20 Most Recent Symphonic SC1302 Combo Questions & Answers

Hi
Setup code for Symphonic TV/DVD combo with One for all URC-3300 universa remote control is;
0000
An other code to check is: [ 0456 ]
OK.

look u cant chane directly to channel 3,,,there is a solution,,jst do it mannually from the buttons available on the t.v

You gotta change the vcr motor charge belt because is in bad conditions .Good luck.

You gotta change the vcr motor charge belt.Its all the problem good luck.

Change the belt of the vcr motor charge is all the problem.Good luck.

You gotta change the belt of the motor charge in the vcr thats all the problem.

If you are seeing snow on your Symphonic TV screen, it could indicate that the TV is not receiving a signal from your cable or antenna. Here are some steps you can take to troubleshoot the issue:

1. Check the cable or antenna connection: Ensure that the coaxial cable or antenna is securely connected to the TV and the wall or source.
2. Run a channel scan: Perform a channel scan or auto-programming to ensure that the TV is tuned to the correct channels and that it is receiving a signal.
3. Check the TV's settings: Make sure that the TV's input is set to the correct source, such as cable or antenna. Also, ensure that the TV's settings are not set to "mute" or "no sound."
4. Try a different device: If you have another device, such as a DVD player or gaming console, try connecting it to the TV to see if it is able to display video and sound.

If none of these steps work, you may need to contact a professional technician or the manufacturer for further assistance.

https://codesforuniversalremotes.com/remote-control-codes-for-symphonic-tvs/

Connect the converter box to TV, (usually rca connectors) connect an antenna to the box, turn it on and search for available channels. In most areas you should receive 10-20 channels.

Gave to you already.

Symphonic TV 3 Digit Remote Control Codes 198 003 053 155 189

Symphonic TV 4 Digit Remote Control Codes 1280 1384 1483 1484 1024 1031 1036 1105