cartridge and drum unit from the machine.
...
Once the new drum is replaced, you will need to reset the drum counter:
  1. Open the front cover.
  2. Press and hold OK for 2 seconds.
  3. Press the Up arrow key or 1 to reset the drum counter.
https://support.ldproducts.com/hc/en-us/articles/115004663787-How-do-I-fix-a-replace-drum-message-on-my-Brother-laser-printer-

Brother Office... | Answered on Mar 20, 2020


If "PRINTING" is frozen on the display of your Brother machine, follow the instructions listed below:
  1. Unplug the Brother unit from the power outlet.
  2. Press and hold the Stop/Exit key. As you hold this key, plug the power cord back into the power outlet.
  3. Continue to hold the Stop/Exit key for 5 seconds. The display should return to the date and time.
  4. If the display does not return to the date and time, repeat steps 1 through 3.
If the LCD continues to display "PRINTING", please contact Brother Customer Service. This information comes from the Brother website.

Brother Office... | Answered on Mar 19, 2020


1. Do not connect the printer with a USB cable at this point.
2. Go to the Brother website and download the driver for the printer.
3. Power up the printer.
4. Open the printer driver, select Brother Peer to Peer Network.
5. Connect the USB cable between computer and printer.
6. Allow adjustments for firewall and anti-virus.
7. Select Wireless setup.
8. Follow the prompts.
9. Unplug the USB cable and test the setup.

Support phone number: 877-276-8437 or the Brother USA site.

https://smallbusiness.chron.com/install-brother-printers-cd-rom-40133.html

Brother Office... | Answered on Mar 19, 2020


brother printer is unable to print, bcz connection between the computer and the Brother machine is lost. this mainly results of wrong settings or configuration of the printer driver. ... Once you are able to print, enable your firewall again.
Also for any help on Alexa contact me on https://smartbags.online/
echo show and echo show apps-undefined-undefined-0.jpg

Brother Office... | Answered on Mar 19, 2020

Not finding what you are looking for?
Brother DCP-8020 Laser Printer Logo

Popular Tags

10 questions posted

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6960 Answers

Ed
Ed

Level 3 Expert

479 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

DCP Brother

  • DCP Brother

Most Popular Question

brother dcp 8020 error 6a

  • Office Equipment & Supplies
Loading...