20 Most Recent Brother HL-2070N Laser Printer Questions & Answers


Brother HL-2070N Laser Printer won't turn on

the problem coming from the LVPS or Main board pcb . may need to be replace both of it.need to verify by a engineer.
11/14/2021 6:34:42 AM • Brother HL-2070N... • Answered on Nov 14, 2021

Printer will only print one page at a time when

Some printers have setting that as the toner cartridge is low will allow you to only print one. Check your toner...
7/30/2021 9:47:44 AM • Brother HL-2070N... • Answered on Jul 30, 2021

Brother HL-2070N red "paper" light flashes after a paper jam

Try this
[LED Indication]

The Paper LED is flashing.

Meaning of LED Indication
Front cover is open:
Close the front cover of the printer.

Back cover is open:
Close the back cover of the printer.

Paper jam:
Clear the paper jam. To see paper jams and how to clear them, click here. If the printer does not start printing, press the Go button.

No paper fed manual feed slot:
Put the paper back in the manual feed slot.

Memory full:
The printer memory is full and the printer cannot print full pages of a document.

Print overrun:
A print overrun occurred and the printer cannot print full pages of a document.

Clean drum unit:
The corona wire needs to be cleaned.

Oleg Andrukh IT Specialist
PhillyCopiers.com 215 364 3774
2/9/2021 11:35:47 AM • Brother HL-2070N... • Answered on Feb 09, 2021

Brother lc1100hy printer offline can't get it to go online

As you've noticed, the Brother printer goes offline with a single update to Windows 10. Even so, Windows 10 updates or driver upgrade is not the only cause for your printer to be offline. The key reason behind a brother printer that displays an offline message in windows 10 is the connectivity issue. Reasons that cause Brother Printer Offline:- 1.As cable disconnection could also be a reason for the Brother printer offline issue. 2.Faulty USB connections can arise printer offline Step to fix Brother Printer Offline Windows 10 1.Verify the Brother Printer turned ON and there are no errors on screen. 2. Make sure the Brother printer is connected to the computer properly. 3. Make sure your Brother Printer is set as the default printer in Windows 10 settings. 4. Delete all print jobs from the printer properties option. Expert Advice - Brother Printer Offline Windows 10

10/6/2020 6:47:26 AM • Brother HL-2070N... • Answered on Oct 06, 2020

Orange light is on ,printer does not operate

click the power button for 5 mins nd click again to open it . .
6/12/2016 3:40:21 PM • Brother HL-2070N... • Answered on Jun 12, 2016

A green light is flashing and a steady orange light in the back of my Brother printer, what does it mean?

they mean you are connected to the internet. flashingmeans you are sending and receiving data.
5/8/2015 2:56:32 AM • Brother HL-2070N... • Answered on May 08, 2015

Will not feed paper

Sounds like the gears are out of alignment for the paper pick up tray.
3/9/2015 3:26:54 PM • Brother HL-2070N... • Answered on Mar 09, 2015

How to replace paper feeding kit hl 2070n

Unless something is actually broken, I have usually found that the rubber rollers and belts need cleaning. The manual details which ones to clean with rubbing alcohol, but they are mostly at the front of the machine and can be found by removing the paper tray.
8/14/2014 12:19:46 PM • Brother HL-2070N... • Answered on Aug 14, 2014

How do i remove the drum?

Open the front hatch, grab a good hold on the assembly inside. Lift up and pull towards you firmly. The drum and toner assembly will slide out together. Separate the toner and drum unit by pressing down on the coloured tab and lift the toner (TN) up and out. The drum is the part labelled DR.
5/12/2014 8:49:43 PM • Brother HL-2070N... • Answered on May 12, 2014

Thin paper keeps jamming

According to fusing (heating) at last final, thin paper is not possible to print in laser printer. it is better to use with little 70gms thick paper together using glue at feeding side only.
12/30/2013 5:21:36 AM • Brother HL-2070N... • Answered on Dec 30, 2013

HL-2035 ALL Leds light up solid

Try resetting the printer. Disconnect power and reconnect after a minute. If not ok, make sure the drivers are uptodate.
12/15/2013 1:39:44 AM • Brother HL-2070N... • Answered on Dec 15, 2013

When I print with my brother hl-2070n...the print out is very very faint. i have changed the toner and drum...any suggestions?

if you printing is just faint, need to replace toner, but if your printing is faint and blurry, need to add grease to the fuser film roller, need advanced skills for that, disassemble the fuser unit take out the fuser film and put some special high temp grease on the heating element, assembly all back and install, the other way is replacing the fuser unit
12/2/2013 8:06:52 PM • Brother HL-2070N... • Answered on Dec 02, 2013
Not finding what you are looking for?
Brother HL-2070N Laser Printer Logo

242 questions posted

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts


Level 3 Expert

13435 Answers

Cindy Wells

Level 3 Expert

6394 Answers


Level 3 Expert

8092 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

HL Brother

  • HL Brother

Most Popular Question

lights back printer mean

  • Office Equipment & Supplies