20 Most Recent Disney DT1300-C 13" TV - Page 8 Questions & Answers

Luxor-46ccflt2 where to get firmware

Luxor would be a possible source.

Televison &... | Answered on Jan 19, 2021

The tv is not working it’s giving me smart tc lodging and then back screen

In many instances this problem is caused by a bad driver board,and LEDs, or possibly a faulty T-Con board in the TV. It might also be a problem with bulging capacitors or either a loose cable or ribbon connector. You will have to take the TV apart and diagnose the problem.

Televison &... | Answered on Jan 19, 2021

2 Answers

Walton crt tv service code mode

If you wish to get some details; visit the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular
Check your TV and just find which Kit is used with it. You should search for that Kits, service mode.
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.
NB: Please read and understand well, the instructions to enter the service mode, before you begin. Be very careful. Note how to "EXIT" the service mode; after entering and adjusting data. This is very important.
Search the site by type in the "brand name" of your device; (Exclude the model number), in the "Search box at the top right of the display window of the Homepage" to get gathered related posts/

Televison &... | Answered on Jan 18, 2021

1 Answer

I have a Vizo Model E70-E3 and am trying to order the LED backlight strips. How do I determine which strips I need?

Seems simplest to conduct a search for the model plus the phrase LED backlight strips. This yields the following from Amazon:

https://www.amazon.com/LB70006-Replacement-Backlight-Strips-E70-E3/dp/B07GC6MC8K

Televison &... | Answered on Jan 18, 2021

1 Answer

When I turn my tv screen on the screen is like a muted purple/grey. All the colours are frosty. The tv is still working its just the colouration. Can anyone help? Been trying all day

Disconnect from the wall for an hour. Go back in and find Settings - Picture - Colour, Brightness, Contrast

click the command for Reset to Factory Settings

Televison &... | Answered on Jan 17, 2021

1 Answer

The circuit board smells burnt

Look for brown crispiness on it or marks around soldered components. Never a good sign.

Televison &... | Answered on Jan 17, 2021

1 Answer

My TV screen is black but there is a sound

probably backlight issue try shining a bright torch onto the screen up close . if you can see images then you have one or more LEDs blown . as they are in series non of them will work until the defected LEDs are replaced

Televison &... | Answered on Jan 17, 2021

0 Answers

Codes for logik, urc-d4f

Televison &... | Posted on Jan 17, 2021 | Be the first to answer

0 Answers

How can I fix My HD decoder it only shows red light I've tried to press power button and use a remote control still it doesn't work?

Televison &... | Posted on Jan 17, 2021 | Be the first to answer

1 Answer

What is Code EO14

Error code E14 means that there is a fault to a water heating or control board fault. Turn off and unplug your washing machine and call a repair person then.

Televison &... | Answered on Jan 16, 2021

1 Answer

How do I get this remote to sync to my Toshiba Tv

Just managed to see the model number!

Toshiba CT-90325 Remote Instruction Manuals and Codes.

www.directutor.com > remotes > Toshiba_CT-90325_R...

The Toshiba CT-90325 full-function or Universal remote control to operate varios devices and you can program the remote control to operate most of the popular brands of audio/video equipment like a TV, a DVD player (or VCR), or a Network satellite receiver.

Televison &... | Answered on Jan 15, 2021

1 Answer

TCL model 55s401taaa TV. Why doesn't it work?

If all 3 boards were good then the only thing left is the panel board that is part of the panel and not replaceable.

Televison &... | Answered on Jan 15, 2021

0 Answers

How do I enter the codes on my redi remote?

Televison &... | Posted on Jan 15, 2021 | Be the first to answer

1 Answer

Vizio D39hn-E0. Replaced the main board. Why there still a white screen when powered on?

Make sure your LVDS cable is making good connection. Was the white screen your original problem?

Televison &... | Answered on Jan 15, 2021

1 Answer

TCL Tv. Why does screen flicker?

Bad LED lamps

Televison &... | Answered on Jan 15, 2021

1 Answer

Supra TV, model stv5099w Y1. What is service code?

Are you asking how to get into the service menu?

Televison &... | Answered on Jan 15, 2021

1 Answer

Where is the factory reset button on a dmr-ez485v vcr/dvd recorder.

With unit stopped, open the disc tray by pressing the eject button. Then press the 'record' and 'play' button simultaneously for about 5 seconds. To reset the unit, if freezes: Press and hold the power button for more than 10 seconds.Oct 30, 2010

How to reset to factory specs a panasonic dmr-ez485v I do not ...

Televison &... | Answered on Jan 15, 2021

1 Answer

Manual for carib ur400l universal remote

Contact Carib directly to request the manual.

Televison &... | Answered on Jan 14, 2021

0 Answers

How to enable HDMI so Amazon Fire Stick

Televison &... | Posted on Jan 14, 2021 | Be the first to answer

1 Answer

Having an issue w/ TCL 55P605 TV.OK when powered on.Colors fade gradually.Picture also slowly turns fuzzy.Whole process starts over when I turn it off then on again.Wondering if I can DIY the repairs.

Never heard of that issue before. Repair issues are a problem. That sounds like a component on one of the boards is heating up, failing, cooling a bit and then cycling again.

Here is a cautionary tale I published. Many don't like the advice, but it is the best advice!

https://www.fixya.com/support/r29790007-repairing_own_television

Televison &... | Answered on Jan 14, 2021