Minolta magicolor 2200 EN Laser Printer - Answered Questions & Fixed issues

0helpful
1answer

Qms 2200 paper mismatch error

Initial Thoughts The problem seems to be a fault in a paper feed sensor. This would explain the size mismatch, since these sensors are how the printer detects the paper size. And, it would explain why printing starts two-thirds down the page, since these sensors are also used in timing where on the page to start printing. However, a document passes through three software applications before it actually prints. And, any one of them could be causing the paper size mismatch. Insight Although paper sensors are usually low-tech and easy to remedy, they are often difficult to find and can sometimes be difficult to get to. Most such sensors are simple switches (toggles) and others are optical sensors that work like the electric eye of a garage door opening system. And, the solution may be as simple as a tiny piece of paper stuck on one of them. However, sensors such as these are quite numerous on this printer and can be hidden anywhere. The three software applications I referred to are:

1. The document rendering application, such as Adobe Reader, Microsoft Word, etc.

2. The print writer. This is part of the device driver software package. It breaks up a print request and converts it to a standard format that the printer will always recognize and manages transmission of each page to the system spooler or directly to the printer.

3. The printer firmware. I'm not sure of everything this does related to the print stream. But, part of it must manage resources, such as ensuring the right size paper is being fed.

5/16/2011 8:10:31 PM • Minolta... • Answered on May 16, 2011 • 533 views
0helpful
1answer

My Magicolor 2200 ghosts in color and in black.

This is a symptom of a well-used transfer belt. Replacing it should do the trick.

To verify: Check the transfer belt. The transfer belt is the large replaceable unit close to the center of the printer. It should have excess toner clinging to it. Don't bother trying to clean it off. It will just return the next time you print.

I'm currently looking for a way to squeeze a little more life out of it. But, am having no luck so far.
3/15/2011 12:33:36 AM • Minolta... • Answered on Mar 15, 2011 • 197 views
0helpful
1answer

Download toolbox 940c

For what model sir/mam? Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
2/8/2015 4:31:46 AM • Minolta... • Answered on Feb 08, 2015 • 35 views
0helpful
1answer

Pagemaker 7 0

Are all of the image unit and color toner Minolta/QMS (OEM) not third party. Does the machine print the demo page OK? Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
2/4/2015 11:03:24 PM • Minolta... • Answered on Feb 04, 2015 • 44 views
0helpful
1answer

Konica minolta magicolor 8650

What about the machine showing a code or image problem you did not state the problem when you submitted the question. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
2/4/2015 10:55:31 PM • Minolta... • Answered on Feb 04, 2015 • 72 views
0helpful
1answer

Konica minolta printer problems

What model and code is it displaying Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
1/23/2015 12:47:20 AM • Minolta... • Answered on Jan 23, 2015 • 34 views
0helpful
1answer

Printer is printing all the pages on top of each other

What is the model and what is make? Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
1/22/2015 11:23:38 PM • Minolta... • Answered on Jan 22, 2015 • 23 views
0helpful
1answer

Paper size error on 1690mf

Machine mite be set for metric paper and computer printing in inch Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
12/29/2014 10:38:04 PM • Minolta... • Answered on Dec 29, 2014 • 147 views
0helpful
1answer

The machine not working sowing please wait only

Trennen Sie beim Start externe Laufwerke, Peripherieger?te usw., warten Sie einige Minuten und schalten Sie Ihr System mit Kamagrabest ein. Jetzt fahren Sie Ihren Computer dreimal hintereinander kaum herunter und dann wieder ein. Befolgen Sie diese Schritte Kamagra Bestellen https://kamagrabest.net/, indem Sie zuerst den Computer einschalten und dann direkt den Netzschalter erneut dr?cken, aber diesmal gedr?ckt halten.
9/24/2021 6:46:14 AM • Minolta Office... • Answered on Sep 24, 2021 • 24 views
0helpful
1answer

Konika minolta c554e error code C-3102. HOW DO YOU FIX THIS.

