Rangemaster Broan 614804 BALLISTA 48IN HOOD1 BRAND IN STOCK - Page 8 - Answered Questions & Fixed issues
How to replace a surface burner ignighter on my Jen-Air Gas Convection Range JGRP536.
Replacing a surface burner igniter on a Jen-Air Gas Convection Range JGRP536 can be done by following these steps:
- Turn off the gas supply to the range.
- Lift up the cooktop and locate the igniter that needs to be replaced.
- Remove the screws that secure the igniter bracket to the burner assembly.
- Carefully lift the igniter bracket off the burner assembly and disconnect the wires from the igniter.
- Remove the old igniter from the bracket and discard it.
- Install the new igniter onto the bracket and connect the wires to the new igniter.
- Reinstall the igniter bracket onto the burner assembly and secure it with the screws.
- Lower the cooktop back into place.
- Turn the gas supply back on and test the new igniter to make sure it is functioning properly.
Note: It is important to make sure the replacement igniter matches the specifications of the original igniter for proper function and safety. If you are not comfortable with performing this task, it is recommended to seek the assistance of a qualified technician.
2/23/2023 11:23:13 AM •
Kitchen Ranges
•
Answered
on Feb 23, 2023
•
63 views
Temperature keeps dropping and takes too long to heat back up ,constantly and taking product longer to cook
If your oven temperature keeps dropping and takes too long to heat back up, it could indicate a problem with your oven's heating system. Here are a few things you can check:
- Check the oven's heating elements: If one of the heating elements in your oven is faulty, it may cause the oven temperature to drop. Turn off the oven, unplug it, and visually inspect the heating elements. If you see any signs of damage, such as cracks or breaks, the element may need to be replaced.
- Check the oven's thermostat: A faulty thermostat can also cause your oven to drop in temperature. You can use an oven thermometer to test the accuracy of your oven's thermostat. Simply place the thermometer inside the oven, set the oven to a specific temperature, and wait for it to heat up. Check the thermometer to see if it matches the oven's temperature setting. If it doesn't, the thermostat may need to be replaced.
- Check the oven's door seal: A damaged or worn door seal can cause heat to escape from the oven, which can result in a drop in temperature. Inspect the door seal for any cracks, breaks, or other damage. If you notice any issues, replace the seal.
- Check the oven's control board: If the above steps do not resolve the issue, it could be a problem with the oven's control board. Consult a professional technician to diagnose and repair the issue.
2/23/2023 11:21:18 AM •
Kitchen Ranges
•
Answered
on Feb 23, 2023
•
46 views
How to Replace switch and circuit board brown model 88,000-c
Replacing a switch and circuit board on a Broan vent hood model 88,000-c requires some electrical knowledge and experience. If you are not comfortable working with electricity, it is recommended that you hire a licensed electrician to perform the replacement.
Here are the general steps for replacing the switch and circuit board on your Broan vent hood:
- Turn off the power to the vent hood. You can do this by turning off the circuit breaker or unplugging the vent hood.
- Remove the cover of the vent hood. This usually involves removing screws or clips that hold the cover in place.
- Locate the switch and circuit board. The switch and circuit board are typically located near the control panel on the vent hood.
- Disconnect the wiring from the old switch and circuit board. Take note of which wires go where, so you can reconnect them to the new switch and circuit board.
- Remove the old switch and circuit board from the vent hood.
- Install the new switch and circuit board in the same location as the old ones.
- Reconnect the wiring to the new switch and circuit board. Make sure to connect the wires to the correct terminals.
- Replace the cover of the vent hood.
- Turn the power back on to the vent hood and test the new switch and circuit board to ensure that they are working properly.
If you encounter any difficulties during the process, it is best to stop and seek assistance from a professional. Safety is a top priority when working with electrical systems, and it is important to take proper precautions to avoid injury or damage to your home.
2/15/2023 3:48:24 AM •
Kitchen Ranges
•
Answered
on Feb 15, 2023
•
44 views
CDA cooker hood ECP72BL motor stopped working, lights work fine
If the motor of your CDA cooker hood has stopped working, but the lights are functioning properly, it could be due to a faulty motor or a problem with the motor capacitor. Another possible cause could be a broken wire or a loose connection in the motor circuit. It's recommended to have a professional inspect and repair the cooker hood to ensure safe and proper operation.
2/14/2023 3:17:38 AM •
Kitchen Ranges
•
Answered
on Feb 14, 2023
•
150 views
How do I use the Scentsy temp burner on my p7 stove
The Scentsy temp burner is not designed to be used on a stove. Scentsy warmers use a heating element to melt scented wax, not an open flame. Using the Scentsy temp burner on a stove or any other heat source with an open flame could be dangerous and is not recommended. If you're having trouble using your Scentsy warmer, I recommend consulting the manufacturer's instructions or contacting Scentsy customer support for assistance.
2/13/2023 12:24:09 PM •
Kitchen Ranges
•
Answered
on Feb 13, 2023
•
24 views
Jennaire gas range, down draft fan jds9865bdp
The Jenn-Air JDS9865BDP is a gas range with a downdraft ventilation system. The downdraft fan pulls smoke and cooking odors down and out of the kitchen, eliminating the need for a hood and providing a sleek, integrated look in the kitchen.
1/31/2023 12:19:34 PM •
Kitchen Ranges
•
Answered
on Jan 31, 2023
•
45 views
I need manual for broan range hood with light &fan
If you need a manual for your Broan range hood with light and fan, you can find it online. You can search for the specific model number to find the correct manual for your range hood. You can also contact the manufacturer directly to inquire about purchasing a replacement manual.
1/29/2023 7:20:44 AM •
Kitchen Ranges
•
Answered
on Jan 29, 2023
•
111 views
My Beko HLG Victorina oven will light with the ignition, but the flame stays in heating mode and doesn't settle to a temperature.
The issue you are describing with your Beko HLG Victorina oven may be caused by a problem with the oven's thermostat or gas valve. The thermostat controls the temperature of the oven and tells the gas valve when to open or close in order to regulate the flame.
To troubleshoot this problem, you can try the following:
- Check the thermostat setting to ensure it is set correctly. If the setting is too low, the flame may not be able to reach the desired temperature.
- Check the oven's temperature sensor to ensure it is working properly. A faulty temperature sensor can cause the oven to overheat or not heat up at all.
- Check the gas valve to ensure it is working properly. A faulty gas valve may not be able to regulate the flame correctly.
- Check the ignition system, including the spark plug and ignition module, to ensure they are working properly. A faulty ignition system can prevent the flame from staying lit.
- If the problem persists, it is recommended to consult a professional technician to check the oven, or contact the Beko customer service for assistance.
It is important to note that these instructions may vary depending on the oven model, so it is best to consult the user manual for specific instructions
1/20/2023 2:25:18 PM •
Kitchen Ranges
•
Answered
on Jan 20, 2023
•
40 views
Not finding what you are looking for?