20 Most Recent Konica Minolta PagePro 1300W Printer Questions & Answers


check your paper trays

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on Jul 02, 2016


Use the 64-bit Vistra driver

Konica Minolta... | Answered on Mar 11, 2016


Have konicaminolta service tech come and look at it.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Konica Minolta... | Answered on May 21, 2015


This seems to be a Konica Minolta all-in-one 1590MF, about which I know nothing, and not a PagePro 1300W. I've not been able to find a manual by Googling, and following the links on the left here led me to this site (below), but it's just a user guide and not technical. Best bet would be to Google on "Konica Minolta" and find the nearest supplier in your part of the world - they may be able to help.

http://www.fixya.com/support/p445351-konica_minolta_pagepro_1390mf_all_in_one/manual-29917

Konica Minolta... | Answered on Apr 18, 2014


1) Grab the front cover grip and
open the front cover

2) Pull the handle of the imaging
cartridge toward you, and then
pull out the imaging cartridge.
Note
Do not expose the imaging
cartridge to light for a long period
of time, otherwise decreased
image quality may result.

3) Pull out the jammed media along
the feeding direction.

Note
If media is jammed in the fusing unit,
pull the media downward to remove
it.
CAUTION:
The fusing unit is extremely hot.
Touching any part near the fusing
unit may result in burns.
Do not touch the image transfer
roller inside the printer, otherwise
decreased image quality may
result.

4) Align the imaging cartridge with
the guides in the printer, and
then insert the cartridge.
Note
Do not insert the imaging
cartridge at an angle or with
extreme force, otherwise the
printer may be damaged.

5) Press on the front cover grip and
close the front cover.

Konica Minolta... | Answered on Nov 23, 2013


Here is windows 7 64 bit driver:
http://onyxftp.mykonicaminolta.com/download/SearchResults.aspx?productid=979&osid=31

Worked for me perfectly

Konica Minolta... | Answered on Feb 16, 2013


hi, rollers cannot be cleaned , this could as well be a driver conflict , reinstall the software drivers and check the Konica website for updates.

Konica Minolta... | Answered on Mar 01, 2012


If your looking for Win7 64Bit driver you can check it here:

http://onyxftp.mykonicaminolta.com/DownloadFile/Download.ashx?fileid=26917&productid=979

For Win732 Bit, you may try:

http://www.konicaminolta.eu/business-solutions/support/download-center.html?product=100874&resulttype=drivers&legacy=0&optiondocuments=0&productgroup=2&page=1&targetOption=product

Konica Minolta... | Answered on Nov 19, 2011


Hi,
Konica Minolta PagePro 1300W is not compatible with Windows 7 64-bit.
According to the printer manufacturer's website the expected driver release date for Pagepro 1330W was July 2010. Check here.

Konica Minolta... | Answered on May 28, 2011


Despite initial appearances, Windows 7 supports this printer directly.
Click the launch (start) button, and go to devices and printers
add printer
local
Choose the port it's attached to
if the port isn't listed because the printer isn't hooked up, just choose LPT1 for now
Click on Konika Minolta and then click the WINDOWS UPDATE button ****IMPORTANT*** if you don't click Windows update, your printer will NOT be in the printers list.
there may now be 2 Konika Minolta listings on the left, choose the one that has more than 1 printer in it
The papgepro 1300W will now magically be in the list - choose it, and hit next
Follow the prompts and share the printer if you need to, or not if your computer is the only one using it, and on the screen after that, choose whether or not you want this printer to be the default printer
After the driver is installed, if you chose the right port already you can go ahead and print a test page.
If not, don't print a test page, and finish the installation, then plug in the printer - it should come up as new hardware, but now you have the driver for it and it should default to it during the installation.
You will now have 2 copies of the print driver if you didn't have the right port the first time, Either set the new driver as the default, or delete the first one you installed on LPT1: after the installation completes
If you just put the driver in for the right port, go ahead and print a test page.

You're done!

Konica Minolta... | Answered on Mar 28, 2011


Simply download the drivers for windows 7 and install the printer and your printer is ready to use.here is the link.

http://onyxftp.mykonicaminolta.com/download/Search.aspx

search your required window 7 drivers .

Konica Minolta... | Answered on Nov 16, 2010


try this one, www.mykonicaminolta.com

Konica Minolta... | Answered on Jun 19, 2010

Not finding what you are looking for?
Konica Minolta PagePro 1300W Printer Logo

38 questions posted

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6876 Answers

Adorjani Laszlo

Level 3 Expert

1316 Answers

carpediemweb

Level 1 Expert

51 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

PagePro Konica Minolta

  • PagePro Konica Minolta

Most Popular Question

driver konica minolta pagepro 1300w

  • Office Equipment & Supplies
Loading...