20 Most Recent Pioneer AVH-P6500DVD Car DVD Player - Page 3 Questions & Answers

the problem is with your laser pick up unit. Its a reading error. take it to a repair shop or go to ebay and look up repair tech city. They fixed mine and it worked well after that.

what you need is called a flex ribbon for the unit. Its a cable of flat wires that will be attached from the screen to the head unit.
you can find them on Ebay for like $60 or $70 but that will fix the problem with it. I had that same problem with my AVH-6500dvd and bought the flex ribbon and then I installed it myself but it was not a simple task to do. I would recomend taking it somewhere to get fixed.

NEED TO REPLACE THE FLEXIBLE CABLE THAT GOES FROM THE MAIN UNIT TO THE SCREEN.

mandalo a un taller para que te le limpien el lazer y si no trabaja vas a tener que remplazar el laser.este es mi correo por si tienes dudas ([email protected])

when you bought this did you just get the in-dash unit or did it come with a brain unit as well .........if it was just the in-dash player you need to buy a brain unit to control bass & treble and other features for this unit when pioneer sold this the dash unit sold for$495.00 but the brain unit cost $599.00 it was a price grabber cause they wouldn't tell you it needs a brain unit (the actual full unit sold for $1200.00 brain/dash) yet it works with other pioneer in-dash units the person you bought from probably upgraded to the avhp-7500DVD and kept the brain unit from the one he sold you but good news its a few years old so i would checkout eBay for the brain unit
hope this answered your problem good luck

if you are popping fuses you must ground all the black wires to metal in the car sounds like the ground is carrying a positive charge .......you must also check the 10amp radio fuse located in the panels of the car mostly located in-dash panel by the door ........hope i helped

i do not no the answer to your question but i have the brain for the 6500. if you interested email me and i will sell it to you. thanks corey

[email protected]

If your car stero has a stereo audio input connector then you can plug a cable in the headphone on the IPod and the other end of the cable into the stereo audio input on the car stereo.
If you don't have an stereo input on the car stereo then you can buy a FM transmitter that is powered by the car's cigarette socket, connect the IPod to the transmitter, switch on the car radio and tune it to the FM station that matches the FM transmitter.
You can now listen to your IPod from the car radio.

Hi. I believe you you can as long as the connector for the data cable is the same on the brain that you want to upgrade to. Good luck.

Sorry to give bad news, but you do need the brain to turn it on. How ever I do have one for sell if you want it. Call me if you are interested. My cell#801-414-4566. Hogan.

Have you had your fuel filter changed? If it is clogged it will take more pressure to operate properly so when you give it gas and it runs better might be an indication it needs to be changed. If you are getting too much gas might be flooding and the computer needs to be checked. But when you said it runs better when you give it gas I would think fuel filter.

crankshaft sensor most prob cause - coil pack would normally give misfire symptons as well.

avic411.com search for bypass

Try pressing the reset button on the front of the unit, you will need a pen to get at the button.

what steps have you gone through to test it are you just going of it installed in your car if so take it out and connect the red and yellow wire and put it to + on a battery and the black to - if it still dosnt come on does it make a clicking noise does the fan spin on the back

there are so many reasons as to why it dosnt work but you need to bench test it out of the car there is a fuse in the wiring it could be that the supressor is faulty you need a car battery if you get it working then the fault is in your car a blown fuse or something

let me know the exact problem once bench tested if the screen comes out or in but no lights or the unit is tottaly dead or what

email me on [email protected]

you need a hideaway unit for amps etc


is the stereo uk or *** product where are you if you have bought it from another country it could be that your on a different frequency
if you need help tuning the board into your area email me [email protected] and ill send you detailed instruction hpow to do it really easy

go on the internet and put the model number in and put service manual infact ill get you the part number

the part your looking for are these

there are 4 cogs 2 the same size then a big cog and middle size

the 2 small cogs are 546-9954
the middle cog is 2416-9855
the big cog is 444-0097


all can be purchased at www.seme.co.uk you need to be company but i get stuff from there and just tell them you have a buisness i use blackpool car audio lol

press the reset buton to make the screen problem rectify itself
you need a hideaway unit for adding subs

take a closer look at the ribbon connector. it sounds like a problem with connection that is why it is not responding. it could probably have thin film of protective cover on the contacts that you need to remove before installing it.

tnx 4 using fixya,

drcool