20 Most Recent
- Page 2 Questions & Answers
There are 3 solenoids that can cause this. Two of them are easy to get to and the third is in the back behind the circuit board. Here is a link that will show you how to fix it. There is one under the fan.
on Feb 06, 2013
How to reset the toner counter chip?
a small pcb on the cartridge contains a serial chip that counts.
it can't be reset. Minolta probably calls it a MONEY chip as it forces u to replace the cartridge before u need to. u can buy new pcbs and replace it but it is probably not worth it unless u refill ur own.
on Sep 16, 2012
I just replaced the C, M, Y toner cartridges and
Welcome to FixYa.
Here's how to do it:
- Check if the paper is loaded properly and the paper guide is fitted with the paper.
- Clean the media feed rollers by wiping them with a soft, dry cloth.
After cleaning the rollers, put back the drum cartridge. Make sure it is properly installed then close the printer properly. Then print a test page again.
Keep me posted.
on Aug 08, 2011
14: 2nd image transfer pressure/retraction failure
Relevant Electrical Parts
Retraction Position Sensor /2nd Image Transfer
Pressure/Retraction Solenoid /2nd Image Transfer
open cover, remove image transfer unit, behind ITU is 2nd image transfer roller, move it with hand, check solenoid and sensors, thaht they moving freely.
on Aug 04, 2011
Not finding what you are looking for?