20 Most Recent Durabrand DU1901 TV - Page 2 Questions & Answers

Coby TFDVD has no setup codes with any of RCA universal remote controls.

0189 0135 0157 0153 0254 0458 0217 Check these codes. For more details, visit this site. Electro-helpSearch for it either by Google or Yahoo.

Google the model number of the remote and the TV to locate "manual" and possible codes listed in it.

The TV need service. Contact any experienced service technician.

GOOGLE THE MODEL NUMBER for owner/instruction manual if you do not have it. If you are "locked out" you may have to spend some real time searching for a way to get in.

Try the codes for Orion, Sansui, and Emerson.

There is a part of the set up called PP set volume to the level you want it at there.

Hi L. Pruett, my name is Mike Houston of DISH Network and withthe Durabrand TV there are a couple of codes we do have for that TV. The threedigit codes will be 220 and 233 and what you will want to do is hold down the clearTV button until all the mode buttons light up. Press one of the three digitcodes I have sent press the # button and then press the Red TV button on theremote, the TV should have turned off and if not after trying the two 3 digitcodes I will send you a link for a Power Scan; http://www.dishnetwork.com/SupportSection/power-scan-instructions- Mike H.

Hello
If your Duraband TV has and S-Video socket you can connect the laptop to that socket from your laptop. After connecting it, switch ON both the devices and select the TV input to S-Video. In some duraband sets, this selection can be done with selecting Vodeo-1, Video-2 etc. If the TV is compactable with your Dell, the Logo of Dell will be there on the screen. There is no details about your Duraband model in internet now. If you want anymore assistance, feel free to get me by FixYa. OK.

I live in Arlington, I have 1 universal control that works with durabrand, this is my email [email protected]

unfortunately not. I had the same problem, in the end i had to go and but a universal remote (which are very cheap, depending on where you look!). After you have your remote, the code you need to sync. the remote to the TV is 210

Which brand and model of universal remote do you have?

Hello; Somewhere on your remote you can turn off ALL closed captioning! Read or download your owner's manual. This info is in there. John

Hi tgraves, my name is John. Welcome to FixYa. Adjust the brightness a little. Thanks for choosing FixYa....John

Hi, I used the code 0463 for my DU1901 and it worked.

Very easy to find out just plug it in.Have an antena,get picture ur tv work with digital,their no more analog signal out there.