20 Most Recent
Porter Cable Cable Premium Pressure Washer PCH2425 - Page 2 Questions & Answers
I have 18 volt Porter
No they are two different types of battery on the inside but the electric charge they put out is the same.
How do I adjust the
The porter cable belt sanders have an adjustment knob (threaded screw with a black plastic t-nut on the end). The knob adjusts the angle of one of the rollers and thus the tracking of the belt. The know takes very little adjustment to change the belt's tracking.
Is the know perhaps missing? You can get replacement parts for for porter cable tools at www.servicenet.com.
Hope this helps.
Yesterday I purchased a Porter
Hi psiaak,
You should have gotten all that when you purchased that equipment. If I were you I would go back and demand that paperwork, just because it is a floor model (demonstrator) you should still be able to get those papers. You should be able to go to the Porter Cable web site and get that. Hope this helps. All the best and good luck. Denis.
I have a Porter Cable
Hi and welcome to FixYa, I am Kelly.
http://servicenet.deltaportercable.com/Products/Detail/H450IS-W
The problem is there are 3 wheel kits for generators. The compact kit has the wheels mount on the inside of the frame while the regular and premium wheel kits have the wheels mounted ouside the frame. I need to know which wheel kit you have. PN of the kit.
See portability Kit instructions to assemble
the portability kit.
Thanks,
Kelly
I have a Porter Cable
It hnk i have the same gun. i have know idia where you found the modal # mine is an 18 volt nica battery and iv'e had it for a year and the 7 inch saw i also use them for work and like them and had no problems. But i found the manual that came with it just no modal or serial # eighter for that matter. I says there is a 1 year free serivice for worn parts under normal use. that would deturmin. Then i started looking closer and found a 3 year warranty for faulty meterals or workmanship and thats also free. Give me a fax # and i'll send it to you or
www.portercable.com and they have an # 888 848 5175 truthfuly the manual is not vary helpfuf dosn't cover much but if you need the warranty in wrighting i can send it to you
I have a 2004 Porter
there should be a return spring on gov...some where u might be looking for just a loop where iy should hook
Hot water coming out of a cold water pressure washer
This sounds like a heat transfer problem
You should check that the oil reservoir for the pump has oil in it. It sounds like it may be low. Also, if it is a gas model, the engine oil may be low.
Remember the pump oil reservoir should be only 1/3 to 1/2 full of non-detergent oil.
Not finding what you are looking for?