20 Most Recent Minolta magicolor 2200 EN Laser Printer - Page 4 Questions & Answers

0helpful
1answer

I have a problem in my konika minolta 195 in the screen it appeared maintenance call (M2)

Replace the drum and developer
9/2/2018 9:18:07 PM • Minolta Office... • Answered on Sep 02, 2018
0helpful
1answer
0helpful
1answer

What is the cause of konika minolta di2510 printing pure black

The charge corona housing in the image unit replace it with a new one. Its the assy with the two blue/green hooks on the right side of the machine when you open the right side door
9/2/2018 9:15:49 PM • Minolta Office... • Answered on Sep 02, 2018
0helpful
1answer

Konika minolta pagepro 1580mf uneble to print EF

Is that a code EF????
9/2/2018 9:14:21 PM • Minolta Office... • Answered on Sep 02, 2018
0helpful
1answer

MY MINOLTA 7115 JUST KEEPS ON SHOWING ERROR CODE C0F32 PLEASE WHAT SHOULD I DO?

Sir/Mam, Replace the developer. If that does not work replace the ATDC sensor located under the image unit/developer section. The sensor has a multi-color ribbon cable attached to it. If not that then the main control board is bad. If you can find one!!! Best bet would be to replace the developer and ensure you clear the counters for the developer and run the required 36 Mode process after replacing the developer. DO NOT USE A VACUUM CLEANER to replace the developer because the static electricity from the vacuum cleaner can destroy the sensor. Also the copier uses the counters to adjust voltages for certain assemblies. So if you replace the developer and don't clear the counters then the machine will adjust voltages for a used drum or developer when in reality the developer or the drum are new. Causing image problems and codes.
9/2/2018 9:13:29 PM • Minolta Office... • Answered on Sep 02, 2018
0helpful
1answer

C0F32 Minolta bizhub 210 and 211 Please help me about this code error

Sir/Mam, Replace the developer. If that does not work replace the ATDC sensor located under the image unit/developer section. The sensor has a multi-color ribbon cable attached to it. If not that then the main control board is bad. If you can find one!!! Best bet would be to replace the developer and ensure you clear the counters for the developer and run the required F8 process after replacing the developer. DO NOT USE A VACCUM CLEANER to replace the developer because the static electricity from the vacuum cleaner can destroy the sensor. Also the copier uses the counters to adjust voltages for certain assemblies. So if you replace the developer and don't clear the counters then the machine will adjust voltages for a used drum or developer when in reality the developer or the drum are new. Causing image problems and codes.
9/2/2018 9:11:17 PM • Minolta Office... • Answered on Sep 02, 2018
0helpful
1answer

Minolta copier 6001 code C004A

Cooling fan for the Orginal glass. Check the fan for the big glass under the document feeder. Might be bad
9/2/2018 9:09:02 PM • Minolta Office... • Answered on Sep 02, 2018
0helpful
1answer

Print unable 72 ky? hai pls jaldi bataye.konika minolta 1590 mf .or ise kaisi thk kiya jata hai

Check that no paper is jammed in printer
8/31/2018 11:02:30 AM • Minolta Office... • Answered on Aug 31, 2018
0helpful
1answer

Handbook minolta di183

8/16/2018 9:45:51 AM • Minolta Office... • Answered on Aug 16, 2018
0helpful
5answers

Konica minolta bizhub 215 showing maintenance call(m2) and service call

Utility-stop-0-0-stop-0-1 for service mode. choose clear data, then supply count then ok to clear. On/ Off the machine it will work as usual.
6/19/2018 10:26:35 AM • Minolta Office... • Answered on Jun 19, 2018
0helpful
1answer

My Konical Minolta c353 showing misfeed remove indicated by 0, pls what is the possible solution

sir/Mam Which draw are you using ? Try a different one or the bypass tray. The rollers need to be replaced Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
5/13/2018 7:57:19 PM • Minolta Office... • Answered on May 13, 2018
0helpful
1answer

How to clear c2A04 in Minolta 203

Are you using third party toner???? replace the black toner with OEM Konicaminolta toner Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
5/13/2018 7:54:05 PM • Minolta Office... • Answered on May 13, 2018
0helpful
1answer

Bizhub 6501 does not recognize finisher FS607

Do you have the RU section also? which is use between the finisher and the copier. Mite also want to have a tech come out and update the firmware the copier OS. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
5/13/2018 7:51:17 PM • Minolta Office... • Answered on May 13, 2018
0helpful
1answer

I have a Konika Minolta bizhub 211, If I want to photocopy with it, it is pouring some ink on the paper as it is printing. so what can be the solution to this problem please. I need an answer

mite want to have it cleaned. Have a tech look at it mite need to have the drum and developer replaced. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
5/13/2018 7:45:58 PM • Minolta Office... • Answered on May 13, 2018
0helpful
1answer

How 2 solve check printer mode by bypass in konika minolta bizhub 215 & incorrect paper size A4

set the paper bypass tray to the size of the check mite need to be customize measure the checks and tell the copier the size its x and y size A4 is same as letter size except its for the rest of world USA is letter and the rest is A4. A3 is 11x17. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
5/13/2018 7:44:40 PM • Minolta Office... • Answered on May 13, 2018
0helpful
1answer

I have a Konika Minolta bizhub 211, If I want to photocopy with it, it is pouring some ink on the paper as it is printing. so what can be the solution to this problem please. I need an answer

Hello,

It's possible to be warn developer (i need to know how many copies are developer) or image unit is leaking. If i see a paper printed by the copier, i can do more accurate answer. You can call a service center.

5/1/2018 3:43:44 PM • Minolta Office... • Answered on May 01, 2018
0helpful
1answer

I Have a Konika Minolta bizhub 211. I had been trying this solution for repairing m2 call. but the code is appear till now. anyone help me. please give me solution step by step. Thanks

Yes go to service mode and clear the counter. The counter is set up to replace the drum and developer. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
5/1/2018 2:27:13 PM • Minolta Office... • Answered on May 01, 2018
Not finding what you are looking for?
Minolta magicolor 2200 EN Laser Printer Logo

3 questions posted

Ask a Question

Usually answered in minutes!

Top Minolta Office Equipment & Supplies Experts

Daniel Blask
Daniel Blask

Level 2 Expert

172 Answers

Mehandi Husain ...

Level 3 Expert

1495 Answers

George Mclaughlin

Level 2 Expert

370 Answers

Are you a Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Magicolor Minolta

  • Magicolor Minolta

Most Popular Question

magicolor 2200 ghosts in color in black

  • Office Equipment & Supplies
Loading...