20 Most Recent
Zenith SY2551S TV Questions & Answers
Adjust color guns
If you wish to get more details, check this site. Pull up older posts there. Check the site with patience, as it has over
2250 posts now. All are related to
electronic equipment repair help.
Search the site by 'Timeslide' option.
It will make search easy. Or,
type in the brand name to your device into its search box, and press "Enter"
Color too much red
change color settings.i mean turn the red color a bit down so it wouldnt be so red
Ghost image in screen
Check the part labelled A63AGD00X, last numbers and letters may be
different. 99% of Zeniths 25" and 27" size tv sets had the same part from 93 through 96 bad by the time they hit 4 or more years old.
No picture or sound with brand new xbox friend's xboxs worked ok
Look like ur Xbox 360 AV RCA cables is not making contact to the input board very well.Take some rubing achahol cleans the all those input holes,take the RCA AV connections make couples twises to the red,yellow and white,will help.Make contact with ur input board it should work.
I can't seem to get
Ok, I will need the philips universal remote model number so I can give you exact and correct information.
Connecting dvd player to zenith sy2551s system and doesn't work
Yes, You need to be on AUX ,you can get to that setting by pressing channel 01 then press the channels down button instead of going to channel zero it will start to cycle through your AUX's inputs on the back of the tv.Also, another way to do this is on the original remote there will be a SOURCE button or INPUT button that can also cycle your TV through the aux inputs.REMEMBER.Make sure your DVD player is turned on and hooked up or else the AUX screen will be black.Rate me when you fix it!GOOD LUCK
No picture
gets white horizontal streaks for a split second, then back to no picture.
i think sound will be alright.
while horizontal streaks are called retace lines & is due to video section failure.
please call skilled tech to fix it
it is not a major problem & can be rectified.
at your place without replacing much parts.
your tube is ok.
good luck
Manufactured January 1997 - Blurry white letters
Your TV is nearly 10 years old. Over a period of time, the Picture tube has become weak! (Technically, the Electron Emmissions from the Electron Heater Element has become reduced) Permanent solution is to replace it, but the cost will be prohibitive. Best is to get a new TV. Otherwise, take it into a Technician Shop, who will recondition it for a modest fee.
Demo mode
go into menu and find the service mode and turn off the demo there
My zenith CD/DVD duplicator LCD light on but no ready
If the LCD light on your Zenith CD/DVD duplicator is on but it is not showing as "ready," it is possible that there is an issue with the duplicator's internal components or settings. Here are a few troubleshooting steps you can take to try and resolve the issue:
Check the disc trays: Make sure that all of the disc trays are closed properly and that there are no discs stuck inside the duplicator. If a tray is open or a disc is stuck, the duplicator will not be able to operate properly.
Check the power source: Make sure that the duplicator is plugged into a working power source and that the power cable is securely connected to the duplicator. If the power source is not providing enough power, the duplicator may not be able to operate.
Check the settings: Check the duplicator's settings to ensure that it is set up correctly for the type of disc you are trying to duplicate. For example, if you are trying to duplicate a DVD, make sure that the duplicator is set to duplicate DVDs and not CDs.
Reset the duplicator: Try resetting the duplicator by unplugging it from the power source for a few minutes, then plugging it back in and turning it on. This can sometimes resolve minor issues with the duplicator's internal components.
If none of these steps resolve the issue, it is possible that there is a more serious issue with the duplicator's hardware or software. In this case, it may be best to contact Zenith customer support or a professional technician for further assistance.
Not finding what you are looking for?