Kenmore 5-Cup Digital Coffee Maker - Page 5 - Answered Questions & Fixed issues
The piece that controls the water flow of my magic mill came off. Is that something that can be fixed?
Yes, if the piece that controls the water flow of your Magic Mill has come off, it is likely something that can be fixed. Here are a few steps you can take to address the issue:
1. Locate the missing piece: Try to locate the part that has come off and examine it closely. Determine if it can be reattached or if any components are broken or damaged. If the piece is intact and can be reinstalled, proceed to the next step.
2. Reattach the piece: Depending on the specific design of your Magic Mill and the part that controls the water flow, you may be able to reattach it manually. Look for any slots, grooves, or connection points where the piece should fit. Apply gentle pressure and try to secure it back in place. If there are screws or other fasteners involved, use the appropriate tools to reattach the part securely.
3. Contact the manufacturer or a professional: If you are unable to fix the issue on your own or if the piece is broken or missing, it's advisable to contact the manufacturer of your Magic Mill. They may be able to provide guidance, replacement parts, or direct you to authorized service centers. Alternatively, you can seek assistance from a professional appliance repair technician who is familiar with Magic Mill products.
Remember to exercise caution when working with electrical appliances. If you are unsure or uncomfortable with the repair process, it's best to consult a professional to ensure the proper functioning and safety of your Magic Mill.
I have a better chef, siphon coffee maker that will not heat the water
If your Better Chef siphon coffee maker is not heating the water and the timer buttons are on but nothing happens, there could be a few possible causes for this issue. Here are some troubleshooting steps you can try:
- Check the power supply: Ensure that the coffee maker is properly plugged into a working power outlet. Verify that the power outlet itself is functional by plugging in another device.
- Reset the coffee maker: Try resetting the coffee maker by turning off the power, unplugging it from the power source, and waiting for a few minutes. Then, plug it back in and turn it on again.
- Verify timer settings: Make sure that the timer settings are correctly set. Check the user manual for your specific model to ensure that you have set the timer correctly for the desired brewing time.
- Check the water level: Ensure that the water reservoir is filled to the appropriate level. Some coffee makers have a minimum water level requirement for proper operation.
- Clean the coffee maker: If the heating element or the water flow is obstructed by mineral deposits or other debris, it may prevent the water from heating. Clean the coffee maker as per the manufacturer's instructions, paying special attention to the heating element and water pathways.
- Contact customer support: If none of the above steps resolve the issue, it is recommended to reach out to Better Chef customer support for further assistance. They may be able to provide specific troubleshooting steps or advise on potential repairs or replacements.
Remember to always refer to the user manual provided with your coffee maker for model-specific instructions and safety guidelines.
What is the difference between sandblasting and shot blasting machine ?
1. the abrasive different: the sand blasting machine basically can use all material and shape, the shot blasting machine use metal material
2. the sand blasting usually by manual (also has automatic, to be more specific is half-automatic), the shot blasting machine is automatic
3. the sandblasting is wider applications, such as metal, wall, wood, ship etc. the shot blasting is mainly the metal and stone surface
4.... more please check www.shotblastech.com
I have a Siemens Surpresso S75. It asks me to
My Siemens Surpresso S75 had the same problem, it also gave a message to fill the pipe but when i hit the button water came out the nozzle. There is a water flow sensor inside the machine that was stuck so the machine thinks that it doesn't have any water in the pipe. The sensor i quite cheap, like 20$, but you have to take the whole machine apparat to get to the sensor, which is located near the water tank. Is a round white piece with two hoses and a couple of wires going into it. I ordered the sensor, but while i waited for it to arrive i was able to fix my old one by taking it appart and freeing up the stuck impeller inside.
Rancilio Classe 7 / can not program right-side buttons
Hello Olaf. If you are experiencing difficulties programming the right-side buttons on your Rancilio Classe 7 espresso machine, there are a few steps you can try to troubleshoot the issue:
1. Reset the Machine: Start by performing a full machine reset. Turn off the machine and unplug it from the power source. Wait for a few minutes before plugging it back in and turning it on again. This can sometimes resolve temporary glitches and restore the programming functionality.
2. Check Button Connections: Ensure that the buttons on the right side are properly connected and securely in place. If any of the buttons feel loose or have poor contact, it may prevent proper programming. Gently press each button to ensure they are seated correctly.
3. Clean the Buttons: Sometimes, dirt or debris can accumulate around the buttons, affecting their functionality. Clean the buttons on the right side using a soft, lint-free cloth and a mild cleaning solution. Ensure that the buttons are completely dry before attempting to program them again.
4. Firmware or Software Update: Check if there are any available firmware or software updates for your Rancilio Classe 7 espresso machine. Manufacturers occasionally release updates to address issues and improve functionality. Visit the Rancilio website or contact their customer support to inquire about any available updates for your specific model.
5. Contact Rancilio Support: If the above steps do not resolve the issue, it would be advisable to reach out to Rancilio's customer support directly. They will have detailed knowledge about your machine model and can provide specific troubleshooting steps or further assistance to resolve the programming issue with the right-side buttons.
Remember to refer to the user manual for your Rancilio Classe 7 espresso machine for any specific instructions on programming the buttons.
My BES 820 coffee machine on starting has only 2 lights flashing, the small hot water light and steam light.
All these home brew coffee machines are problematic in home use and this particular model was dropped from production, Try a power reset. Remove the mains plug for 5 minutes. Press and hold the Power button for 12 seconds, plug back in and continue to hold the power button for a further 12 seconds.
If that doesn't fix it, you will need a local Breville service centre to look at it with a view to installing a new control board f one is available.
Not finding what you are looking for?