1 Check the fusing unit for proper installation and correct as necessary.
2 Check the connector between M3-PRCB CN2 for proper connection and correct as necessary.
3 Check the connector of M3 for proper drive coupling and correct as necessary.
4 PS37 I/O check, sensor check.
5 M3 operation check PRCB CN2-9 (REM) PRCB CN2-12 (LOCK) bizhub C554 22-J bizhub C454 21-J.
6. Replace M3.
7. Replace the fusing unit.
8. Replace PRCB.
9/4/2020 10:28:41 AM • Minolta Office... • Answered on Sep 04, 2020 • 320 views
0helpful
2answers

How to fix Error Code C3901 on a Minolta Bizhub 420 copier

FIRST, if this code comes back. Have a technician look at it DO NOT CONTINUE TO RESET the code!!!! AS this is for the Hot Part called the FUSER. It can catch on fire! And that will ruin a perfectly good day!!!! 1. Turn OFF the main power switch. Inside machine, leave sub-power switch on (Right side of control panel) 2. Turn main power switch ON while pressing the Utility/Counter key. 3. Touch [Trouble Reset]. 4. Check to make sure that [OK] is displayed and then it has been reset. 5. After turning off the main power switch, turn it on again more than 10 seconds after and check if the machine starts correctly. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
8/23/2020 3:14:47 PM • Minolta Office... • Answered on Aug 23, 2020 • 201 views
0helpful
1answer

How clear error message c2558 konika minolta bizhub 206

Check the drum and developer units
3/28/2020 7:10:04 PM • Minolta Office... • Answered on Mar 28, 2020 • 873 views
0helpful
1answer

Conica minolta c7000, erro c-2452

Magenta developer unit and or motor has the developer for the Magenta been replaced was it done properly? Was developer unit replace?????
3/28/2020 7:09:28 PM • Minolta Office... • Answered on Mar 28, 2020 • 197 views
0helpful
1answer

SIR KONIKA MINOLTA 165E PROBLEM C2558

Replace the drum and developer units
3/28/2020 7:01:56 PM • Minolta Office... • Answered on Mar 28, 2020 • 131 views
0helpful
1answer

HOW TO CHOOSE PAPER TRAY ON MINOLTA cs pro ep 2050

You can copy from the bypass tray but not print. Go to the paper select and select bypass tray ensure paper is properly oriented.
3/28/2020 7:01:30 PM • Minolta Office... • Answered on Mar 28, 2020 • 84 views
0helpful
1answer

What is soloution that after printing page automatically ink toner feed as per requirement.konica minolta 751 mODEL

The developer has not been changed and needs to changed. The drum also need to be replaced.
3/28/2020 6:59:35 PM • Minolta Office... • Answered on Mar 28, 2020 • 69 views
0helpful
1answer

Minolta 2400W Wont try to feed paper.

IT is 16year old today, and there are no spare parts, for it. cept used on ebay. the blinking lights in the manual mean, toner cartridge dead or fake one installed. on page 11. if got it to work there are no windows 10 drivers, now. XP yes. see that page 11 states on errors. https://www.manualslib.com/manual/90066/Konica-Minolta-Magicolor-2400w.html?page=11#manual the service manual is here, https://www.manualslib.com/manual/805991/Konica-Minolta-Magicolor-2400w.html RTM?
3/4/2020 12:32:39 PM • Minolta Office... • Answered on Mar 04, 2020 • 77 views
0helpful
1answer

HOW DO I SOLVE THIS ERROR CODE COF E8 IN MINOLTA EP 2030

Replace the drum and developer if it can be found and run the correct service procedure
2/17/2020 12:47:20 AM • Minolta Office... • Answered on Feb 17, 2020 • 88 views
0helpful
1answer

Konical minolta bizhub 601 schedule inspection device

Yes what about it????
2/17/2020 12:45:07 AM • Minolta Office... • Answered on Feb 17, 2020 • 94 views
Not finding what you are looking for?
Minolta magicolor 2200 EN Laser Printer Logo

3 questions posted

Ask a Question

Usually answered in minutes!

Top Minolta Office Equipment & Supplies Experts

Daniel Blask
Daniel Blask

Level 2 Expert

172 Answers

Mehandi Husain ...

Level 3 Expert

1495 Answers

George Mclaughlin

Level 2 Expert

370 Answers

Are you a Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...