20 Most Recent
Zenith B27A30ZC TV Questions & Answers
I have a zenith plasma tv and it went out and will
no there is no reset button in zenith plasma tv.but in the tv there is a small fuse located on the main board of the tv.but if there is no light on the front panel of the tv then it is very much possible that safety fuse of the tv is blown out.the cost of fuse is near to $3.its made up of glass and looks like mini tube light.but if there is light on the panel but still tv is not coming ON then its not the fuse.because if fuse blows there will be no-power in the front panel of the tv.so the other option if there is a front panel light in the tv is.that in the tv there is a main board.on that main board there are several components.called capacitors and IC.any of that capacitors and IC are gone short so the circuit is not getting completed and the tv is not turning ON.The capacitors and IC which are blown will look bit bulged at its top or will look leaked at its top or will have burn marks on its side.the value of that particular component will be mentioned on its side.for getting the parts you can get it from
------ www.radioshack.com or from ------ www.shopjimmy.com -------
in some of the rare cases its seen that all the components on the main board looks proper and whole board goes faulty due to internal short circuit.so whole board needs replacement.but its very rare.it happens if any major short circuit has occurred before the problem occurred in the tv.
-------------
if you are familiar with using soldering iron and multi meter you can get it checked manually and replace the faulty parts.other wise a local tv repair technician will be helpful.
--------------
this will help.thank you for using fixya.please do rate the solution.thanks.keep updated.
Add and delete chanel
I bought my Zenith in 2000 and it works fine but in moving it I dropped it and now I have no sound can you help me?
How do i turn it into input from tv
Look for an AV button or an option through the menu. However, I have seen a few TV sets that require a remote. Try getting a universal remote if you can't find these options.
My zenith CD/DVD duplicator LCD light on but no ready
If the LCD light on your Zenith CD/DVD duplicator is on but it is not showing as "ready," it is possible that there is an issue with the duplicator's internal components or settings. Here are a few troubleshooting steps you can take to try and resolve the issue:
Check the disc trays: Make sure that all of the disc trays are closed properly and that there are no discs stuck inside the duplicator. If a tray is open or a disc is stuck, the duplicator will not be able to operate properly.
Check the power source: Make sure that the duplicator is plugged into a working power source and that the power cable is securely connected to the duplicator. If the power source is not providing enough power, the duplicator may not be able to operate.
Check the settings: Check the duplicator's settings to ensure that it is set up correctly for the type of disc you are trying to duplicate. For example, if you are trying to duplicate a DVD, make sure that the duplicator is set to duplicate DVDs and not CDs.
Reset the duplicator: Try resetting the duplicator by unplugging it from the power source for a few minutes, then plugging it back in and turning it on. This can sometimes resolve minor issues with the duplicator's internal components.
If none of these steps resolve the issue, it is possible that there is a more serious issue with the duplicator's hardware or software. In this case, it may be best to contact Zenith customer support or a professional technician for further assistance.
Not finding what you are looking for?