20 Most Recent Lexmark F4270 Plain Paper Inkjet Fax Questions & Answers


My Lexmark F4270 wont print and show error1203

Lexmark F4270... • Answered on Nov 07, 2013


Hi,> Install proper drive in you printer number.> Clean virus in PC.> Printer data cable check another printer, if cable not ok then problem solved.> Check printer print setting option.> Printer print LED active mode check. If not active mode not print output.> Power section proper working or not.More Technical Support Visit and call now.Thanks..

Lexmark F4270... • Answered on Sep 06, 2013


Confirm dialing the correct fax number?

Any 0s to get an outside line, any special area codes?

What happens when you try to send a fax, can you hear a dial tone? can you hear the fax ringing? can you hear a response from the recipiant?

Lexmark F4270... • Answered on Jun 17, 2013


The 1200 error is caused by a cartridge carrier stall. This can happen if:
  • The print cartridges are not snapped in correctly.
  • The encoder strip is out of place.
  • A foreign object is blocking the cartridge carrier's path.
You can check this article on how to solve that problem: http://bit.ly/XypLZK

Lexmark F4270... • Answered on Nov 20, 2012


Leading cause of paper jams is debris / foreign objects that accidentally fell into the paper feed area. Please try this approach to fix the problem:

  1. Remove the sheets of paper from the feeder.
  2. Grab a flashlight and look inside the feeder for any debris or foreign objects.
  3. If you're willing and physically able, you may also carefully turn the printer over. Any debris should just freely roll out from the feeder.
  4. If feeder is clear, place the printer on the table. Open the printer cover and remove the cartridges.
  5. Check the cartridge area for any obstructions in the paper path.
  6. Close the printer cover.
  7. Re-brick your printer by pulling out the power supply - the black box where the power cord is plugged into. Re-plug after 30 seconds.
  8. When the printer turns on, reinsert the cartridges and load some paper. Try to print again to verify that the problem is fixed.

Lexmark F4270... • Answered on Mar 15, 2012


Having no Operating Guide, I'd type a one line sample, make a note on the paper like "face-up" and put it in with the paper facing up and hit "print".
If it prints on that side you have your answer. If it prints on the backside, then put your papers in facing down.

Lexmark F4270... • Answered on Jun 20, 2011


check ur line is current passing through the line or not if not check or find the breakage

Lexmark F4270... • Answered on Mar 16, 2011


Is your line fax enable? If not, definitely you cannot receive fax just sending only. Check you telephone provider.

Lexmark F4270... • Answered on Mar 09, 2011


my fax is not faxing nor my scanner, all I cna do is print.

Lexmark F4270... • Answered on Sep 23, 2010


Call the fax machine using a regular phone to see if it answers.

Lexmark F4270... • Answered on Jun 01, 2010


Error code: 1200
But it is the same as the Lexmark.

This error code is commonly associated with the Dell 922 printer. Usually you might see the cartridge moving front and back and slamming itself against the printer. You need to tighten the strings located on the back of the printer and then it should work fine

Clean the carriage rail. This is the round chrome piece that the carriage assy that holds the cartridges rides on. Use a paper towel that is slightly moist.
Be sure to not force anything. Unplug the printer after you get the carts in the middle. Move them to one side and clean and then move them to the other and repeat.


Lift up the scanner to reveal the cartridge compartment; under the chrome rod on which the cartridges run there are two small gaps about 8cm apart. In the right one should sit the paper sensor which is a small black rod that hooks downwards; the problem I had was my sensor had bent up and out of the gap so all I had to do was bend it gently back into position using a small screwdriver.

Hope you get it to go.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Lexmark F4270... • Answered on Apr 28, 2010


This is the inks

ERROR 1203 LEXMARK ERROR 1200 Error 1203 is an issue that occurs either when a cartridge is bad or the printer cartridge Slot is bad...

1 - try cleaning the copper contacts of the both carts and cart slot in the printer and try again..
or
2 - when error shows up, shut the printers power off; wait one minute and turn it back on press copy.

Lexmark F4270... • Answered on Apr 25, 2010


Yes ok try this
Error 1203 is an issue that occurs either when a cartridge is bad or the printer cartridge Slot is bad...

1 - try cleaning the copper contacts of the both carts and cart slot in the printer and try again..
or
2 - when error shows up, shut the printers power off; wait one minute and turn it back on press copy.

Lexmark F4270... • Answered on Apr 25, 2010

Not finding what you are looking for?
Lexmark F4270 Plain Paper Inkjet Fax Logo

Popular Tags

94 questions posted

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

6259 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

efs_perpends
efs_perpends

Level 3 Expert

1997 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Lexmark Office Equipment & Supplies

  • Lexmark Office Equipment & Supplies

Most Popular Question

fax not recive

  • Office Equipment & Supplies
Loading...