Agfa DuoScan Flatbed Scanner - Answered Questions & Fixed issues
Hi - I've just given
You can download the driver for the scanner here:
http://www.nodevice.com/driver/DuoScan_f40/get35689.html
2/9/2011 8:44:22 AM •
Agfa DuoScan...
•
Answered
on Feb 09, 2011
•
75 views
Need a disk
try to donload your scanner driver from intenet in the company site
10/10/2009 5:15:01 AM •
Agfa DuoScan...
•
Answered
on Oct 10, 2009
•
55 views
Lamp replacement
Just replace the lamp! It's just a fluorescent light you can get anywhere. You don't need a new scanner, if I had to replace the scanner every time the lamp died I be in the poor house!
7/22/2009 11:15:58 PM •
Agfa DuoScan...
•
Answered
on Jul 22, 2009
•
683 views
Blinking transparency led
unplug / plug the unit to the computer and to its power adptor.
uninstall / install the driver on your computer.
Let me know.
Thanks
pincer
4/3/2008 2:03:52 AM •
Agfa DuoScan...
•
Answered
on Apr 03, 2008
•
163 views
Agfa DuoScan HiD connected to Mac OSX 10.4.11?
Hi,
Can't get you through Live Chat, in any case should you still need assistance...
"...A
gfa DuoScan HiD from 9 (Mac) to OSX 10.4.11...possible..." - YES;
"...
drivers and software to do it..." - pls try
here.
"...
repairs on the scanner..." - depends where you are, pls try
here.
Good luck and kind regards.
5/26/2008 7:52:33 PM •
Agfa DuoScan...
•
Answered
on May 26, 2008
•
874 views
Trouble with an older scanner
I'm assuming this scanner interface is a SCSI connection. First thing you may want to look at is the SCSI ID number switch at the very back end of the scanner. Before changing the SCSI ID switch make sure your scanner is powered down. Repeat steps above when trying different SCSI ID numbers to see which one works with your computer. If you have other SCSI devices connected make sure they are not sharing the same SCSI ID # which will cause a conflict.
9/7/2007 1:37:41 AM •
Agfa DuoScan...
•
Answered
on Sep 07, 2007
•
490 views
Not finding what you are looking for?