20 Most Recent
Konica Minolta magicolor 2430 DL Laser Printer - Page 9 Questions & Answers
In Konica Minolta 2430dk, I had a media jam in the
The only solution is to take the fuser unit out of the printer, then you may be able to manually rotate the rollers to clear the jam. If there are any marks or scratches on the fuser rollers, you will need to replace the fuser unit, or you will get marks on your prints
Konical Minolta 2430 dl Streaking
Try cleaning the rollers. Directions can be found starting on page 83 "Maintaining the printer" here:
http://www.kn.nl/data/handleiding/174952/user%20guide_engels.pdf
Media jam "fuser'
You need to clear any paper that is jammed inside. Then if you get the message after you clear the paper, check to see if it is a fuser problem.
Fuser problem:
start a print from tray 1/manual feed and just as the trailing edge of paper is entering the machine; quickly open it to stop print and take out the cartridge and look at it's drum and the paper underneath. If the issue is there at that point then it would point to the cartridge. if not then the fuser.
Here is the user guide, info is on page 89.
http://www.kn.nl/data/handleiding/174952/user%20guide_engels.pdf
Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe
I’m happy to assist further over the phone at
https://www.6ya.com/expert/joe_8b8c2cd6ce148309
I have a Konica Magicoloe
If your not mechanically incline don't bother to replace. To replace the fuser unit remove transfer belt,back cover,left side cover, two fuser connectors(left side) sensor connector on back. Then remove two screws on top which hold the fuser in place. Then remove fuser very carefully.
Konica Minolta magicolor 2430DLshowing Fatal o8h
Error 08 relates to the main motor having problems turning. Quite often this is caused by a faulty consumable (opc,toner or transfer belt). Could also be that the lid is not closing properly and stopping the toner carousel turning freely.
Not finding what you are looking for?