20 Most Recent Brother MFC-7220 All-In-One Laser Printer Questions & Answers

1,check the scannor unit,which is doccument feed in open the cover look the piece glass is clean.
2, replace drum cartridge.

Brother MFC-7220... | Answered on Nov 27, 2018

The photosensitive drum needs to be cleaned or replaced. If after cleaning it the vertical line continues, the printer may need maintenance.

Brother MFC-7220... | Answered on Nov 16, 2018

This one made me crazy, but I finally figured it out. Turn the machine around so that you are facing the back. Open the back cover. Pull down the second smaller roller cover inside the machine. If you look closely at the second smaller cover, on the right hand side (closer the the inside of the machine), is a very thin round piece of plastic that is only half the length of the smaller cover. There are 2 thin plastic tabs attached to either end of this round piece of plastic. Gently shift this over so that the 2 plastic tabs can now go into the space provided for them. I had to move mine over only 1/4 inch.

Brother MFC-7220... | Answered on Feb 02, 2018

On the left side of your toner there is a half circle with a small plastic inside. use a screwdriver and rotate it 90 degrees anticlockwise

Brother MFC-7220... | Answered on Dec 23, 2015

If it still prints ignore it.
if you rather call the vendor. Ifyou're under warranty. They may replace or repair it.

Brother MFC-7220... | Answered on Dec 23, 2015

It sounds like the corona wire may be dirty. Its a wire that self-charges to attract toner to the paper. Read your manual and see if it mentions print quality problems. If you decide to check inside this device, please disconnect the power cord.

Brother MFC-7220... | Answered on Mar 01, 2015


Or you may download the complete user's manual here:

Brother MFC-7220... | Answered on Apr 29, 2014

Go To Below official Brother Printer Video For Your problem, Still having Problem Then follow Us For
Brother Printer Support

Brother MFC-7220... | Answered on Feb 24, 2014

It could be that the person you're sending a fax to has their fax machine off or is out of paper. Also try to send to a different fax number to rule-out its not your printer.

Brother MFC-7220... | Answered on Dec 22, 2013

try some air in a can and blow out were the papper is at.

Brother MFC-7220... | Answered on Dec 15, 2013

If the paper is jamming at the exit rollers, you will be need to clean the rubber on the rollers. It gets shiny and does not grip the paper to take it away.
I clean the rollers with Isopropyl Alcohol and the green kitchenlb_icon1.png scouring pads. When the rollers are shiny they often have white/grey markings on them. Keep scrubbing until rubber is roughened up.

Brother MFC-7220... | Answered on Oct 14, 2013

Not finding what you are looking for?
Brother MFC-7220 All-In-One Laser Printer Logo

223 questions posted

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts


Level 3 Expert

1363 Answers

James Cagle
James Cagle

Level 2 Expert

482 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6960 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

MFC Brother

  • MFC Brother

Most Popular Question

brother mfc 7220 printer show toner

  • Office Equipment & Supplies