20 Most Recent KitchenAid Architect II Superba EQ Series KUDE20FB - Page 9 Questions & Answers


Errorcode FIEI

Be the first to answer 12/17/2011 10:55:34 PM • KitchenAid Ovens • Posted on Dec 17, 2011Be the first to answer

Digital display fading GE JTP45

HelloYou will need to replace the digital display, it will be part of the control circuit board if it is a typical design. Without specific make and model information that is about as much information as i can offer.
12/15/2011 12:14:10 AM • KitchenAid Ovens • Answered on Dec 15, 2011

KitchenAid part no longer available(?)

Hi I look several parts places and it is N/A sorry it must be old like me ha ha
12/4/2011 5:04:14 PM • KitchenAid Ovens • Answered on Dec 04, 2011

My double oven is flashing code F6 and E2

Error Code F6-E2 means that your oven temperature sensor has failed as well your electronic control board.The oven temp sensor, electronic control board and the touchpad must be replaced. Before you decide what to do, check the thermal fuse at the control panel first. If blown, replace it and the temp sensor. If you are lucky the control board may still be good.Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.Thank you for using Fixya, and have a nice day.
11/23/2011 6:11:16 PM • KitchenAid Ovens • Answered on Nov 23, 2011

My computer is reading check probe or put probe temperture in

Hello there and welcome to fixya These oven probes are notorious for going out after a given time or if they get a lot of grease on them they will give false readings so what i would do is first unplug the oven then remove the probe from the oven and clean the connections with a degreaser then rinse and let dry then let dry then cleatn the entire probe and reassemble and plug in the oven again and if you stil get the message then you will want to replace the probe or have the wiring that it connects too checked with a meter to see if it is reading the proper ohms a high ohms reading will mean that it is bad okHope this helps and i can send you more info on the repair if needed also if you have a warranty you may be able to use it and get it repaired for free ok? best regards Mike
11/16/2011 7:57:47 PM • KitchenAid Ovens • Answered on Nov 16, 2011

Nothing happen what should i do now? i try to

If your oven is displaying the F2 E1 error code, then the problem is probably NOT just that the CONTROL LOCK feature on the oven was engaged. The F2 E1 error is probably an indication of an electrical fault inside the electronic control system for the oven.Sometimes this is simply a temporary error in the control panel circuitry which can be cleared by shutting off the electrical power supply to the oven for a minute or so at the breaker box.Other times this is caused by a loose wire or faulty connection inside the control panel, or it is simply a faulty control panel circuit board.Try switching off the electrical power to the oven using the corresponding breaker at the main fuse panel in your home. When you switch the power back on after a minute or so, press the CANCEL button on the oven controls panel.If the above procedures do not work then you will likely need to contact a local service technician to disassemble the oven, diagnose the cause, and repair the problem.If your oven is new, be sure to contact your dealer at the place of purchase since the cost of the repair may be covered under the terms of your warranty.Good luck.Joe.
11/3/2011 11:53:58 PM • KitchenAid Ovens • Answered on Nov 03, 2011

I want a manual for a kitchen aid convection

Hello Inna,Here is the link to that users manual https://www.whirlpool.com/digitalassets/MLPDF/User%20Instructions%20-%20W10170438A.pdfyou can click on it to download itGENE
11/3/2011 2:32:01 PM • KitchenAid Ovens • Answered on Nov 03, 2011

I want a manual for

In the above site you can get all the KitchenAid oven manuals.
Check for the model and choose the your model.Most of the series KitchenAid oven have same manual.The KitchenAid has same manual for all KitchenAid series.


Here choose the First ? 3 4 5 6 7 ? Last accordingly to check your manual.


post a comment for further assistance.
Thank you for using fixya have a nice day:-)
10/21/2011 12:27:01 AM • KitchenAid Ovens • Answered on Oct 21, 2011

My Kitchenaid oven display has gone out. When I

Hello & Welcome to FixYa

The problem is with the control board that needs replacement. Please get back to me if you have any other questions.


10/7/2011 2:06:14 AM • KitchenAid Ovens • Answered on Oct 07, 2011

Just got error code "fe02"


The F2-E0 error code means that the computer thinks a button on the touchpad is stuck. Sometimes this can be resolved by making sure the touchpad connector fits tight into the control board. The F2-E0 code can be cleared by pushing CANCEL/OFF. If it returns the touchpad needs to be replaced . GENE
9/18/2011 6:24:56 PM • KitchenAid Ovens • Answered on Sep 18, 2011
Not finding what you are looking for?
KitchenAid Architect II Superba EQ Series KUDE20FB Logo

4 questions posted

Ask a Question

Usually answered in minutes!

Top KitchenAid Ovens Experts


Level 3 Expert

85241 Answers

Cindy Wells

Level 3 Expert

6589 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22509 Answers

Are you a KitchenAid Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

KitchenAid Ovens

  • KitchenAid Ovens

Most Popular Question

kitchenaid superba gas oven cooktop

  • Ovens