20 Most Recent
Panasonic KX TG4031 Cordless Phone - Page 4 Questions & Answers
Says line is in use but that is not the case
Even if you have tried a power off reset, as in the posted link, it could be a timing thing to reset, sometimes a component has to discharge.
Following the links advice, try increasing amounts of time. What length is reasonable if it does not reset in minutes? Don't see that posted anywhere, maybe our, or overnight.
https://forums.att.com/conversations/att-phone-equipment/landline-busy-signal/5df025a2bad5f2f606944631
Why does only one of my Panasonic cordless phone display busy
That that handset has lost its "pairing/registration" with the base. Initially, try to pair it again with the base. Should that not be corrective, remove the battery of the handset. Allow it in the unpowered condition for a few hours. The idea is to reset the handset back to factory defaults. Thereafter, install the battery and re-charge. "Pair/register' with the base.
The intercom on my panasonic kx-T7730 won't turn off, how do I fix this?
La fa?on de d?sactiver l'intercom sur votre t?l?phone Panasonic d?pendra du mod?le exact que vous avez. Voici quelques ?tapes g?n?rales que vous pouvez suivre pour d?sactiver l'interphone :
- Appuyez sur le bouton "Menu" ou "Menu principal" sur votre t?l?phone.
- Utilisez les touches de navigation pour acc?der aux param?tres de l'intercom. Cela peut ?tre sous l'option "R?glages" ou "Intercom" selon le mod?le.
- Utilisez les touches de navigation pour s?lectionner l'option "D?sactiver" ou "Off" pour l'interphone.
- Appuyez sur le bouton "OK" ou "Entr?e" pour enregistrer les modifications.
- V?rifiez si l'intercom est d?sactiv? en essayant de passer un appel.
Il est important de noter que les ?tapes peuvent varier en fonction du mod?le de t?l?phone et de la version du firmware. Il est recommand? de
Panasonic KX-DT543 Phone - Message button calls a phone extension instead of the voicemail extension. How do I change it?
To change the behavior of the message button on a Panasonic KX-DT543 phone, you will need to access the programming menu and change the settings for that button.
- Press the 'Menu' button on the phone.
- Press the '#' button followed by the 'Admin' button.
- Enter the administrator password.
- Press the 'Menu' button again, then select 'System Programming'.
- Scroll through the options and select 'Button Assignment'.
- Find the button labeled 'Message' and select it.
- Change the extension number to the desired voicemail extension.
- Press the 'Save' button to confirm the changes.
I have a Panasonic phone..when I press the flash/call waiting button I get the second call but when I press it again to get the first call I lose the call
It sounds like you are experiencing a problem with your call waiting feature. When you press the call waiting button, you are able to switch between the two calls. If you press the call waiting button again to return to the original caller and the call is disconnected, there could be a problem with the call waiting feature on your phone.
There are a few things you can try to fix this problem:
- Check with your phone service provider to see if there are any known issues with the call waiting feature on your phone.
- Make sure that call waiting is turned on for your phone. This is usually done through the phone's settings menu.
- Try restarting your phone. This can sometimes resolve any issues with the phone's software.
- If the problem persists, you may need to have the phone inspected by a technician to determine the cause of the issue.
Panasonic kx-ts880mx display not working
Hi,
please power cycle the phone unit and check for the display screen when it's on the base again. If still having the issue, please attempt a factory reset of the device. Then, you can setup the phone just as you did when it was brand new. Otherwise, you might have to keep the receiver off of the display in order to allow the screen to show data as it used to.
Thank you.
Panasonic cordless phone always engaged
Hi,
please power cycle the phone to start. If the issue continues, then you can move the phone to another phone outlet. If the problem remains, then you can next factory reset the phone in order to overcome the issue.
Thank you.
My Panasonic base phone does not display anything
Hi,
Please leave a test message to your phone and check the display again. If still blank, please power cycle your phone and or headset before checking the screen again. Otherwise, I would re-read the steps for setting up voicemail on your phone and attempt them again.
Thank you.
How to check phone line on panasonic cordless phone
Unplug all the phones from the mains wall sockets, phone jacks, and remove all the batteries from the handsets.
If you have one, plug in an 'old style' corded phone into the main incoming line box. That is normally the one closest to the door.
If you don't have one, plug in the base unit into that master socket by the front door and the mains and put the battery in the handset. If it has a line, plug in the others, if it doesn't contact your telco.
Panasonic KX-TG1855AL envelope and speech bubble symbol
Hi, you probably won't get this anymore, but here is the fix (I had the same problem and couldn't get rid of it. Had no messages or calls that I hadn't viewed). You will laugh but press the Clear / Mute button for a few seconds. That is the bottom right button out of the four that are around the big round one. It has a C on it, a line under the C and the mute symbol underneath... Good Luck. Julia
Not finding what you are looking for?