20 Most Recent Symphonic ST4813 13" TV - Page 8 Questions & Answers

Set up codes for Symphonic TV are: 0053 0189 0227 0456 0024

tried to press the tv/video button at the panel of the tv.

These are the setup codes for Symphonic TV. 0053 0189 0227 0456 0024

It is a parental control--programs that are violent or contain unwanted content can be blocked from viewing.

If your TV has a Menu button on its front panel, you can enter its menu options, surf through, and come to input selection window. Here you can select the inputs. If there is no such Menu button, you must have its remote control to select it.

What is the exact model number to your Symphonic?

Try this link to know more.

Check whether signals from Xbox is compactable to TV inputs. Check the inter connection cables.

Check picture settings.

Set the systmem selection control to "Auto"

For dish network 632,657,662,679,682,694,733,756,841,846.and here are some universal remote codes. 0572,0324,0225,0247

Hi Erica,Black box is a closed caption without a text. To resolve the issue, go to the menu, navigate to CC (closed caption), turned it off.Hope I helped you.Have a nice day!Jdvillanueva

Hi,

May I know the exact brand and model no. of your unit, it will help to determine where the fault came from.

Jdvillanueva

In most cases when the CD does not play it is possible that the optical head is a suspect. Sometimes it might pick up ordinary audio CD but will not play other formats. This indicates that the optical head is weak and so there is no detection or scanning of the CD . If the optical is working the tracks will be read immediately but with no scanning the laser head can be defective.

The main motor will not work in some cases as unless the tracks are read the drive motor will not work with signal from the processor. Also in some cases the central motor base can shift and so the distance to the disc can be more resulting in low detection. You can pull up the spindle to come closer. Sometimes certain cleaner disks will not be tracked to run for cleaning as it will not be read and so will reject. Hence it is ideal to manually clean the laser head eye using a cleaning swap /cotton bud with gentle pressure on the lens eye.If there is no result then watch if the CD spins or tries to spin. If so the board seems to work unless a test is taken on the main board but the possibility of a defective optical head can be the suspected fault.If any of the above seems otherwise we must recheck with possibilities of a malfunction of the main processor board

Thank you for using Fixya

If it is NOT high definition, you will need to buy a digital tuner for free over the air channels.