sir,
Does it copy only in black? does it print only in black, could be set to default to black what does the copier screen say if you touch reset button does do to color or black and white? Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
does it copy only in black? does it print only in black, could be set to default to black what does the copier screen say if you touch reset button does do to color or black and white? Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
replace the developer and the drum and run the required F codes F8, 7 and F5 clear the counters also Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
open the front door with power on in the upper left you should see a small panel remove the cover, press the small switch wait for ready to copy, if the code comes back do not reset the FUSER is bad it can start a FIRE ruining a perfectly good day!!!!! Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
It is secure web site Konicaminolta is not going allow people to down load their copier operating software, have a tech come install the soft ware Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
replace the transfer wires they are located under the drum the paper goes above them these wires get HV placed on them when the paper come over them they bring the image to the paper Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
Check tray 2. Open the 2 draw check that there is no paper behind it. Also do not store paper in the 2 tray on the left side that extra space is for 11x 17 paper is you where using it. if not those two mite be the draw motor that raises the paper or the board controlling it Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f