20 Most Recent
Agfa DuoScan Flatbed Scanner Questions & Answers
Hi - I've just given
You can download the driver for the scanner here:
http://www.nodevice.com/driver/DuoScan_f40/get35689.html
I have an AGFA duoscan
Hi.
I quote a technical info taken from Agfa support website (
link here):
"
Mac OS X 10.3 does not support the scanners with SCSI ports:Arcus, Arcus+, Arcus II, Arcus 1200, DuoScan, DuoScan HiD, DuoScan T1200, DuoScan T2000 XL, DuoScan T2500, Horizon, Horizon Ultra, StudioScan, StudioScan II, StudioScan IIsi, StudioStar.
We propose an alternative solution to this problem. Read the instructions as explained in the Frequently Asked Questions section."
Need a disk
try to donload your scanner driver from intenet in the company site
Lamp replacement
Just replace the lamp! It's just a fluorescent light you can get anywhere. You don't need a new scanner, if I had to replace the scanner every time the lamp died I be in the poor house!
Agfa DuoScan HiD connected to Mac OSX 10.4.11?
Hi,
Can't get you through Live Chat, in any case should you still need assistance...
"...A
gfa DuoScan HiD from 9 (Mac) to OSX 10.4.11...possible..." - YES;
"...
drivers and software to do it..." - pls try
here.
"...
repairs on the scanner..." - depends where you are, pls try
here.
Good luck and kind regards.
Blinking transparency led
unplug / plug the unit to the computer and to its power adptor.
uninstall / install the driver on your computer.
Let me know.
Thanks
pincer
Trouble with an older scanner
I'm assuming this scanner interface is a SCSI connection. First thing you may want to look at is the SCSI ID number switch at the very back end of the scanner. Before changing the SCSI ID switch make sure your scanner is powered down. Repeat steps above when trying different SCSI ID numbers to see which one works with your computer. If you have other SCSI devices connected make sure they are not sharing the same SCSI ID # which will cause a conflict.
Not finding what you are looking for?
