20 Most Recent Fisher RS920 Questions & Answers

Fisher ca 9025 amplifier

For those who accidently put thier CA-9025 in standby mode by hitting the timer button and no longer have the remote, I figured out how to turn them back on.

Turn on the power button and press and hold the Tuner button for at least 10 seconds. it should come back on :) Hope that helps.

Read full answer

Fisher RS920 • Answered on Sep 18, 2013

5 Answers

My fisher ca 9025 come out of standby for alil then goes right back in

Be the first to answer

Fisher RS920 • Posted on Dec 08, 2011

0 Answers

I NEED BELTS PART NUMBER >!! FOR

here ya go these guys have it

http://www.lpgear.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=LG&Product_Code=FISB02a

Read full answer

Fisher RS920 • Answered on Aug 15, 2010

1 Answer

How to get radio stations that arent preset on fisher rs 920

Select manual tuning

Read full answer

Fisher Audio... • Answered on Apr 09, 2021

2 Answers

Vintage Fisher RS 853 gets power but won't turn on.

Assuming that rs853 is very similar with rs911, there are 2 ac transformer, one high power transformer for audio amp and a small tranf for control/protection mounted on printed board. The big one is powered via relay contact, if the small one is powered and control signal is ok (relay energized). First check the fuses, transformers continuity, big electrolytic capacitors for damage, if small transf is energized, and power relay is not energized probably is a control / protection problem, in this case check power amp. Also check power connections, can be a loose connection or power switch problem. Electrical diagram for rs 911 you can find at https://elektrotanya.com/fisher_rs-881_rs-611.pdf/download.html#dl unfortunately RS853 is not available for free download

Read full answer

Fisher Audio... • Answered on Jan 18, 2021

1 Answer

I have a Fisher TAD 9215. Works great. However, the digital display for the tuner is blank. Is there a fuse for this? It’s really hard to find a station without numbers. Thx

The display may have failed but another possibility is that the related board circuits are defective.

Read full answer

Fisher Audio... • Answered on Dec 24, 2020

1 Answer

Have an RS- 939 Fisher stereo receiver that will not power on but have power to it.

1. Open internal fuse 2. Power supply failure

Read full answer

Fisher Audio... • Answered on Dec 23, 2020

1 Answer

Looking for manual for Fisher receiver RS-884

https://www.manualslib.com/manual/965777/Fisher-Rs-560.html You can also purchase copies of the service manual on ebay etc.

Read full answer

Fisher Audio... • Answered on Nov 09, 2019

1 Answer

I am looking for a belt and owners manual for Fisher turntable Model # MT-6310c

https://www.vintageshifi.com/repertoire-pdf/pdf/telecharge.php?pdf=Fisher-MT-6310-Owners-Manual.pdf FIXYA does not sell belts or manuals. Use https://www.google.com to search the internet to see who can sell you a belt, or purchase a used vintage model to use for the belt replacement.

Read full answer

Fisher Audio... • Answered on Oct 28, 2019

1 Answer

IS THERE A FUSE FOR THE SPEAKER JACKS IN A FISHER RS 939 RECIEVER?

Be the first to answer

Fisher Audio... • Posted on Oct 25, 2019

0 Answers

Is there any information at all about Fisher Model MT914a stereo turntable

I can offer no specific information other than to say the Brand suddenly appeared in just one store here in the late 1970s, a store that stocked only premium brands. It purported to be a premium product at relatively low prices - it wasn't a wide range and didn't sell well and disappeared in the early 1980s. I have a suspicion they might have been "label engineered" Sanyo products. Perhaps it was thought Fisher was a more acceptable name in western markets.

Read full answer

Fisher Audio... • Answered on Oct 14, 2019

1 Answer

I have a Fisher TAD-993 with the 24 disc carousel, it fails to eject the disc's. What can I do to fix?

Be the first to answer

Fisher Audio... • Posted on Sep 21, 2019

0 Answers

I have a Fisher stereo receiver model RS-9115 that is stuck on stand by i just pulled it out of storage after about 3 years

1. Hit the Stand-by or mute button. 2. Replace the batteries in remote, use remote to power down & up. 3. connect speakers 4. select FM, connect FM antenna, hit mute or stand-by button 5. Turn up volume, is there a buzz, hum or noise?

Read full answer

Fisher Audio... • Answered on Sep 04, 2019

1 Answer

Fisher sw7600 wiring diagram

Be the first to answer

Fisher Audio... • Posted on Aug 29, 2019

0 Answers

Owners manual

It is HIGHLY unlikely you will find one. Is there any specific action you would like to learn?

Read full answer

Fisher Audio... • Answered on Aug 18, 2019

1 Answer

Manual for fisher DAC 2403

Be the first to answer

Fisher Audio... • Posted on May 17, 2019

0 Answers

Can I hook up up fisher model rs 851 directly to hdtv

I think the best way to it will be to convert the RCA to HDMI, you can do it using a converter such as this one: https://www.aliexpress.com/item/kebidu-1m-Wholesale-1080p-HDMI-Male-to-RCA-Male-Adapter-Video-Audio-Cable-HDTV-VGA-AV/32846229440.html?spm=2114.search0104.3.1.9c7c53c9wfSwUE&ws_ab_test=searchweb0_0,searchweb201602_1_10065_10068_319_10059_10884_317_10887_10696_321_322_10084_453_10083_454_10103_10618_10307_537_536,searchweb201603_52,ppcSwitch_0&algo_expid=3f56e106-e8c5-48ad-9ea8-81e37dd3507d-0&algo_pvid=3f56e106-e8c5-48ad-9ea8-81e37dd3507d&transAbTest=ae803_3 In case this is for audio only, you need just connect the audio plugs

Read full answer

Fisher Audio... • Answered on May 01, 2019

1 Answer

I have a fisher RS-853 tuner/ amplifier. the tuner display is barely showing up, if not at all. it plays the radio fine, but doesn't display what station. HELP.

Hello The average guy, for what you comment, that you can not see what the display tells you, possibly it is because the lamps that illuminate from behind the display have burned If you have technical knowledge, you would have to replace the two lamps that fulfill that mission, respect the values of the lamps, but, go to a specialized technical service I enclose the Fisher RS883 service manual that is of similar characteristics I hope you can see the radio stations that you tune in Greetings Franco Dosil Hola The average guy, por lo que comentas, que no puedes ver lo que te indica el display, posiblemente se debe que se han quemado las lamparas que iluminan por detr?s al display Si tienes conocimientos t?cnicos, tendr?as que reemplazar las dos lamparas que cumplen esa misi?n, respeta los valores de las lamparas, sino, dir?gete a un servicio t?cnico especializado Te adjunto el manual de servicio del Fisher RS883 que es de caracter?sticas similares Espero que puedas ver las estaciones de radio que sintonizas Saludos Franco Dosil https://www.hifiengine.com/manual_library/fisher/rs-883.shtml

Read full answer

Fisher Audio... • Answered on Apr 26, 2019

1 Answer

Is Fisher Rs-1060 common ground or not. I am asking in order to understand whether i can use interconnect cable between my SDA 1C speakers together with Fisher Amp

Hello Derya, if the Fisher RS-1060 has common ground, the speaker negative is the same for all outputs Hola Derya, si el Fisher RS-1060, tiene tierra com?n, el negativo de parlante es el mismo para todas las salidas

Read full answer

Fisher Audio... • Answered on Apr 15, 2019

1 Answer