20 Most Recent
Zenith DVC2200 DVD Player Questions & Answers
I have a Zenith DVD
The processor is locked do to a small power surge and if you leave it unplugged for 30 Min., then it will reset back to normal.
Dvd player won't open
There should be a manual release look on the underside for a slotted hole slide this across with a screwdriver it should release the tray.
Zenith DVC2200
Has your machine ever played CDs? There could be a problem with the maximum speed you are making your CDs with. Try a much slower speed. Just because the discs say they can be burned at such and such a speed does not mean that that's the optimum speed for your computer...accordianman
Zenith DVD Parental Lock
Try power on the player with no disk in the drive. Press "PAUSE" on the remote. Enter "3 1 4 1 5 9" on the remote (the word COdE appears on the display).
Enter "0" on the remote (0 = All Regions, 1 = Region 1, 2 = Region 2,
etc.) . Press "PAUSE" on the remote. Power the player off and then back on
Display problems
MacrovisionAn
analog video copy protection scheme that alters the unseen part of a
video signal such that a VCR or other macrovision enabled device may
not record the video signal properly. There are several types:
- Automatic Gain Control
- 2-line color stripe
- 4-line color stripe
Symptoms of this include picture fading in and out or color banding of the signal.
Zenith DVC 2200 brightness issue
MacrovisionAn
analog video copy protection scheme that alters the unseen part of a
video signal such that a VCR or other macrovision enabled device may
not record the video signal properly. There are several types:
- Automatic Gain Control
- 2-line color stripe
- 4-line color stripe
Symptoms of this include picture fading in and out or color banding of the signal.please mark the post as fixya!
Password
Hi,
May I suggest that you make the player region free?
Multi Region Hack
1. Power on the player with no disk in the drive
2. Press "PAUSE" on the remote
3. Enter "3 1 4 1 5 9" on the remote (the word COdE appears on the display)
4. Enter "0" on the remote (0 = All Regions, 1 = Region 1, 2 = Region 2, etc.)
5. Press "PAUSE" on the remote
6. Power the player off and then back on
My zenith CD/DVD duplicator LCD light on but no ready
If the LCD light on your Zenith CD/DVD duplicator is on but it is not showing as "ready," it is possible that there is an issue with the duplicator's internal components or settings. Here are a few troubleshooting steps you can take to try and resolve the issue:
Check the disc trays: Make sure that all of the disc trays are closed properly and that there are no discs stuck inside the duplicator. If a tray is open or a disc is stuck, the duplicator will not be able to operate properly.
Check the power source: Make sure that the duplicator is plugged into a working power source and that the power cable is securely connected to the duplicator. If the power source is not providing enough power, the duplicator may not be able to operate.
Check the settings: Check the duplicator's settings to ensure that it is set up correctly for the type of disc you are trying to duplicate. For example, if you are trying to duplicate a DVD, make sure that the duplicator is set to duplicate DVDs and not CDs.
Reset the duplicator: Try resetting the duplicator by unplugging it from the power source for a few minutes, then plugging it back in and turning it on. This can sometimes resolve minor issues with the duplicator's internal components.
If none of these steps resolve the issue, it is possible that there is a more serious issue with the duplicator's hardware or software. In this case, it may be best to contact Zenith customer support or a professional technician for further assistance.
Not finding what you are looking for?