20 Most Recent Konica Minolta magicolor 5430 DL Laser Printer Questions & Answers

replace the yellow image unit

The second transfer roller is bad or missing or the clutch and solnoid are bad. also check the plastic cover that you have to pull down when replacing the transfer belt

on what model

Model number would help

Might be the senor that bottle acturates is bad or has toner on it!!! clean the sensor Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

replace yellow image unit Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

http://geiohio.com/remove-blank-page-konica-minolta

replace the magenta image unit Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Self Help Product Support Konica Minolta Business Solutions Inc try this site for drivers Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

no such thing use clean rag and or air, and for the hard stuff paper towel and windex Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

replace the drum Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Don't be conned out of your money by Konica or any salesmen. The waste bottle can easily be emptied. There is no sensor that 'gets tripped and can't be reset' this is bull*&%t. Just take the cartridge out. Go somewhere that you can dispose of the toner (make sure it's not windy !) then turn it to the 'locked' position. This opens the port, then just shake the thing back and forth for a few minutes. You can feel getting lighter. Then turn back to unlocked. Use a vacuum to remove toner from outside of cover, then a soft cloth or wipes to get it clean. Then put it back in.

make sure that you specify the same paper size in the print dialogue window - i.e., in MSWord go file - print - properties - and make sure paper size in the dialogue box matches media type in printer tray

AS for toner use OEM not third party.replace them. as for the paper draw check the sensor and tab that accurate the sensor telling the machine the draw is closed. might be broken or the sensor got hit when you re-installed the roller. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Replace the fuser unit and the transfer belt you sad they where at the end of their life try this site for parts as a start Precision Roller Printer Toner Cartridges Parts and Supplies Office... Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

might clean the LASER slit glasses for each color Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

to what?????????????????? Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

for which code Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

located at a secure Konica Minolta web site seem that Konica Minolta protects their Copier/printer firmware, available to only Konica Minolta dealerships and KMBS, need a tech Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

fuser error replace the fuser Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f