20 Most Recent Disney DT1300-C 13" TV - Page 6 Questions & Answers

1 Answer

Player sticks and won't play.

Buy a lens cleaner...about $10-$15

Disney Televison... | Answered on Jun 10, 2011

0 Answers

I own a Disney PC1500LT

Disney Televison... | Posted on May 07, 2011 | Be the first to answer

1 Answer

I'm trying to get my daughters wii to work on her

Typically if the connection on the tv doesn't work right away with the composite cables, (red white and yellow) it's the cables.
I would suggest you replace the cables that you're using, this may alleviate the issue.

Disney Televison... | Answered on Mar 16, 2011

1 Answer

We purchased a mickey mote

did u ever find a resoulution?? we just purchased one as well. that came with mickey round up dvd..we purchased a compatiable handy manny an baby einstien dvd. we cant get mote to work...or do set-up. Any suggestions??

Disney Televison... | Answered on Feb 13, 2011

0 Answers

NO PICTURE-NO SOUND> REDLIGHT COMES ON ONLY

open the set and look for any blown fuses or a shorted transistor, now if do not have repair skills call the repairman this could be a headache
he should not charge you too much since this is an old tv. with parts and labor no more than $150.00
good luck

[email protected]

Disney Televison... | Answered on Oct 28, 2008

1 Answer

Portable DVD player for the

diseny site or ebay

Disney Televison... | Answered on Oct 07, 2008

1 Answer

High school musical tv

Resetting the TV
If the buttons on the remote AND the buttons on the TV case do not work (channels do not change and you cannot open or navigate the menu), the TV has stopped responding. Reset the TV as follows:
NOTE:
Some TVs have a reset button. If available and accessible, try using the reset buttons before using the steps below. Using the reset buttons can save time.

1. Unplug the TV power cord from the power outlet for 4 hours.
2. Unplug any connected devices (DVD, Set-top boxes, etc...)
3. Press and hold the TV power button for five seconds.
4. Plug the TV power cord back into the power outlet and turn on the TV.
5. Open the on-screen menu to confirm that the TV is responding again.
6. Turn off the TV and reconnect the devices.
7. Turn on the TV.

hope this may help;

Regards,
VOTIT

Disney Televison... | Answered on Sep 07, 2008

1 Answer

Where is the factory reset button on a dmr-ez485v vcr/dvd recorder.

With unit stopped, open the disc tray by pressing the eject button. Then press the 'record' and 'play' button simultaneously for about 5 seconds. To reset the unit, if freezes: Press and hold the power button for more than 10 seconds.Oct 30, 2010

How to reset to factory specs a panasonic dmr-ez485v I do not ...

Televison &... | Answered 12 hours ago

1 Answer

Manual for carib ur400l universal remote

Contact Carib directly to request the manual.

Televison &... | Answered 16 hours ago

0 Answers

What is Code EO14

Televison &... | Posted 16 hours ago | Be the first to answer

0 Answers

TCL model 55s401taaa TV. Why doesn't it work?

Televison &... | Posted 17 hours ago | Be the first to answer

0 Answers

How to enable HDMI so Amazon Fire Stick

Televison &... | Posted 22 hours ago | Be the first to answer

1 Answer

Having an issue w/ TCL 55P605 TV.OK when powered on.Colors fade gradually.Picture also slowly turns fuzzy.Whole process starts over when I turn it off then on again.Wondering if I can DIY the repairs.

Never heard of that issue before. Repair issues are a problem. That sounds like a component on one of the boards is heating up, failing, cooling a bit and then cycling again.

Here is a cautionary tale I published. Many don't like the advice, but it is the best advice!

https://www.fixya.com/support/r29790007-repairing_own_television

Televison &... | Answered 23 hours ago

1 Answer

Naxa nt5502k. Why is backlight voltage dead on mainboard?

Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Pull up older posts or search the site by type in the brand name of your set, at its search box at the right column.. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/
https://elektrotricks.blogspot.com/

Televison &... | Answered Yesterday

1 Answer

I have tedelex TV old version it controls it self , like it press all buttons same time , what is the problem and solution?

Clean all the buttons on the remote control with a soapy cloth. Remove the batteries. Do it with the remote upside down, press all the buttons. Rinse with clean water. Leave to dry. Put new batteries back in.

Televison &... | Answered Yesterday

1 Answer

"No stored channels found. Please run Auto Tuning

If it was working fine before, you have changed Source or Input to an HDMI port, or Cable, Satellite, feed that is empty.

If it is new, read the manual.

Televison &... | Answered 2 days ago

1 Answer